KEMET Organic Capacitor (KO-CAP(R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Overview The KEMET Tantalum Stack Polymer (TSP) Electrolytic is designed to provide the highest capacitance/voltage ratings in a surface mount configuration. KEMET's T540 COTS Polymer Electrolytic for High Reliabilty Applications capacitors are utilized in stacks of 2, 3, 4 and 6 components to achieve a broad range of capacitance and voltage ratings. The T540 COTS offers component level surge current testing options and standard and low ESR options. As with other KEMET KO-CAPs, this series may be operated at steady state voltages up to 90% of rated voltage for part types with rated voltages of greater or equal to 10 volts and up to 80% of rated voltage for part types greater than 10 volts. Stacking configurations allow for custom capacitance/ voltage solutions and very low ESR options. The TSP series is the first polymer electrolytic capacitor available with failure rate options as defined by KEMET's Polymer Electrolytic Reliability Assessment method (PERA). The PERA method utilizes accelerated conditions (voltage and temperature) applied to board mounted samples to assess long term device reliability.The failure rates available are B (0.1%/Khrs.), C (0.01%/Khrs.) and D (0.001%/Khrs). The PERA method was developed based on over ten (10) years of research and is described in numerous papers available on www.kemet.com. Note: Custom stacking solutions are also available with other KEMET Polymer Electrolytic Surface Mount products. Please contact KEMET Sales for availability. Benefits * * * * * * * * * * * * * * Polymer cathode technology High capacitance Surface mountable Capacitance values of 20 F to 6,000 F Capacitance can be custom specified Voltage ratings of 3 VDC to 63 VDC High volumetric efficiency Ultra low ESR Surge capability Operating temperature range of -55C to +125C Laser-marked case Use up to 90% of rated voltage for part types 10 volts Use up to 80% of rated voltage for part types > 10 volts KEMET's PERA method testing Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Applications Typical applications include decoupling and filtering in a variety of market segments. The T540 Polymer COTS stack devices can be utilized in military and aerospace applications. Other KEMET series can be utilized in filtering and decoupling applications to service various market segments. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. One world. One KEMET (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 1 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET's K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T SP Capacitor Class Series T= Stacks Tantalum Polymer cathode 2D 207 M 010 A Rated Failure Case Capacitance Capacitance Voltage Rate/ Size Code (pF) Tolerance (VDC) Design 2B, 3B, 4B, 6B, 2C, 2D, 3D, 4D, 6D, 2X, 3X, 4X, 6X First two digits represent significant figures. Third digit specifies number of zeros. M= 20% 003 = 3 004 = 4 006 = 6.3 010 = 10 016 = 16 025 = 25 035 = 35 050 = 50 063 = 63 A= N/A H 65 20 D540 Termination Finish Surge ESR C-Spec 2* 10 = ESR standard 20 = ESR low First digit represents outer leadframe finish D = Silver-plated (Ag) standard H = Solder-plated (SnPb 5% Pb minimum) T = 100% Tin (Sn) Second, third and fourth digit designates discrete component series. 