SPEC NO: DSAA8436 REV NO: V.10 DATE: JUN/21/2011 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000359
3.2x1.6mm SMD CHIP LED LAMP
Part Number: AP3216MGC Mega Green
Features
z3.2mmx1.6mm SMT LED, 1.1mm thickness.
zLow power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Mega Green source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.0079") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAA8436 REV NO: V.10 DATE: JUN/21/2011 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000359
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
AP3216MGC Mega Green (AlGaInP) Water Clear 36 70 120°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Mega Green 574 nm IF=20mA
λD [1] Dominant Wavelength Mega Green 570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Mega Green 26 nm IF=20mA
C Capacitance Mega Green 20 pF VF=0V;f=1MHz
VF [2] Forward Voltage Mega Green 2.1 2.5 V IF=20mA
IR Reverse Current Mega Green 10 uA VR=5V
Parameter Mega Green Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAA8436 REV NO: V.10 DATE: JUN/21/2011 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000359
Mega Green AP3216MGC
SPEC NO: DSAA8436 REV NO: V.10 DATE: JUN/21/2011 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000359
AP3216MGC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAA8436 REV NO: V.10 DATE: JUN/21/2011 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000359
PACKING & LABEL SPECIFICATIONS AP3216MGC
