Overview Bussmann(R) for Non-Fusible Disconnect Switches CDNF16 CDNF25 Catalog number CDNF32 3 pole General purpose amp rating A CDNF30 CDNF60 CDNF100 Fusible CDNF16 - CDNF160 CDNF160 CDNF16 CDNF25 CDNF32 CDNF45 CDNF63 CDNF30 CDNF60 CDNF100 CDNF160 16 25 40 60 80 30 60 100 125 N/A UL508 UL508 N/A UL508 UL508 N/A UL508 UL508 N/A UL508 UL508 N/A UL508 UL508 N/A UL98 UL98 N/A UL98 UL98 N/A UL98 UL98 UL98 UL98 UL98 Approvals1 2 pole 3 pole 4 pole Max operating voltage V 600 600 600 600 600 600 600 600 600 Max horsepower rating Three phase 200 - 208V 240V 480V 600V HP HP HP HP 3 5 10 10 7.5 7.5 15 20 10 10 20 25 15 15 30 20 20 20 40 40 10 10 20 30 20 20 40 40 25 25 50 40 -- 30 60 75 Single phase 120V 240V HP HP 1/2 1.5 3/4 2 1 3 2 5 2 5 2 5 3 7.5 5 15 7.5 20 Rated insulation and operational V voltage. AC20 and DC203 750 750 750 750 750 750 750 750 750 Rated thermal current, Ith AC 20/DC 20 open AC 20/DC 20 enclosed A A 25 25 32 32 40 40 63 63 80 80 40 40 63 63 115 115 200 160 A A 16 16 25 25 32 32 63 63 80 80 40 40 63 63 100 100 160 160 Rated operational power AC23 400/415V kW 690V kW 7.5 7.5 9 9 11 11 22 15 37 18.5 15 15 18.5 15 37 37 75 75 Non-Fused Technical ratings UL,CSA2 AC 21A 500V 690V Enclosed Fused Technical ratings IEC2 Weight 4 3 pole lb 0.24 0.24 0.24 0.59 0.59 0.79 0.79 0.79 2.42 Dimension 3 pole H in W in D in 2.68 1.38 2.20 2.68 1.38 2.20 2.68 1.38 2.20 3.60 2.07 2.85 3.60 2.07 2.85 3.94 2.76 2.95 3.94 2.76 2.95 3.94 2.76 2.95 5.00 4.96 2.93 Terminal lug kit Integral Integral Integral Integral Integral Integral Integral Integral integral Terminal shroud Auxiliary contact * * * * * * * * * * * * * * * * * * Handle UL/NEMA type Type 1, 3R, 12 Type 1, 3R, 4, 4X, 12 * * * * * * * * * * * * * * * * * * Handle type Selector Pistol * * * * * * * * * * -- -- -- -- Conversion kits 6 pole Transfer Bypass Mechanical interlock * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -- * * * * Electrical interlock -- -- -- -- -- -- -- -- -- Enclosed Non-Fused Physical characteristics Accessories * = Available -- = Not available 1 2 3 4 * * * * UL listed, CSA approved, IEC rated, CE marked UL listed switches are also CSA approved. For complete technical information please see page 58 & 59. 1000V, IEC 408. Switch only 29 Overview Bussmann(R) for Non-Fusible Disconnect Switches BDNF200A - BDNF3150 Fusible BDNF175A BDNF200A Catalog number 3 pole General purpose amp rating A BDNF400A BDNF600A BDNF800A BDNF1200 BDNF1600 BDNF2000 BDNF3150 BDNF175A BDNF200A BDNF400 BDNF600A BDNF800A BDNF1200 BDNF1600 BDNF2000 BDNF3150 175 200 400 600 800 1200 1600 2000 3150 UL508 & IEC UL508 & IEC IEC UL98 & IEC UL98 & IEC IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC IEC UL98 & IEC UL98 & IEC IEC UL98 & IEC UL98 & IEC IEC UL98 & IEC UL98 & IEC IEC IEC IEC IEC Approvals1 2 pole 3 pole 4 pole Technical ratings UL,CSA2 Non-Fused Max operating voltage V 600 600 600 600 600 600 600 600 600 Max horsepower rating Three phase 200 - 208V 240V 480V 600V HP HP HP HP 30 40 75 100 60 75 150 200 100 125 250 350 150 200 400 500 200 250 500 600 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Single phase 120V 240V HP HP -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Rated insulation and operational V voltage. AC20 and DC203 1000 1000 1000 1000 1000 1000 1000 1000 1000 Rated thermal current, Ith AC 20/DC 20 open AC 20/DC 20 enclosed A A 200 200 315 270 630 630 800 720 1250 1250 1600 1600 2500 2300 2500 2300 3150 2600 A A 200 200 250 250 630 630 800 800 1250 1250 1600 1600 2500 2500 2500 2500 3150 3150 Rated operational power AC23 400/415V kW 690V kW 90 170 132 200 315 355 355 355 400 -- 400 -- 400 -- 400 -- 400 -- Technical ratings IEC2 Enclosed Fused AC 21A 500V 690V Physical characteristics Enclosed Non-Fused Weight 4 3 pole lb 6.61 6.61 13.66 13.66 35.9 38.55 127.7 127.7 127.7 Dimension 3 pole H in W in D in 8.35 7.83 4.55 8.35 8.62 4.55 11.81 10.24 5.12 11.77 11.93 5.12 19.09 14.29 4.92 19.09 14.29 4.92 25.04 18.43 10.67 25.04 18.43 10.67 25.04 18.43 10.67 BDTL25 BDTL25 BDTL26 BDTL27 BDTL30 BDTL28 BDTL28 BDTL28/2 BDTL28/2 -- -- -- * * * Accessories Terminal lug kit Auxiliary contact * * Handle UL/NEMA type Type 1, 3R, 12 Type 1, 3R, 4, 4X, 12 * * * * * * * * * * * * * * * * * * -- -- -- -- -- -- -- -- -- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -- -- -- -- -- -- -- -- -- Terminal shroud Handle type Selector Pistol Conversion kits 6 pole Transfer Bypass Mechanical interlock Electrical interlock * * * * S = Standard feature * = Available -- = Not available 1 UL listed switches are also CSA approved. 2 For complete technical information please see page 58 & 59. 3 1000V, IEC 408. 4 Switch only 30 * * * * * * * * * UL listed, CSA approved, IEC rated, CE marked * * * * * * * * * * * * 16A - 100A Bussmann(R) for Non-Fusible Disconnect Switches For a complete assembly, please select one of each: 1 switch 1 handle 1 shaft CDNF63 + CDS85S + Fusible Base & DIN Rail Mounted CDH3S 16 - 100 Amp switches, 600V, 3 pole1 CDNF16 CDNF25 CDNF32 IEC AC21 amp rating Maximum horsepower rating Single phase Three phase 120V 240V 200V 240V 480V Terminal lugs 600V Wire size Wire type Catalog number 16 16 1/2 1.5 3 5 10 10 #18 - 8 Cu CDNF16 25 25 3/4 2 7.5 7.5 15 20 #18 - 8 Cu CDNF25 40 40 1 3 10 10 20 25 #18 - 8 Cu CDNF32 60 63 2 5 15 15 30 20 #14 - 4 Cu CDNF45 80 80 2 5 20 20 40 40 #14 - 1 Cu CDNF63 30 40 2 5 10 10 20 30 #14 - 4 Cu CDNF30 60 63 3 7.5 20 20 40 40 #14 - 4 Cu CDNF60 100 115 5 15 25 25 50 40 #8 - 1/0 Cu CDNF100 Selector handles -- for use with shafts NEMA type IEC type .20 x .20" ( Color Non-Fused UL general purpose amp rating 5x5mm) Weight (lbs) Catalog number Defeatable Padlockable -- -- 0.09 CDH1S2 CDH1S IP54 Black 1 IP54 Red/Yel -- -- 0.09 CDH2S2 1 IP54 Black -- Yes 0.12 CDH15S2 1 IP54 Red/Yel -- Yes 0.12 CDH16S2 1,3R,12 IP65 Black -- Yes 0.16 CDH3S 1,3R,12 IP65 Red/Yel -- Yes 0.16 CDH4S 1,3R,12 IP65 Black Yes Yes 0.16 CDH5S 1,3R,12 IP65 Red/Yel Yes Yes 0.16 CDH6S .20 x .20" ( 5x5mm) Shafts -- for use with CDH selector handles Enclosed Non-Fused O OFF I ON 1 Enclosed Fused All marked both O/I & Off/On CDNF30 CDNF60 CDNF100 Mounting depth3 in inches CDH15S CDH6S CDS_S Shaft length inches/mm CDNF16 CDNF25 CDNF32 CDNF45 CDNF63 CDNF30 CDNF60 CDNF100 CDH1S, CDH2S CDH3S, CDH4S CDH1S, CDH2S CDH3S, CDH4S CDH3S, CDH4S CDH15S, CDH16S