540 = T540 541 = T541 543 = T543 H = Standard solder-coated (SnPb 5% Pb minimum) T = 100% Tin 65 = No Surge 66 = 10 cycles at 25C 67 = 10 cycles at -55C and 85C * H and T leadframe finish options for Cspec 2 are available upon request Note: Custom discrete component stacking solutions are also available with other KEMET Polymer Electrolytic Surface Mount series/products. Please contact KEMET Sales for availability. Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 125C 20 - 6,000 F at 120 Hz/25C M Tolerance (20%) 3 - 63 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.1 CV (A) at rated voltage after 5 minutes (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 2 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Qualification Test Condition Characteristics C/C Endurance 105C at rated voltage, 2,000 hours 125C at 2/3 rated voltage, 2,000 hours initial limit DCL 1.25 x IL at 125C ESR 2 x initial limit C/C Thermal Shock KEMET specified test, mounted, -55C to 125C, 5 cycles 85C, 1.15 x rated voltage 1,000 cycles Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Mechanical Vibration 125C, 0.77 x rated voltage 1,000 cycles MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Within 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Surge Voltage Within 5% of initial value DF C/C Surge Voltage Within -20/+10% of initial value DF Within 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10 of initial value DF Within initial limits DCL Within initial limits T2029_TSP * 8/27/2018 3 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Reliability KO-CAP capacitors have an average failure rate of 0.5 %/1,000 hours at category voltage, UC, and category temperature, TC. These capacitors are qualified using industry test standards at UC and TC. The minimum test time (1,000 or 2,000 hours) is dependent on the product series. The actual life expectancy of KO-CAP capacitors increases when application voltage, UA, and application temperature, TA, are lower than UC and TC. As a general guideline, when UA < 0.9 * UC and TA < 85C, the life expectancy will typically exceed the useful lifetime of most hardware (> 10 years). The lifetime of a KO-CAP capacitor at a specific application voltage and temperature can be modeled using the equations below. A failure is defined as passing enough current to blow a 1-Amp fuse. The calculation is an estimation based on empirical results and is not a guarantee. VAF = [ ( TAF = e ( ) UC n UA Ea 1 1 k 273+TA 273+TC )] where: TAF = acceleration factor due to temperature, unitless Ea = activation energy, 1.4 eV where: VAF = acceleration factor due to voltage, unitless UC = category voltage, volt UA = application voltage, volt k = Boltzmann's constant, 8.617E-5 eV/K TA = application temperature, C n = exponent, 16 TC = category temperature, C AF = VAF * TAF LifeU ,T = LifeU ,T * AF A A C C where: where: LifeUA, TA = guaranteed life application voltage and temperature, years AF = acceleration factor, unitless LifeUC, TC = guaranteed life category voltage and temperature, years TAF = accerlation factor due to temperature, unitless VAF = acceleration factor due to voltage, unitless AF = acceleration factor, unitless Reliability Table 1 - Common temperature range classifications 85C (TR) / 85C (TC) 105C (TR) / 105C (TC) 105C (TR) / 125C (TC) Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated Voltage (TR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated Voltage (TR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 1.7 2.7 4.2 5.4 6.7 8.4 10.7 13.4 16.8 23.5 33.5 42.2 50.3 Terms: Category Voltage, UC : Maximum recommended peak DC operating voltage for continuous operation at the category temperature, TC Rated Voltage, U R : Maximum recommended peak DC operating voltage for continuous operation up to the rated temperature, TR Category Temperature, TC : Maximum recommended operating temperature; voltage derating may be required at TC Rated Temperature, TR : Maximum recommended operating temperature without voltage derating; TR is equal to or lower than TC (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 4 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Dimensions - Millimeters (Inches) Metric will govern TSP2 KEMET 2 Component Stack Dimensions Case Code L W H W2 TSM2 TSP2 TSM2 TSP2 H2 6.5 0.38 3.3 0.2 5.3 0.38 2.5 0.2 4.5 0.38 1.4 0.38 (0.258 0.015) (0.130 0.008) (0.210 0.015) (0.100 0.008) (0.176 0.015) (0.055 0.015) 2B 4.1 0.38 3.1 0.2 4.3 0.38 2.3 0.2 3.1 0.38 0.76 0.38 (0.162 0.015) (0.122 0.008) (0.170 0.015) (0.090 0.008) (0.124 0.015) (0.030 0.015) 2D 8.0 0.38 4.4 0.2 6.2 0.38 3.0 0.2 4.8 0.38 1.9 0.38 (0.315 0.015) (0.174 0.008) (0.245 0.015) (0.120 0.008) (0.192 0.015) (0.075 0.015) 2X 8.00.38 (0.3150.015) 8.90.38 (0.3520.015) 3.00.2 (0.1200.008) 6.90.38 (0.2720.015) TSP3 KEMET 3 Component Stack Dimensions W H W2 H2 P 3B 4.10.38 (0.1620.015) 3.10.2 (0.1220.008) 6.30.38 (0.2480.015) 2.30.2 (0.0900.008) 5.30.38 (0.2100.015) 0.760.38 (0.0300.015) 3D 8.00.38 (0.3150.015) 4.40.2 (0.1740.008) 9.20.38 (0.3650.015) 3.00.2 (0.1200.008) 7.70.38 (0.3040.015) 1.90.38 (0.0750.015) 8.00.38 (0.3150.015) 4.40.2 (0.1740.008) 13.30.38 (0.5250.015) 3.00.2 (0.1200.008) 11.00.38 (0.4360.015) ANODE (+) END VIEW L W SIDE VIEW ANODE (+) END VIEW L L W 4B 4.10.38 (0.1620.015) 6.10.2 H (0.2420.008) 4.30.38 (0.1700.015) 8.00.38 (0.3150.015) P P 4D 4X TSM3 TSP3TSP6 TSM3 TSP3 8.00.38 (0.3150.015) H P 5.30.2 (0.2100.008) 3.10.38 (0.1240.015) 0.760.38 (0.0300.015) 8.90.2 (0.3500.008) 6.2 0.38 7.40.2 (0.2450.015) (0.2920.008) 4.80.38 (0.1920.015) 1.90.38 (0.0750.015) 8.90.2 (0.3500.008) W2 8.90.38 (0.3520.015) L Case Code 7.40.2 6.90.38 1.90.38 (0.2920.008) (0.272 0.015) (0.0750.015) ANODE (+) END VIEW KEMET 6 Component Stack Dimensions SIDE VIEW L W2 H2 L W ANODE (+) END VIEW W H P H2 P 6.30.38 (0.2480.015) 5.30.2 (0.2100.008) 5.30.38 (0.2100.015) 0.760.38 (0.0300.015) 6B 4.10.38 (0.1620.015) 6.10.2 (0.2420.008) 6D 8.00.38 (0.3150.015) 8.90.2 (0.3500.008) 9.20.38 (0.3650.015) H2 7.40.2 (0.2920.008) 7.70.38 (0.3040.015) 1.90.38 (0.0750.015) 6X 8.00.38 (0.3150.015) 8.90.2 H (0.3500.008) 13.30.38 (0.5250.015) 7.40.2 11.00.38 H2 (0.2920.008) (0.4360.015) 1.90.38 (0.0750.015) H W W2 H2 W2 SIDE VIEW ANODE (+) END VIEW L W SIDE VIEW ANODE (+) END VIEW L W H H2 H H2 P W2 SIDE VIEW P ANODE (+) END VIEW L W2 SIDE VIEW W H2 H P W2 P W2 SIDE VIEW ANODE (+) END VIEW L W SIDE VIEW ANODE (+) END VIEW L W H2 H H2 H H2 P W2 P P W2 P (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com W ANODE (+) END VIEW H TSM6 TSP6 TSM6 TSP6 W2 W H P L H2 H2 H H2 TSM4 1.90.38 (0.0750.015) TSP4 TSM4 TSP4 W2 SIDE VIEW H ANODE (+) END VIEW L KEMET 4 Component W Stack Dimensions Case Code W SIDE VIEW TSM3 TSP3 TSM3 TSP3 L SIDE VIEW L 1.90.38 (0.0750.015) Case Code TSM2 3X TSP2 TSM2 TSP2TSP4 ANODE (+) END VIEW P 2C 4.40.2 (0.1740.008) SIDE VIEW W2 W2 T2029_TSP * 8/27/2018 5 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Capacitance and Rated Voltage Chart Capacitance f Code Rated Voltage 3V 4V 