This document was generated on 04/01/2019 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION Part Number: Status: 0622019900 Active Overview: Description: Application Tooling Micro-D Backshell Crimp Tool Kit, 15 Circuits Documents: RoHS Certificate of Compliance (PDF) General Product Family Series Comments Function Geographic Area Level of Automation More Detailed Tech Information Overview Product Name Tool Type UPC Warranty Disclaimer Application Tooling 207129 This tool kit is intended for use in the Basic Arbor Press. See Tooling Specification (PDF) Above, This tool kit is intended for use in the Basic Arbor Press. See Tooling Specification (PDF) Above Crimp Global Manual applicationtooling@molex.com Application Tooling N/A Hand Crimp Tool 800756404608 CAUTION: Molex tooling crimp specifications are valid only when used with Molex terminals and tooling manufactured by Molex and sold by Molex or authorized distributors ("Molex Tooling"). When using tooling other than Molex Tooling with Molex specific connector systems listed in our ATS documents, the Molex tooling qualification does not apply and the responsibility for full qualification of the connector system is that of the customer. Molex accepts no liability for connector performance or tooling support where tooling other than Molex Tooling is used or where Molex Tooling is modified. Material Info Reference - Drawing Numbers Application Tooling Documents ATS-622019900 Series image - Reference only EU ELV Not Reviewed EU RoHS China RoHS Not Reviewed REACH SVHC Not Reviewed Halogen-Free Status Not Reviewed For more information, please visit Contact US China ROHS ELV RoHS Phthalates Not Reviewed Not Reviewed Not Reviewed Search Parts in this Series 207129 Series Use With 622019800 Application Tooling | FAQ Description Product # 1.27mm Pitch 834229014 Commercial Micro D, Cable Receptacle Kit, 15 Circuits This document was generated on 04/01/2019 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION