CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output FEATURES * 0...4 "H2O to 0...150 psi gage or differential, 0...15 to 0...150 psi absolute * Precision temperature compensated * Calibrated offset and span * Voltage excitation * Excellent long term stability SERVICE Non-corrosive, non-ionic working fluids such as clean dry air, dry gases and the like. The media wetted materials are: port 1: - front side of silicon sensor chip - glass filled nylon - RTV - silgel (for devices of 5 psi and above) - ceramic (Al2O3) port 2: - silicon sensor chip - glass filled nylon - RTV - ceramic (Al2O3) EQUIVALENT CIRCUIT ELECTRICAL CONNECTION +Vs 3 -Vout +Vout 4 2 1 -Vs June 2008 / 613 Pin 1: -Vs Pin 2: +Vout Pin 3: +Vs Pin 4: -Vout 1/6 www.sensortechnics.com CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output SPECIFICATIONS Maximum ratings (for all devices) Supply voltage VS Environmental specifications (for all devices) 3 to 16 V Lead temperature (soldering 5 seconds) 315 C Common mode pressure 50 psig Temperature range Compensated Operating Storage Humidity limits (non-condensing) 0 to 70 C -25 to 85 C -40 to 125 C 0 to 95 %RH PRESSURE SENSOR CHARACTERISTICS VS = 12 V, TA = 25C, pressure applied to port P1 Full scale span3 Part no. Operating pressure Proof pressure1 Burst pressure2 Min. Typ. Max. CPCL04... 4 "H2O 3 p si 5 p si 23 mV 25 mV 27 mV CPCL10... 10 "H2O 3 p si 5 p si 19 mV 20 mV 21 mV CPC0.3... 0.3 psi 3 p si 5 p si 19 mV 20 mV 21 mV CPC01... 1 p si 3 p si 5 p si 17 mV 18 mV 19 mV CPC05... 5 p si 1 5 p si 2 5 p si 57 mV 60 mV 63 mV CPC15... 1 5 p si 4 5 p si 7 5 p si 85 mV 90 mV 95 mV CPC30... 3 0 p si 9 0 p si 1 5 0 p si 85 mV 90 mV 95 mV CPC60... 6 0 p si 1 8 0 p si 3 0 0 p si 85 mV 90 mV 95 mV CPC100... 1 0 0 p si 2 5 0 p si 4 0 0 p si 95 mV 100 mV 105 mV CPC150... 1 5 0 p si 2 5 0 p si 4 0 0 p si 85 mV 90 mV 95 mV 2/6 June 2008 / 613 www.sensortechnics.com CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output PERFORMANCE CHARACTERISTICS VS = 12 V, TA = 25C, pressure applied to port P1 Characteristics Zero pressure offset Min. Typ. Max. Unit -1.0 0 +1.0 mV 0.25 1.0 Combined non-linearity and hysteresis4 %FSS Temperature effects (0 to 70C)5 Span 2.0 Offset 1.0 Input resistance mV 5 k Output resistance Response time (10 to 90 %FSS) 3 CPCL... 500 CPC... 100 s Common mode voltage6 6 V Notes 1 Proof pressure is the maximum pressure which may be applied without causing durable shifts of the electrical parameters of the sensing element. 2 Burst pressure is the maximum pressure which may be applied without causing damage to the sensing element or leaks from the housing. 3 Full scale span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. The span is ratiometric to the supply voltage. 4 Non-linearity refers to the Best Straight Line fit measured for offset pressure, full-scale pressure and 1/2 full-scale pressure. 5 Shift is relative to 25C. The CPCL04... has a compensated temperature range from 0 to 50C. 6 This is the common-mode voltage of the output arms (pins 2 and 4) for VS = 12 V. June 2008 / 613 3/6 www.sensortechnics.com CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output OUTLINE DRAWING Package version G and A (no port) 9.9 (0.39) 8.9 (0.35) P1 7.6 (0.30) 0.6 (0.03) Vent hole (P2) (G version only) 4.1 (0.16) 5.8 7.4 (0.23) (0.29) 9.9 (0.39) 15.5 (0.61) 2.8 (0.11) 6.1 (0.24) 1.1 (0.04) DIA 0.8 (0.03) 1 2 3 4 2.5 (0.10) 0.5 (0.02) 0.3 (0.01) mass: approx. 2 g dimensions in mm (inches) Package version GF and AF 9.9 (0.39) 10.4 (0.41) 2.8 (0.11) 8.9 (0.35) P1 7.6 (0.30) 0.6 (0.03) Vent hole (P2) (GF version only) 4.1 (0.16) 5.8 7.4 (0.23) (0.29) 9.9 (0.39) 6.1 (0.24) DIA 3.8 (0.15) 15.5 (0.61) DIA 2.0 (0.08) 1.1 (0.04) DIA 4.8 (0.19) 1 2 3 4 mass: approx. 2 g 4/6 2.5 (0.10) 0.5 (0.02) 0.3 (0.01) dimensions in mm (inches) June 2008 / 613 www.sensortechnics.com CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output OUTLINE DRAWING Package version D 9.9 (0.39) 8.9 (0.35) 7.6 (0.30) 2.5 (0.10) 2.5 (0.10) P1 0.5 (0.02) Vent hole (P2) 4.1 (0.16) 5.8 (0.23) 9.9 (0.39) 7.4 (0.29) 6.1 (0.24) DIA 0.8 (0.03) 1.1 (0.04) 15.5 (0.61) 1 2 3 4 mass: approx. 2 g 0.3 (0.01) 0.5 (0.02) 2.5 (0.10) dimensions in mm (inches) Package version DF 19.8 (0.78) 9.9 (0.39) 10,4 (0.41) 8.9 (0.35) 2.8 (0.11) P1 7.6 (0.30) 0.6 (0.03) Vent (P2) 4.1 (0.16) 5.8 (0.23) 9.9 (0.39) 7.4 (0.29) 6.1 (0.24) DIA 3.8 (0.15) 15.5 (0.61) DIA 2.0 (0.08) 1.1 (0.04) DIA 4.8 (0.19) 1 2 3 4 mass: approx. 2 g June 2008 / 613 2.5 (0.10) 0.5 (0.02) 0.3 (0.01) dimensions in mm (inches) 5/6 www.sensortechnics.com CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output ORDERING INFORMATION Absolute devices Pressure range No port (A) Axial port (AF) Gage devices Differential devices No port (G) Axial port (GF) No port (D) Axial port (DF) 4 "H2O CPCL04GC CPCL04GFC C P C L04D C C P C L04D F C 10 "H2O ---7 CPCL10GFC ---7 C P C L10D F C 0.3 psi CPC0.3GC CPC0.3GFC ---7 ---7 1 p si ---7 CPC01GFC ---7 C P C 01D F C 5 p si CPC05GC CPC05GFC ---7 C P C 05D F C 1 5 p si C P C 15A C C P C 15A F C ---7 CPC15GFC ---7 C P C 15D F C 3 0 p si C P C 30A C C P C 30A F C ---7 ---7 ---7 ---7 6 0 p si ---7 C P C 60A F C ---7 ---7 ---7 C P C 60D F C 1 0 0 p si ---7 C P C 100A F C CPC100GC CPC100GFC ---7 ---7 1 5 0 p si ---7 ---7 ---7 CPC150GFC ---7 C P C 150D F C Note 7 THESE DEVICES ARE AVAILABLE ON SPECIAL REQUEST. MINIMUM ORDER QUANTITY APPLIES. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. 6/6 June 2008 / 613 www.sensortechnics.com