6.3V 10 16 25 35 50 63 20 206 2X 30 306 2X, 3X 40 406 4X 44 446 45 456 60 606 66 666 88 886 90 906 94 946 2X 3X 4X, 6X 2B 2X 4X 6X 2D 2X 99 996 100 107 130 137 140 147 3D 3X 190 197 4D 4X 198 207 200 207 260 267 272 277 280 287 3B 2B 3B 4B 440 447 2D 450 457 3B 600 607 4B 660 667 2D 880 887 900 907 940 947 990 997 4X, 6X 3X 6X 6X 2D 6B 2X 4D 2D 6X 6X 2X 3X 4X 2D 3D, 2X 2X, 3X 4D 4X 6D 6X 3D 3X 3X 2X 4D 6D, 4X 4X, 6X 3X 6X 6X 4D 6B 2D 138 1360 148 1400 148 3D 1900 198 4D 1980 208 2000 208 3D 2X, 3X 2700 278 4D 4X 2800 288 608 2D 6B 1300 6000 3B 6D 307 308 4X 4B 407 408 2X 3X 4X 300 3000 4B 3X 6B 2B 400 4000 2X, 3X 2X 2D 4X 6D 6D 6X 3X 6D 4X, 6X 6X (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 6 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Table 1A - TSP2 Ratings & Part Number Reference Rated Voltage Rated Case Code/ Capacitance Case Size VDC @ 105C F KEMET/EIA 4 6.3 10 3 3 4 4 6.3 10 10 10 16 4 4 6.3 10 16 16 16 25 35 35 50 50 63 63 200 130 66 660 1400 440 940 660 200 300 440 94 1300 2000 940 660 300 440 660 130 66 94 44 66 20 30 2B 2B 2B 2D 2D 2D 2D 2D 2D 2D 2D 2D 2X 2X 2X 2X 2X 2X 2X 2X 2X 2X 2X 2X 2X 2X KEMET Part Number DC Leakage (See below for part options) TSP2B207M004A(3)(1)(2)D540 TSP2B137M006A(3)(1)(2)D540 TSP2B666M010A(3)(1)(2)D540 TSP2D667M003A(3)(1)(2)D540 TSP2D148M003A(3)(1)(2)D540 TSP2D447M004A(3)(1)(2)D540 TSP2D947M004A(3)(1)(2)D540 TSP2D667M006A(3)(1)(2)D540 TSP2D207M010A(3)(1)(2)D540 TSP2D307M010A(3)(1)(2)D540 TSP2D447M010A(3)(1)(2)D540 TSP2D946M016A(3)(1)(2)D540 TSP2X138M004A(3)(1)(2)D541 TSP2X208M004A(3)(1)(2)D541 TSP2X947M006A(3)(1)(2)D541 TSP2X667M010A(3)(1)(2)D541 TSP2X307M016A(3)(1)(2)D541 TSP2X447M016A(3)(1)(2)D541 TSP2X667M016A(3)(1)(2)D541 TSP2X137M025A(3)(1)(2)D541 TSP2X666M035A(3)(1)(2)D541 TSP2X946M035A(3)(1)(2)D541 TSP2X446M050A(3)(1)(2)D541 TSP2X666M050A(3)(1)(2)D541 TSP2X206M063A(3)(1)(2)D541 TSP2X306M063A(3)(1)(2)D541 A @ +25C Max/5 Min 80 86 66 198 408 176 376 416 200 300 440 152 520 800 564 660 480 704 1056 325 231 329 220 330 126 189 DF Standard ESR Low ESR % @ +25C 120 Hz Max 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 m @ +25C 100 kHz Max 40 40 40 13 13 13 20 20 28 28 13 33 5 5 5 5 20 20 25 25 30 30 40 40 75 25 m @ +25C 100 kHz Max N/A N/A N/A N/A N/A N/A 13 13 13 13 N/A 18 3 3 3 3 12 12 12 N/A N/A N/A N/A N/A 50 N/A Maximum Operating Temp C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25C, 67 = 10 cycles -55C +85C. Designates surge current option. (2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option. (3) To complete KEMET part number, insert H = Standard solder coated or T = 100% Tin Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 7 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Table 1B - TSP3 Ratings & Part Number Reference Rated Voltage Rated Case Code/ Capacitance Case Size VDC @ 105C F KEMET/EIA 3 4 6.3 10 3 4 6.3 10 16 4 4 6.3 10 16 16 16 25 35 35 50 50 63 63 450 300 200 99 2000 1400 990 660 140 2000 3000 1400 990 450 660 990 200 100 140 66 100 30 45 3B 3B 3B 3B 3D 3D 3D 3D 3D 3X 3X 3X 3X 3X 3X 3X 3X 3X 3X 3X 3X 3X 3X KEMET Part Number DC Leakage (See below for part options) TSP3B457M003A(3)(1)(2)D540 TSP3B307M004A(3)(1)(2)D540 TSP3B207M006A(3)(1)(2)D540 TSP3B996M010A(3)(1)(2)D540 TSP3D208M003A(3)(1)(2)D540 TSP3D148M004A(3)(1)(2)D540 TSP3D997M006A(3)(1)(2)D540 TSP3D667M010A(3)(1)(2)D540 TSP3D147M016A(3)(1)(2)D540 TSP3X208M004A(3)(1)(2)D541 TSP3X308M004A(3)(1)(2)D541 TSP3X148M006A(3)(1)(2)D541 