POSITIVE ADJUSTABLE
VOLTAGE REGULATOR
Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However
Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to
verify that datasheets are current before placing orders.
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 8372
Issue 2
Page 1 of 5
IP117SMD05 / LM117SMD05
IP117ASMD05 / LM117ASMD05
IP117HVSMD05 / LM117HVSMD05
IP117AHVSMD05/ LM117AHVSMD05
ABSOLUTE MAXIMUM RATINGS
(TC = 25°C unless otherwise stated)
Standard 40V
VI - VO Input – Output Voltage Differential HV Series 60V
IO Output Current Internally Limited
PD Power Dissipation Internally Limited
TJ Operating Junction Temperature Range -55 to +150°C
Tstg Storage Temperature Range -65 to +150°C
THERMAL PROPERTIES
Symbols Parameters Min. Typ. Max. Units
RθJC
Thermal Resistance, Junction To Case 3.5 °C/W
** This datasheet supersedes document 2829
DESCRIPTION
The 117 Series regulators are adjustable 3 terminal voltage regulators capable of supplying in excess of 1.5A over an output
voltage range of 1.25V to 40V (HV Series, 60V). The regulators are exceptionally easy to apply requiring only 2 external resistors
to set the output voltage.
Every effort has been made to make these devices easy to use and difficult to damage. Internal current limiting and power
limiting coupled with true thermal limiting prevents damage due to overloads or shorts, even if the regulators are not fastened
to a heat sink.
FEATURES
1.5A Output Current Guaranteed
Internal Thermal Overload Protection
Output Short Circuit Protected
Hermetic Ceramic Surface Mount Package
Screening Options Available
APPLICATIONS
Adjustable Power Supplies
System Power Supplies
Precision Voltage / Current Regulators
POSITIVE ADJUSTABLE
VOLTAGE REGULATOR
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 8372
Issue 2
Page 2 of 5
ELECTRICAL CHARACTERISTICS(1)(3)
(TC = 25°C unless otherwise stated)
LM117, IP117, LM117HV, IP117HV
Symbols Parameters Test Conditions Min.
Typ Max.
Units
IOUT = 10mA
1.200 1.250 1.300
VREF Reference Voltage 10mA IOUT IMAX, P PMAX,
3V (VIN-VOUT) VMAX
1.200 1.250 1.300
V
0.010 0.020
IN
OUT
V
V
Line Regulation (2)
3V (VIN-VOUT) VMAX,
IOUT = 10mA
0.020 0.050
%/V
VOUT 5V
5 15 mV
VOUT 5V
0.1 0.3 %
VOUT 5V
20 50 mV
OUT
I
OUT
V
Load Regulation (2)(3) 10mA
IOUT
IMAX
VOUT
5V
0.3 1.0 %
Thermal Regulation VIN = 14.58V, IOUT = 1.5A,
PD = 20W, TA = 25°C, 20ms Pulse
0.030 0.070 %/W
VOUT = 10V CADJ = 0
65
Ripple Rejection
f = 120Hz CADJ = 10µF
66 80
dB
IADJ Adjust Pin Current
50 100
IADJ Adjust Pin Current Change 10mA
IOUT
IMAX,
2.5V
(VIN-VOUT)
VMAX
0.2 5
µA
(VIN - VOUT)
=
40V
3.5 5
IMIN Minimum Load Current (VIN - VOUT)
=
60V (HV Series)
(HV Series)(HV Series)
(HV Series)
3.5 7
mA
(VIN - VOUT)
15V
1.5 2.2
(VIN - VOUT) = 40V
0.3 0.5
ICL Current Limit
(VIN - VOUT) = 60V (HV Series)
(HV Series)(HV Series)
(HV Series)
0.1
A
TEMP
OUT
V
Temperature Stability
1.0
TIME
OUT
V
Long Term Stability TA = 125°C, 1000Hrs
0.3 1.0
en RMS Output Noise
(% of VOUT) TA = 25°C, 10Hz f 10KHz
0.001
%
Notes
NotesNotes
Notes
The denotes the specifications which apply over the full operating temperature range.
(1) Test conditions unless otherwise stated: VIN - VOUT = 5V, IOUT = 0.5A, PMAX = 20W, IMAX = 1.5A
(2) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating
effects are covered under thermal regulation specifications. Load regulation is measured at the junction of the wide and narrow portion of
the output lead.
(3) VMAX = 40V for LM117, IP117, LM117A, IP117A
VMAX = 60V for LM117HV, IP117HV, LM117AHV, IP117AHV
POSITIVE ADJUSTABLE
VOLTAGE REGULATOR
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 8372
Issue 2
Page 3 of 5
ELECTRICAL CHARACTERISTICS(1)(3)
(TC = 25°C unless otherwise stated)
LM117A, IP117A, LM117AHV, IP117AHV
Symbols Parameters Test Conditions Min.
