Surface mount type TPC RoHS compliance Series Low profile TPC series has low profile and low ESR. TPC series aids in the miniaturization of any products. B1 size is miniaturized, low profile version of TPC series. TPC TPB (Standard) Low profile Specifications Items Condition Rated voltage (V) - 2.5 4.0 6.3 8.0 10 12.5 Surge voltage (V) - 2.9 4.6 7.2 9.2 12 14 Category temperature range () - Capacitance tolerance () 120Hz/20 M : 20 120Hz/20 10 to 330 Leakage current Packing specifications haracteristics 0.6 to 2.0 105 Z/Z20 0.6 to 2.0 C/C Within20% of the initial value DF < Within the initial limit C/C Within40%,-20% of the initial value < TPF TPG TPE TPB TPC TPD TA TH TQC 98 Dimensions 3 times of the initial limit Within5% of the initial value Within the initial limit LC < 3 times of the initial limit Size list RV F 2.5 RV : Rated voltage 4.0 6.3 8.0 10 10 B1 W 22 B1 33 B1 47 56 S W1 S (unit: mm) Size code L 0.2 W 0.2 B1 B1 C1 D2,C1 H 0.1 S 0.2 W1 0.1 B1 3.5 2.8 1.1 0.8 2.2 C1 6.0 3.2 1.4 1.3 1.8 D2 7.3 4.3 1.9 1.3 2.4 C1 B1 B1 68 100 12.5 B1 15 H Tantalum Solid Capacitors with Conductive Polymer TPLTPLF DF Rated temp. 85 products : 85 Reliability TPU 1.5 times of the initial limit < C/C L TPSF 1.5 times of the initial limit LC DF 105, 1,000 cycles, 1k discharge resistance, surge voltage applied Surge Technical data Fundamental structure 100kHz/20 LC Marking Recommended land pattern dimension Recommended soldering condition Please see the attached characteristics list -55 Z/Z20 60, 90 to 95%RH, 500h, No-applied voltage Damp heat (Steady State) Selection guide Products list Explanation of part numbers Please see the attached characteristics list 100kHz/20 105, 2,000h, rated voltage applied C1 size : 1,000h Rated temp. 85 products: 85, 1,000h, rated voltage applied Guidelines and precautions for use Image of case size Please see the attached characteristics list Characteristics of impedance ratio at high temp. and low temp. Endurance Series system diagram 120Hz/20 Rated voltage applied, after 5 minutes Equivalent series resistance (ESR) POSCAP Line-up -55 to 105 Rated capacitance range (F) Dissipation Factor (DF) T P C Specifications C1 150 D2 330 D2 D2 D2 D2 Surface mount type TPC Series TPC series characteristics list Part number Maximum allowable MSL Rated Rated Rated Category Category LC ESR DF voltage temperature capacitance voltage temperature A mmax ripple current Reflow Reflow mArms temp. max temp. (V) () F V max/5min. 100kHz/20 100kHz1 < < D2 250 12TPC15M 12.5 85 15 10 105 10.0 18.8 80 800 3 3 12TPC10M 12.5 85 10 10 105 10.0 12.5 80 800 3 3 10TPC33MB 10 85 33 8.0 105 10.0 33.0 70 1000 3 3 8TPC22M 8.0 85 22 6.3 105 10.0 17.6 70 1000 3 3 6TPC47MB 6.3 85 47 5.0 105 10.0 29.6 70 1000 3 3 6TPC33M 6.3 85 33 5.0 105 10.0 20.8 70 1000 3 3 4TPC47M 4.0 85 47 3.2 105 10.0 18.8 70 1000 3 3 2R5TPC56M 2.5 85 56 2.0 105 10.0 14.0 70 1000 3 3 8TPC33M 8.0 105 33 8.0 105 10.0 26.4 70 1200 3 3 6TPC100MC 6.3 85 100 5.0 105 10.0 63.0 55 1300 3 3 6TPC68M 6.3 105 68 6.3 105 10.0 42.8 55 1300 3 3 4TPC100M 4.0 105 100 4.0 105 10.0 40.0 55 1300 3 3 10TPC100M 10 105 100 10 105 10.0 100.0 45 1700 3 2a 10TPC68M 10 105 68 10 105 10.0 68.0 45 1700 3 2a T P C POSCAP Line-up 8TPC150M 8.0 105 150 8.0 105 10.0 120.0 40 1900 3 2a 6TPC330MA 6.3 85 330 5.0 105 10.0 207.9 40 1900 3 2a Guidelines and precautions for use 6TPC150M 6.3 105 150 6.3 105 10.0 94.5 40 1900 3 2a Series system diagram 6TPC100M 6.3 105 100 6.3 105 10.0 63.0 45 1700 3 2a Please refer to page 65 for the compensation coefficient of maximum allowable ripple current. 1 100k to 500kHz,45 Selection guide C1 Image of case size Products list Explanation of part numbers Packing specifications Marking Technical data B1 260 Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics Reliability Tantalum Solid Capacitors with Conductive Polymer Size code TPSF TPU TPLTPLF TPF TPG TPE TPB TPC TPD TA TH TQC 99