NSD914XV2T1 Preferred Device High-Speed Switching Diode * * * * High-Speed Switching Applications Lead Finish: 100% Matte Sn (Tin) Qualified Maximum Reflow Temperature: 260C Extremely Small SOD-523 Package http://onsemi.com 1 CATHODE MAXIMUM RATINGS (TA = 25C) Symbol Max Unit Reverse Voltage VR 100 V Forward Current IF 200 mAdc IFM(surge) 500 mAdc Symbol Max Unit 120 1.57 mW mW/C RJA TBD C/W TJ, Tstg 150 C Rating Peak Forward Surge Current 2 ANODE THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR- 5 Board (Note 1) TA = 25C Derate above 25C Thermal Resistance Junction-to-Ambient Junction and Storage Temperature SOD-523 CASE 502 PLASTIC PD MARKING DIAGRAM XXd 1. FR-4 @ Minimum Pad Characteristic Symbol Min Max Unit 5D = Specific Device Code d = Date Code OFF CHARACTERISTICS Reverse Breakdown Voltage (IBR = 100 Adc) V(BR) 100 - Vdc - 25 5.0 nAdc Adc 4.0 pF Reverse Voltage Leakage Current (VR = 20 Vdc) (VR = 75 Vdc) VF Diode Capacitance (VR = 0, f = 1.0 MHz) CT - Forward Recovery Voltage (IF = 10 mAdc) VFR - 1.0 Vdc trr - 4.0 ns Reverse Recovery Time (IF = IR = 10 mAdc) Semiconductor Components Industries, LLC, 2003 March, 2003 - Rev. 0 ORDERING INFORMATION Device NSD914XV2T1 Package SOD-523 Shipping 4 mm pitch 3000/Tape & Reel Preferred devices are recommended choices for future use and best overall value. 1 Publication Order Number: NSD914XV2T1/D NSD914XV2T1 820 +10 V 2.0 k IF 100 H tp tr 0.1 F IF t trr 10% t 0.1 F 90% DUT 50 OUTPUT PULSE GENERATOR 50 INPUT SAMPLING OSCILLOSCOPE IR VR INPUT SIGNAL iR(REC) = 1.0 mA OUTPUT PULSE (IF = IR = 10 mA; MEASURED at iR(REC) = 1.0 mA) Notes: 1. A 2.0 k variable resistor adjusted for a Forward Current (IF) of 10 mA. Notes: 2. Input pulse is adjusted so IR(peak) is equal to 10 mA. Notes: 3. tp trr Figure 1. Recovery Time Equivalent Test Circuit TA = 85C I R , REVERSE CURRENT ( A) 10 TA = -40C 10 TA = 25C 1.0 0.1 0.2 0.4 0.6 0.8 1.0 TA = 125C 1.0 TA = 85C 0.1 TA = 55C 0.01 0.001 1.2 TA = 150C TA = 25C 10 0 20 30 VF, FORWARD VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 2. Forward Voltage Figure 3. Leakage Current 0.68 C D , DIODE CAPACITANCE (pF) I F, FORWARD CURRENT (mA) 100 0.64 0.60 0.56 0.52 0 2.0 4.0 6.0 VR, REVERSE VOLTAGE (VOLTS) Figure 4. Capacitance http://onsemi.com 2 8.0 40 50 NSD914XV2T1 PACKAGE DIMENSIONS SOD-523 CASE 502-01 ISSUE O -XA -YNOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. B D 2 PL 0.08 (0.003) M T X Y DIM A B C D J K S C K J S -TSEATING PLANE http://onsemi.com 3 MILLIMETERS MIN NOM MAX 1.10 1.20 1.30 0.70 0.80 0.90 0.50 0.60 0.70 0.25 0.30 0.35 0.07 0.14 0.20 0.15 0.20 0.25 1.50 1.60 1.70 MIN 0.043 0.028 0.020 0.010 0.0028 0.006 0.059 INCHES NOM 0.047 0.032 0.024 0.012 0.0055 0.008 0.063 MAX 0.051 0.035 0.028 0.014 0.0079 0.010 0.067 NSD914XV2T1 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 4 NSD914XV2T1/D