MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
8
8 - 148
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC567LC5
GaAs MMIC I/Q DOWNCONVERTER
7 - 9 GHz
v03.1208
General Description
FeaturesTypical Applications
The HMC567LC5 is a compact GaAs MCM I/Q
downconverter in a leadless RoHS compliant
SMT package. This device provides a small signal
conversion gain of 10 dB with a noise ξ˜‚ gure of 2.5 dB
and 35 dB of image rejection across the frequency
band. The HMC567LC5 utilizes an LNA followed by
an image reject mixer which is driven by an LO buffer
ampliξ˜‚ er. The image reject mixer eliminates the need
for a ξ˜‚ lter following the LNA, and removes thermal
noise at the image frequency. I and Q mixer outputs
are provided and an external 90Β° hybrid is needed to
select the required sideband. The HMC567LC5 is a
much smaller alternative to hybrid style image reject
mixer downconverter assemblies, and it eliminates the
need for wire bonding by allowing the use of surface
mount manufacturing techniques.
Electrical Speciξ˜‚ cations, TA = +25Β° C,
IF = 100 MHz, LO = 0 dBm, VddLO = 5.0 Vdc, VddRF = 3.0 Vdc*
Parameter Min. Typ. Max. Units
Frequency Range, RF 7 - 9 GHz
Frequency Range, LO 3.5 - 12.5 GHz
Frequency Range, IF DC - 3.5 GHz
Conversion Gain (As IRM) 7 10 dB
Noise Figure 2.5 dB
Image Rejection 23 35 dB
1 dB Compression (Input) -4 dBm
LO to RF Isolation 43 54 dB
LO to IF Isolation 20 32 dB
IP3 (Input) +1. 5 dBm
Amplitude Balance Β±0.75 dB
Phase Balance Β±3 Deg
Total Supply Current 160 195 mA
*Data taken as IRM with external IF Hybrid
Functional Diagram
The HMC567LC5 is ideal for:
β€’ Point-to-Point and Point-to-Multi-Point Radio
β€’ EW & ELINT
Conversion Gain: 10 dB
Image Rejection: 35 dB
LO to RF Isolation: 54 dB
Noise Figure: 2.5 dB
Input IP3: +1.5 dBm
RoHS Compliant 5x5 mm SMT Package
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
8
8 - 149
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Conversion Gain vs. Temperature
Input P1dB vs. Temperature
Conversion Gain vs. LO Drive
Image Rejection vs. Temperature
Return Loss
Input IP3 vs. LO Drive
Data Taken As IRM With External IF Hybrid
-10
-5
0
5
10
15
20
678910
+25C
+85C
-40C
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
HMC567LC5
v03.1208 GaAs MMIC I/Q DOWNCONVERTER
7 - 9 GHz
-10
-5
0
5
10
15
20
678910
-4dBm
-2dBm
0dBm
+2dBm
+4dBm
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-2
-1
0
1
2
3
4
5
6
678910
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
IP3 (dBm)
RF FREQUENCY (GHz)
-12
-10
-8
-6
-4
-2
0
678910
+25C
+85C
-40C
P1dB (dBm)
RF FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
35791113
LO
RF
RETURN LOSS (dB)
FREQUENCY (GHz)
10
15
20
25
30
35
40
45
50
678910
+25C
+85C
-40C
IMAGE REJECTION (dB)
RF FREQUENCY (GHz)
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
8
8 - 150
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Isolations IF Bandwidth*
Amplitude Balance vs. LO Drive Phase Balance vs. LO Drive
Quadrature Channel Data Taken Without IF Hybrid
* Conversion gain data taken with external IF hybrid, LO frequency ξ˜‚ xed at 7.0 GHz and RF varied
Noise Figure vs. LO Drive,
LO Frequency = 7.0 GHz
Noise Figure vs. LO Drive,
IF Frequency = 100 MHz
v03.1208
HMC567LC5
GaAs MMIC I/Q DOWNCONVERTER
7 - 9 GHz
0
1
2
3
4
5
6
678910
-4dBm