TSP3X997M010A(3)(1)(2)D541 TSP3X457M016A(3)(1)(2)D541 TSP3X667M016A(3)(1)(2)D541 TSP3X997M016A(3)(1)(2)D541 TSP3X207M025A(3)(1)(2)D541 TSP3X107M035A(3)(1)(2)D541 TSP3X147M035A(3)(1)(2)D541 TSP3X666M050A(3)(1)(2)D541 TSP3X107M050A(3)(1)(2)D541 TSP3X306M063A(3)(1)(2)D541 TSP3X456M063A(3)(1)(2)D541 A @ +25C Max/5 Min 135 120 129 99 612 564 624 660 226 800 1200 840 990 720 1056 1584 500 350 490 330 500 189 283.5 DF Standard ESR Low ESR % @ +25C 120 Hz Max 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 m @ +25C 100 kHz Max 27 27 27 27 9 14 14 9 22 3 3 3 3 15 15 18 18 20 20 25 25 50 18 m @ +25C 100 kHz Max N/A N/A N/A N/A N/A 9 9 N/A 12 2 2 2 2 9 9 9 N/A N/A N/A N/A N/A 35 N/A Maximum Operating Temp C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25C, 67 = 10 cycles -55C +85C. Designates surge current option. (2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option. (3) To complete KEMET part number, insert H = Standard solder coated or T = 100% Tin Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 8 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Table 1C - TSP4 Ratings & Part Number Reference Rated Voltage Rated Case Code/ Capacitance Case Size VDC @ 105C F KEMET/EIA 3 4 6.3 10 3 4 4 6.3 10 10 16 4 4 6.3 10 16 16 16 25 35 35 50 50 63 63 600 400 270 130 2700 880 1900 1300 400 880 190 2700 4000 1900 1300 600 880 1300 260 130 190 88 130 40 60 4B 4B 4B 4B 4D 4D 4D 4D 4D 4D 4D 4X 4X 4X 4X 4X 4X 4X 4X 4X 4X 4X 4X 4X 4X KEMET Part Number DC Leakage (See below for part options) TSP4B607M003A(3)(1)(2)D540 TSP4B407M004A(3)(1)(2)D540 TSP4B277M006A(3)(1)(2)D540 TSP4B137M010A(3)(1)(2)D540 TSP4D278M003A(3)(1)(2)D540 TSP4D887M004A(3)(1)(2)D540 TSP4D198M004A(3)(1)(2)D540 TSP4D138M006A(3)(1)(2)D540 TSP4D407M010A(3)(1)(2)D540 TSP4D887M010A(3)(1)(2)D540 TSP4D197M016A(3)(1)(2)D540 TSP4X278M004A(3)(1)(2)D541 TSP4X408M004A(3)(1)(2)D541 TSP4X198M006A(3)(1)(2)D541 TSP4X138M010A(3)(1)(2)D541 TSP4X607M016A(3)(1)(2)D541 TSP4X887M016A(3)(1)(2)D541 TSP4X138M016A(3)(1)(2)D541 TSP4X267M025A(3)(1)(2)D541 TSP4X137M035A(3)(1)(2)D541 TSP4X197M035A(3)(1)(2)D541 TSP4X886M050A(3)(1)(2)D541 TSP4X137M050A(3)(1)(2)D541 TSP4X406M063A(3)(1)(2)D541 TSP4X606M063A(3)(1)(2)D541 A @ +25C Max/5 Min 180 160 172 132 816 352 752 832 400 880 301 1080 1600 1140 1300 960 1408 2080 650 455 665 440 650 252 378 DF Standard ESR Low ESR % @ +25C 120 Hz Max 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 m @ +25C 100 kHz Max 20 20 20 20 7 7 10 10 14 7 17 3 3 3 3 10 10 12 12 15 15 20 20 40 12 m @ +25C 100 kHz Max N/A N/A N/A N/A N/A N/A 7 7 7 N/A 9 2 2 2 2 8 8 8 N/A N/A N/A N/A N/A 25 N/A Maximum Operating Temp C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25C, 67 = 10 cycles -55C +85C. Designates surge current option. (2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option. (3) To complete KEMET part number, insert H = Standard solder coated or T = 100% Tin Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 9 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Table 1D - TSP6 Ratings & Part Number Reference Rated Voltage Rated Case Code/ Capacitance Case Size VDC @ 105C F KEMET/EIA 3 4 6.3 10 3 4 6.3 10 10 16 4 4 6.3 10 16 16 16 25 35 35 50 50 63 63 900 600 400 200 4100 2800 2000 900 1300 280 4000 6000 2800 2000 900 1300 2000 400 200 280 130 200 60 90 6B 6B 6B 6B 6D 6D 6D 6D 6D 6D 6X 6X 6X 6X 6X 6X 6X 6X 6X 6X 6X 6X 6X 6X KEMET Part Number DC Leakage (See below for part options) TSP6B907M003A(3)(1)(2)D540 