DETAIL A
SCALE =6X
.016±.002
04/22/04
A
B
C
D
7
8
A
B
C
D
12
3
4
5
6
7
8
ON DEMAND, ON COMPLETI ON OF ORDERS ASSEMBLY
C-7-1542008-5
DWG. NO.
32.5mm HEATSINK
OF TYCO. MUST BE RETURNED TO TYCO
IN WRITING BY AN AUTHORIZED OFFICIAL
SPECIFIED
TOLERANCES ARE:
UNLESS OTHERWISE
..XX
..XXXX
.
DATE
DRAWN BY:
ENGINEER:
E.TAO 04/21/04
TITLE:
SIZE:
1.25:1
REV:
A
SCALE: PART NO: 7-1542008-5
A
SHEET:
1 OF 1
PROJECTION
DIMENSONS ARE IN:
INCHES
FILENAME PROJECT SYSTEM TNIRD ANGLE
.XXX
ANGLES
ANY PURPOSES EXCEPT AS AUTHORIZED
TO OTHERS. REPRODUCED OR USED FOR
ELECTRONICS. NOT TO BE DISCL OSED
CONFIDEN TIAL PROPERTY OF TYCO
OR OTHER PURPOSES FOR WHICH LENT.
DO NOT SCALE
DATE MATERIAL:
FINISH:
SEE NOTE
SEE NOTE
B.PETROCELLI
1. MATERIAL:
HEAT SINK: ALUM. (BLACK ANODIZE)
CLIP: BLACK PEI (UL94-VO)
2. BEFORE THE HEATSINK APPLICATION, THE USER SHOULD
IDENTIFY THE SPECIFICATION OF MAXIMUM LOAD ON
THE BGA PACKAGE.
HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE.
BARE DIE PACKAGE:
2.0 POUND-FORCE INCH TORQUE = 8.1 POUND-FORCE
(0.23 NEWTON METER TORQUE = 36.03 NEWTON)
2.5 POUND-FORCE INCH TORQUE = 10.1 POUND-FORCE
(0.28 NEWTON METER TORQUE = 44.93 NEWTON)
FULL SIZE LID PACKAGE:
2.0 POUND-FORCE INCH TORQUE = 6.9 POUND-FORCE
(0.23 NEWTON METER TORQUE = 30.69 NEWTON)
2.5 POUND-FORCE INCH TORQUE = 8.7 POUND-FORCE
(0.28 NEWTON METER TORQUE = 38.70 NEWTON)
3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1
4. RoHS COMPLIANT AND CERTIFIED.
SECTION B-B
1-27 UNS - 2A
THREAD 1.299
.573
2
1
3
2.000 DIA.
4-LEG CL IP SIZE: 32.5m m
4-FIN HS: 0.573 HT.
A
±.020
LIP LEG
.443 MAX
1.286
±.005.237
2.000
1.379
.095
.107±.005
B
B
ITEM DESCRIPTION QTY
1 MOUNTING CLIP 1
2HEAT SINK1
3 INTERFACE 1
CU STOMER D RAWING
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
REVISION(S)
LTR DESCRIPTION INIT APP'D
O E CN: 0S 60-0104-04 E . T 04/ 21/ 04 B . P 04/ 22/ 04
A ECR-06-025652 E.T 11/2/06 V.K 11/2/06