-2dBm
0dBm
+2dBm
+4dBm
NOISE FIGURE (dB)
RF FREQUENCY (GHz)
-20
-15
-10
-5
0
5
10
15
20
678910
LO = -4 dBm
LO = -2 dBm
LO = +0 dBm
LO = +2 dBm
LO = +4 dBm
PHASE BALANCE (degrees)
RF FREQUENCY (GHz)
0
2
4
6
8
0.5 1 1.5 2 2.5 3 3.5 4
-4dBm
-2dBm
0dBm
+2dBm
+4dBm
NOISE FIGURE (dB)
IF FREQUENCY (GHz)
-2
-1.5
-1
-0.5
0
0.5
1
1.5
2
678910
LO = -4 dBm
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
AMPLITUDE BALANCE (dB)
RF FREQUENCY (GHz)
-40
-30
-20
-10
0
10
20
30
40
0.5 1 1.5 2 2.5 3
RETURN LOSS
CONVERSION GAIN
RESPONSE (dB)
IF FREQUENCY (GHz)
-60
-50
-40
-30
-20
-10
0
10
678910
ISOLATION (dB)
RF FREQUENCY (GHz)
LO/IF2
LO/IF1
RF/IF1
RF/IF2
LO/RF
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
8
8 - 151
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
MxN Spurious Outputs
nLO
mRF01234
0xx15484260
1130294866
26353595984
37993835276
4 104 103 104 107 97
RF = 7.6 GHz @ -20 dBm
LO = 7.5 GHz @ +4 dBm
Data taken without IF hybrid
All values in dBc below IF power level.
Absolute Maximum Ratings
RF +5 dBm
LO Drive +20 dBm
VddRF / VddLO 4.0V / 5.5V
Channel Temperature 150Β°C
Continuous Pdiss (T=85Β°C)
(derate 9.56 mW/Β°C above 85Β°C) 508 mW
Thermal Resistance (RTH)
(channel to package bottom) 77 Β°C/W
Storage Temperature -65 to +150 Β°C
Operating Temperature -55 to +85 Β°C
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKLE
3. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
v03.1208
HMC567LC5
GaAs MMIC I/Q DOWNCONVERTER
7 - 9 GHz
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
8
8 - 152
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Pin Number Function Description Interface Schematic
1, 5, 7 - 9,
13 - 16, 22 - 27,
29 - 32
N/C No connection required. These pins may be connected
to RF/DC ground without affecting performance.
2, 4, 10, 12,
17, 19, 21 GND These pins and ground paddle must be connected to
RF/DC ground.
3RF This pin is AC coupled
and matched to 50 Ohms.
6VddLO Power supply for LO ampliξ˜‚ er.
100 mA typical, 120 mA maximum.
28 VddRF Power supply for RF LNA.
60 mA typical, 75 mA maximum.
18 IF2
This pin is DC coupled for applications not requir-
ing operation to DC. This port should be DC blocked
externally using a series capacitor whose value has
been chosen to pass the necessary frequency range.
For operation to DC, this pin must not sink / source more
than 3 mA of current or part non-function and possible
failure will result.
20 IF1
11 LO This pin is AC coupled
and matched to 50 Ohms.
Pin Descriptions
Typical Application
v03.1208
HMC567LC5
GaAs MMIC I/Q DOWNCONVERTER
7 - 9 GHz
Note: LSB and USB is determined by GND on Hybrid
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
8
8 - 153
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Evaluation PCB
The circuit board used in the ξ˜‚ nal application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
List of Materials for Evaluation PCB 111239 [1]
Item Description
C1, C2 Capacitor 0402, Pkg. 100pF
C4, C5 Capacitor 0402, Pkg. 1000pF
C7, C8 Capacitor, Case A, 2.2uF *(Polarity)
J1, J2 PCB Mount SMA RF Connector, SRI
J3, J4 PCB Mount SMA Connector, Johnson
J5 DC Pin, VD2 = VddRF
J6 DC Pin, VD3 = VddLO
VC1, VD1 N/C
U1 HMC567LC5
PCB [2] 111225 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
v03.1208
HMC567LC5
GaAs MMIC I/Q DOWNCONVERTER
7 - 9 GHz