TSP6B607M004A(3)(1)(2)D540 TSP6B407M006A(3)(1)(2)D540 TSP6B207M010A(3)(1)(2)D540 TSP6D418M003A(3)(1)(2)D540 TSP6D288M004A(3)(1)(2)D540 TSP6D208M006A(3)(1)(2)D540 TSP6D907M010A(3)(1)(2)D540 TSP6D138M010A(3)(1)(2)D540 TSP6D287M016A(3)(1)(2)D540 TSP6X408M004A(3)(1)(2)D541 TSP6X608M004A(3)(1)(2)D541 TSP6X288M006A(3)(1)(2)D541 TSP6X208M010A(3)(1)(2)D541 TSP6X907M016A(3)(1)(2)D541 TSP6X138M016A(3)(1)(2)D541 TSP6X208M016A(3)(1)(2)D541 TSP6X407M025A(3)(1)(2)D541 TSP6X207M035A(3)(1)(2)D541 TSP6X287M035A(3)(1)(2)D541 TSP6X137M050A(3)(1)(2)D541 TSP6X207M050A(3)(1)(2)D541 TSP6X606M063A(3)(1)(2)D541 TSP6X906M063A(3)(1)(2)D541 A @ +25C Max/5 Min 270 240 258 198 1224 1128 1248 900 1320 452 1600 2400 1680 2000 1440 2080 3200 1000 700 980 650 1000 378 567 DF Standard ESR Low ESR % @ +25C 120 Hz Max 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 m @ +25C 100 kHz Max 14 14 14 14 5 7 7 10 5 11 2 2 2 2 8 8 9 9 10 10 12 12 25 9 m @ +25C 100 kHz Max N/A N/A N/A N/A N/A 5 5 5 N/A 6 1 1 1 1 5 5 5 N/A N/A N/A N/A N/A 20 N/A Maximum Operating Temp C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25C, 67 = 10 cycles -55C +85C. Designates surge current option. (2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option. (3) To complete KEMET part number, insert H = Standard solder coated or T = 100% Tin Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 10 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC % Rated Voltage Derating Guidelines 100% 95% 90% 85% 80% 75% 70% 65% 60% 55% 50% -55 Maximum Transient Voltage Recommended Application Voltage VR 10 V Recommended Application Voltage VR > 10 V 25 45 Temperature (C) 85 105 Recommended Application Voltage KOCAP's are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended guidelines. While the KOCAP can be operated at full rated voltage, most circuit designers seek a minimum level of assurance in long term reliability which should be demonstrated with data. A voltage derating can provide the desired level of demonstrated reliability based on industry accepted acceleration models. Since most applications do require long term reliability, KEMET recommends that designers consider a voltage derating, according the graphic above, for the maximum steady state voltage. Voltage Rating Maximum Recommended Steady State Voltage -55C to 105C 10 V VR 90% of VR VR > 10 80% of VR VR = Rated Voltage Reverse Voltage Solid electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25C 85C 125C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 11 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Table 2 - Land Dimensions/Courtyard Density Level A: Maximum (Most) Land Protrusion (mm) KEMET Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case L W S V1 V2 L W S V1 V2 L W S V1 V2 TSP2B 2.34 2.54 1.41 7.10 4.30 1.94 2.42 1.61 6.00 3.80 1.56 2.32 1.77 5.14 3.54 TSP2C 2.98 2.74 2.53 9.50 4.50 2.58 2.62 2.73 8.40 4.00 2.20 2.52 2.89 7.54 3.74 TSP2D 3.48 3.24 3.03 11.00 5.60 3.08 3.12 3.23 9.90 5.10 2.70 3.02 3.39 9.04 4.84 TSP2X 3.48 3.24 3.03 11.00 5.60 3.08 3.12 3.23 9.90 5.10 2.70 3.02 3.39 9.04 4.84 TSP3B 2.34 2.54 1.41 7.10 4.30 1.94 2.42 1.61 6.00 3.80 1.56 2.32 1.77 5.14 3.54 TSP3D 3.48 3.24 3.03 11.00 5.60 3.08 3.12 3.23 9.90 5.10 2.70 3.02 3.39 9.04 4.84 TSP3X 3.48 3.24 3.03 11.00 5.60 3.08 3.12 3.23 9.90 5.10 2.70 3.02 3.39 9.04 4.84 TSP4B 2.34 5.54 1.41 7.10 7.30 1.94 5.42 1.61 6.00 6.80 1.56 5.32 1.77 5.14 6.54 TSP4D 3.48 7.64 3.03 11.00 10.10 3.08 7.52 3.23 9.90 9.60 2.70 7.42 3.39 9.04 9.34 TSP4X 3.48 7.64 3.03 11.00 10.10 3.08 7.52 3.23 9.90 9.60 2.70 7.42 3.39 9.04 9.34 TSP6B 2.34 5.54 1.41 7.10 7.30 1.94 5.42 1.61 6.00 6.80 1.56 5.32 1.77 5.14 6.54 TSP6D 3.48 7.64 3.03 11.00 10.10 3.08 7.52 3.23 9.90 9.60 2.70 7.42 3.39 9.04 9.34 TSP6X 3.48 7.64 3.03 11.00 10.10 3.08 7.52 3.23 9.90 9.60 2.70 7.42 3.39 9.04 9.34 Density Level A: For low-density Product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). 