Proximity Sensors PL Pyroelectric Infrared Sensors Overview Applications KEMET's Pyroelectric Infrared Sensors use the pyroelectric effect of ceramic by absorbing infrared rays emitted from the human body. This detects the natural infrared signature produced by humans. Also, it can detect infrared rays without using lenses. Typical applications include human presence detection sensing for energy saving functions in: * Contact less switching * Office automation equipment * Home appliances * Lighting * Display products * Air-conditioners * TV * PC monitors * Rice cookers * Smart toilets Due to the absence of a lens, KEMET's Pyro Sensor is low profile, as it does not protrude, which makes it ideal for gathering visual requirements. With KEMET's proprietary piezoelectric ceramic material and element structure of the Pyroelectric Infrared Sensor, humans can be detected through glass or resin. This allows more freedom in the design of the outer appearance of the end product. Benefits * * * * * * * Reflow capable SMD configuration Lens not required Wide view angle up to 60 degrees Detection possible through glass or resin Low power consumption, down in the A range Excellent radio wave performance in high-frequency band Compact and low profile (5.0 x 4.8 x 1.7 mm) Front Back Ordering Information PL- N 823- 01 Series Lens Type Sensor Type Serial Number PL N = No lens 823 01 One world. One KEMET (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com SE0206_PL * 2/12/2019 1 Proximity Sensors - PL Pyroelectric Infrared Sensors Performance Characteristics Item Performance Characteristics Operating temperature -40C to +70C Storage temperature -40C to +85C Measuring Method Heat source Horizontal angle () Sensor Detected Distance (m) (m) -22.5 3 0 22.5 2.5 -45 45 2 5C 10C 20C 25C 1.5 -67.5 67.5 1 0.5 0 -90 90 Sensor -113 113 T (C)-135= Difference between room temperature and heat source temperature 135 -158 158 -180 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com SE0206_PL * 2/12/2019 2 Proximity Sensors - PL Pyroelectric Infrared Sensors Performance Characteristics (cont.) Detecting Performance with Different Materials 1.8 Threshold Output Voltage [VO-p] 1.6 Glass 1.4 Glass (Gorilla(R)) 1.2 ASB 1.0 Acrylic 0.8 Polycarbonate Can detect 0.6 0.4 0.2 0.0 Cannot detect 5 10 15 20 25 30 35 Detecting Distance [cm] Measuring conditions: Transfer velocity - 1 m/s Heat source size - 170x70 mm (relative to hand) Temperature difference - 10C Each material thickness - 1 mm (clear color) Dimensions in mm Dimensions in mm Land Pattern in mm 5 1.7 (3) (1) (2) 4.2 4.8 1.75 (4) 4.7 4.4 1.2 3.3 (1) 1 pin mark GND (2) Vout (Source) Pin Number Pin Name 1 GND 2 Vout (Source) 3 Vin (Drain) 4 GND 1.75 4.5 GND (4) (3) 1.2 Vin (Drain) 3.3 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com SE0206_PL * 2/12/2019 3 Proximity Sensors - PL Pyroelectric Infrared Sensors Environmental Compliance All KEMET Pyroelectric Infrared Sensors are RoHS and REACH Compliant. Article 33(1) of the REACH Regulation states that manufacturers and importers of articles (products) are required to notify their customers of the presence of any Substances of Very High Concern (SVHC) in their products exceeding 0.1% by weight and provide instructions on safe use of the product. KEMET Corporation reports regarding the Article 33(1) of REACH Regulation as follows: 1. Applicable Product: Pyroelectric Infrared Sensors (PL series) 2. Report for the content of REACH SVHC list: The product(s) above contains a substance by more than 0.1wt% per product weight that was published in the 8th update of the REACH SVHC substances (December 19, 2012). 3. Regarding the safety of the pyroelectric infrared sensors (Piezoceramic products): The Piezoceramic that is used in this product becomes ceramic by sintering powder containing PZT as the main ingredient. It is chemically stable, with minimum risks toward the human body or environment within the intended use of the product. Please note that risks could occur in the case of inhalation or accidental oral uptake of powder ceramics. 4. Technical product information on the multilayer piezoelectric actuators (Piezoceramic products): The manufacturing technique of the "piezoceramic products" whose main ingredient is Lead Titanium Zirconium Oxide (PZT) has been established, and there is no alternative material that can exhibit superior performance than PZT at this moment. Please note that the piezoceramic is listed as an exempt on RoHS (2011/65/EU) AnnexIII (7c.1). 5. The responsibility of piezoceramic manufacturers: Piezoceramic manufacturers report information regarding PZT containment in their products to the customers to obey the article 33 of the REACH regulation (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com SE0206_PL * 2/12/2019 4 Proximity Sensors - PL Pyroelectric Infrared Sensors Table 1 - Ratings & Part Number Reference Part Number Supply Voltage (VDC) Minimum Output Voltage1 (mVp-p) PL-N823-01 2.0 ~ 15.0 550 Source Voltage2 (V) 0.3 ~ 0.9 Maximum Noise3 (mVp-p) Maximum Warm up Time4 (seconds) Maximum Field of View () MSL Reflow Temp 240C Weight (g) 140 30 Horizontal: 60 Vertical : 60 3 0.1 Difference of temperature with ambient temperature and heat source: 70C, aperture diameter: 10, 1 Hz and AMP: 26 dB Vd = 5 V and Rs = 47 k 3 AMP = 72 dB and Rs = 47 k 4 The warm up time is defined by the time needed for the source voltage to reach a rated value after the sensor's power supply has been turned on. 1 2 Applications Non-contact Switch 10 ~ 20 cm Chassis surface (resin or glass) PCB Sensor Detecting distance will vary by the chassis material used. Common Application Polyethylene 1~2m Sensor Chassis surface PCB Detecting distance increased to a few meters by using a polyethylene plate. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com SE0206_PL * 2/12/2019 5 Proximity Sensors - PL Pyroelectric Infrared Sensors Part Schematic Drain D G S Source GND GND Tape & Reel Packaging Information Series Packaging Type Pieces per Reel PL Tape & Reel 2,000 Taping Specifications Dimensions of indented square hole plastic tape 20.1 80.1 40.1 A 4 5.30.1 3 120.3 1 0.30.1 5.50.1 B 2 2.10.1 1.750.1 O1.50.1 0 A' R0.3 B' O1.50.1 0 5 5.50.1 R0.3 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com SE0206_PL * 2/12/2019 6 Proximity Sensors - PL Pyroelectric Infrared Sensors Tape & Reel Packaging Information cont. Reel Specifications Label Cover tape Carrier tape Feed hole Handling Precautions Pyroelectric Infrared Sensors should be kept away from indirect and direct sunlight, the headlights of cars, wind, and exposure to strong vibration and strong shock. Do not use in water, alcohol ETA, corrosive gas or undersea breeze. Do not drop or apply any mechanical stress. Pyroelectric Infrared Sensors should be stored in normal working environments. Solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long-term storage. KEMET recommends that maximum storage temperature not exceed 25C and maximum storage humidity not exceed 50% relative humidity. Atmospheres should be free of chlorine and sulfur-bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability sensors stock should be used promptly, preferably within six months of receipt. Export Control For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. For customers outside Japan Sensors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com SE0206_PL * 2/12/2019 7 Proximity Sensors - PL Pyroelectric Infrared Sensors KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com SE0206_PL * 2/12/2019 8