Typ Max.
Units
IOUT = 10mA
1.238 1.250 1.262
VREF Reference Voltage 10mA IOUT IMAX, P PMAX,
3V (VIN-VOUT) VMAX
1.225 1.250 1.270
V
0.005 0.010
IN
OUT
V
V
Line Regulation (2)
3V (VIN-VOUT) VMAX,
IOUT = 10mA
0.010 0.020
%/V
VOUT 5V
5 15 mV
VOUT 5V
0.1 0.3 %
VOUT 5V
15 50 mV
OUT
I
OUT
V
Load Regulation (2)(3) 10mA IOUT IMAX
VOUT 5V
0.3 1.0 %
Thermal Regulation VIN = 14.58V, IOUT = 1.5A,
PD = 20W, TA = 25°C, 20ms Pulse
0.002 0.020 %/W
VOUT = 10V CADJ = 0
65
Ripple Rejection
f = 120Hz CADJ = 10µF
66 80
dB
IADJ Adjust Pin Current
50 100
IADJ Adjust Pin Current Change 10mA IOUT IMAX,
2.5V (VIN-VOUT) VMAX
0.2 5
µA
(VIN - VOUT) = 40V
3.5 5
IMIN Minimum Load Current (VIN - VOUT) = 60V (HV Series)
(HV Series)(HV Series)
(HV Series)
3.5 7
mA
(VIN - VOUT) 15V
1.5 2.2
(VIN - VOUT) = 40V
0.3 0.5
ICL Current Limit
(VIN - VOUT) = 60V (HV Series)
(HV Series)(HV Series)
(HV Series)
0.1
A
TEMP
OUT
V
Temperature Stability
1.0 2
TIME
OUT
V
Long Term Stability TA = 125°C, 1000Hrs
0.3 1.0
en RMS Output Noise
(% of VOUT) TA = 25°C, 10Hz f 10KHz
0.001
%
Notes
NotesNotes
Notes
The denotes the specifications which apply over the full operating temperature range.
(1) Test conditions unless otherwise stated: VIN - VOUT = 5V, IOUT = 0.5A, PMAX = 20W, IMAX = 1.5A
(2) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating
effects are covered under thermal regulation specifications. Load regulation is measured at the junction of the wide and narrow portion of
the output lead.
(3) VMAX = 40V for LM117, IP117, LM117A, IP117A
VMAX = 60V for LM117HV, IP117HV, LM117AHV, IP117AHV
POSITIVE ADJUSTABLE
VOLTAGE REGULATOR
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 8372
Issue 2
Page 4 of 5
APPLICATIONS INFORMATION
OE Vpp
READ 0V 5V
WRITE
BYTE 5V 21V
CHIP ERASE
12V
21V
ADJ
IP317A
RETURN
121
383
LM301A
8
6
4
3
2
7
1
25
5
µ
F
1k
25
V
IN
(Max Drop 300mV) OUTPUT
V
IN
V
IN
V
OUT
R
P
R
L
RETURN
1k
1k
383
121
ADJ
IP317A
V
IN
V
OUT
2N3904
TTL
1
µ
F
V
IN
V
OUT
5V
249
1%
ADJ
IP317A
V
IN
V
OUT
1
µ
F
+24V To
750
1%
3.24k
1%
V
PP
39k
18k
100k
To OE
READ
WRITE
BYTE ERASE
CHIP ERASE
All gates 7406.
R1
121
ADJ
IP317A
V
IN
V
OUT
1
µ
F
V
IN
C1
10
µ
F
5V
R2
383
20k
10k
50
2N3906
243
ADJ
IP317A
V
IN
V
OUT
V
IN
1N4001
50k
12V
THERMALLY
COUPLE
2816 EEPROM Supply Programmer for
Read / Write Control
Remote Sensing
5V Regulator with Shut Down
C1 improves ripple rejection
Xc should be small compared to R2
Improving Ripple Rejection
Temperature Compensated
Lead-Acid Battery Charger
IP
117
IP117
IP117
IP117
IP117
POSITIVE ADJUSTABLE
VOLTAGE REGULATOR
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 8372
Issue 2
Page 5 of 5
MECHANICAL DATA
Dimensions in mm (inches)
SMD05 (TO276AA)
Pin 1 = ADJ. Pin 2 = VOUT Pin 3 = VIN
2
1 3
2.41 (0.095)
(0.030)
min.
3.05 (0.120)
5.72 (.225)
0.127 (0.005)
(0.296)
10.16 (0.400)
0.76
(0.030)
min.
3.175 (0.125)
Max.
0.50 (0.020)
max.
7.54
0.76
2.41 (0.095)
0.127 (0.005)
(0.286) 7.26
16 PLCS
0.50(0.020)
0.127 (0.005)