PRODUCT: RGEF400K DOCUMENT: SCD 25636 PCN: E90664 REV LETTER: C REV DATE: JULY 19, 2007 PAGE NO: 1 OF 1 PolySwitch(R) PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com Overcurrent Protection Device Raychem Circuit Protection Products Specification Status: Released Electrical Rating Voltage: 16V MAX Current: 100A MAX Insulating Material: Cured, Flame Retardant Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 20 AWG Tin Plated Copper (0.81mm [0.032] nom. diameter) Marking: TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX 7.9 8.9 15.4 (0.31) (0.35) (0.61) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.3) E MAX - MIN 2.0 (0.08) MAX 3.0 (0.12) F TYP 1.2 (0.05) TABLE II. PERFORMANCE RATINGS: I HOLD RATED CURRENT CURRENT RATINGS INITIAL RESISTANCE VALUES TIME TO TRIP AMPS AT 25C HOLD 4.0 AMPS AT 25C HOLD TRIP 4.0 6.8 OHMS AT 25C MIN MAX 0.0210 0.0390 SECONDS AT 25C, 20A MAX 1.7 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: R1 MAX 1 HR. POST TRIP RESISTANCE STANDARD TRIP OHMS AT 25C MAX 0.0600 WATTS AT 25C TYP 2.4 UL, CSA, TUV. PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation or bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant TRIPPEDSTATE POWER DISSIPATION ELV Compliant (c) 2005, 2007 Tyco Electronics Corporation. All rights reserved.. Pb-Free