1 Height of these chips may create problems in wave soldering. V1 L L W W V2 S Grid Placement Courtyard (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 12 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Soldering Process Please note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60 - 120 seconds 60 - 120 seconds Ramp-up Rate (TL to TP) 3C/seconds maximum 3C/seconds maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 60 - 150 seconds Peak Temperature (TP) 220C 250C Time within 5C of Maximum 20 seconds maximum 30 seconds maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 6C/seconds maximum 6C/seconds maximum Time 25C to Peak 6 minutes maximum 8 minutes maximum Temperature Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. TP TL Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp Up Rate = 3C/second Maximum Ramp Down Rate = 6C/second tL Tsmax Tsmin 25 ts 25C to Peak Time Storage All KO-Cap Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts are classified as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J-STD-020 and packaged per IPC/JEDEC J-STD-033 MSL3 specifies a floor time of 168H at 30C maximum temperature and 60% relative humidity Unused capacitors should be sealed in a MBB with fresh desiccant. Calculated shelf life in sealed bag: - 12 months from bag seal date in a storage environment of <40C and humidity <90% RH - 24 months from bag seal date in a storage environment of <30C and humidity <70% RH If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 13 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Construction Detailed Cross Section Silver Paint (Fourth Layer) Tantalum Wire Polarity Stripe (+) Leadframe (- Cathode) BeCu Alloy 190 Molded Epoxy Case Polarity Bevel (+) Lead Termination (- Cathode) Polymer Carbon (Third Layer) (Second Layer) Weld (to attach wire) High Temperature Solder Silver Adhesive Molded Epoxy Case Lead Termination (+ Anode) Solder Coated Alloy 752 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Tantalum Wire High Temperature Solder Ta2O5 Dielectric (First Layer) Tantalum Leadframe (+ Anode) BeCu Alloy 190 T2029_TSP * 8/27/2018 14 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC Capacitor Marking T540 KEMET Multi-Anode Polymer Polarity Indicator (+) Date Code * 1st digit = Last number of Year 2 = 2012 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year Picofarad Code KEMET ID Rated Voltage Date Code* * 727 = 27th week of 2017 T541 KEMET Multi-Anode Polymer Polarity Indicator (+) Picofarad Code Date Code * 1st digit = Last number of Year 2 = 2012 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year KEMET ID Rated Voltage Date Code* * 727 = 27th week of 2017 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 15 KEMET Organic Capacitor (KO-CAP (R)) - Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 - 63 VDC KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as the installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2029_TSP * 8/27/2018 16