CDH5S, CDH6S CDH15S, CDH16S CDH5S, CDH6S CDH5S, CDH6S Weight Catalog (lbs) number 3.3/85 4.2 - 5.0 3.6 - 4.3 4.9 - 5.6 4.4 - 5.0 3.9 - 4.9 0.04 CDS85S 4.1/105 5.0 - 5.8 4.4 - 5.1 5.7 - 6.4 5.1 - 5.8 4.7 - 5.7 0.04 CDS105S 4.7/120 5.6 - 6.4 5.0 - 5.8 6.3 - 7.0 5.7 - 6.4 5.3 - 6.3 0.05 CDS120S 5.1/130 6.0 - 6.7 5.4 - 6.1 6.7 - 7.4 6.1 - 6.8 5.6 - 6.7 0.05 CDS130S 7.1/180 7.1 - 8.7 7.4 - 8.1 8.6 - 9.4 8.1 - 8.7 7.6 - 8.6 0.08 CDS180S 9.8/250 10.7 - 11.5 10.1 - 10.8 11.4 - 12.1 10.9 - 11.5 10.4 - 11.4 0.10 CDS250S 13/330 13.8 - 14.6 13.3 - 14.0 14.6 - 15.3 14.0 - 14.7 13.5 - 14.5 0.14 CDS330S 1 A snap on fourth pole may be added 2 Not suitable for use with CDNF30, 60, 100. 3 Mounting depth is the distance from the outside of door to the disconnect switch mounting plate. Shaft can be cut to desired length. 31 Handles & Shafts Bussmann(R) for 16A - 100A Non-Fusible Disconnect Switches Base & DIN Rail Mounted Pistol handles -- for use with shafts BDH104, 6 Fusible BDH105 NEMA type IEC type 1,3R,12 1,3R,12 .20 x .20" ( 5 x 5 mm) Color Marking Length inches/mm Defeatable Padlockable Weight (lbs.) Catalog number IP65 Black O/I & Off/On 1.8/45 Yes Yes 0.28 BDH104 IP65 Red/Yel O/I & Off/On 1.8/45 Yes Yes 0.28 BDH105 1,3R,12 IP65 Black O/I & Off/On 2.6/65 Yes Yes 0.29 BDH106 1,3R,12 IP65 Red/Yel O/I & Off/On 2.6/65 Yes Yes 0.29 BDH107 1,3R,12,4,4X IP66 Black O/I & Off/On 2.6/65 Yes Yes 0.29 CDHXB65 1,3R,12,4,4X IP66 Red/Yel O/I & Off/On 2.6/65 Yes Yes 0.29 CDHXY65 Shafts -- for use with pistol handles .20 x .20" ( 5 x 5 mm) Mounting depth1 in inches Shaft length (inches/mm) CDS_P Non-Fused CDS_T CDNF16 CDNF25 CDNF32 CDNF45 CDNF63 CDNF30 CDNF60 CDNF100 Weight (lbs.) Catalog number 5.9/150 6.2 - 6.7 6.9 - 7.4 6.4 - 7.4 0.07 CDS48P 6.7/170 7.0 - 7.5 7.7 - 8.1 7.2 - 8.1 0.08 CDS67P 10.4/265 10.7 - 11.3 11.4 - 11.9 10.9 - 11.9 0.12 CDS49P 15.8/400 16.0 - 16.6 16.8 - 17.2 16.2 - 17.2 0.18 CDS50P 19.7/500 20.0 - 20.5 20.7 - 21.1 20.1 - 21.1 0.23 CDS99P Twisted shafts -- Rotates handle 45 .20 x .20" ( 5 x 5 mm) Mounting depth1 in inches Enclosed Fused OPMRH Shaft length (inches/mm) CDNF16 CDNF25 CDNF32 CDNF45 CDNF63 CDNF30 CDNF60 CDNF100 Weight (lbs.) Catalog number 5.9/150 6.7/170 6.2 - 6.7 6.9 - 7.4 6.4 - 7.4 0.07 CDS48T 7.0 - 7.5 7.7 - 8.1 7.2 - 8.1 0.08 CDS67T 10.4/265 10.7 - 11.3 11.4 - 11.9 10.9 - 11.9 0.12 CDS49T 15.8/400 16.0 - 16.6 16.8 - 17.2 16.2 - 17.2 0.18 CDS50T CDBY68306 Replacement knob -- mounts directly to switch; no shaft necessary Enclosed Non-Fused NEMA Type CDBY68419/1 Color For use on: Length (inches) Padlockable Catalog number 1 Red CDNF16, 25, 32 1.0 -- 1 Red CDNF30, 45, 60, 63,100 1.4 -- OPMRH 1 Red CDNF30, 45, 60, 63,100 1.6 Yes2 Metal collar CDNF16 - CDNF100 -- -- CDMC1 Set screw CDNF16, 25, 30, 32, 45, 60, 63, 100 -- -- CDSWM5X8 CDBY683063 CDBY68419/13 CDMC1 1 Mounting depth is the distance from the outside of door to the disconnect switch mounting plate. Shaft can be cut to desired length. 2 .1875" (3/16") diameter shackle required. 3 Set screw CDSWM5X8 needed with replacement knobs CDBY__. 32 Accessories Bussmann(R) for 16A - 100A Non-Fusible Disconnect Switches Base & DIN Rail Mounted (N)7 L4 OT16E3 (N)8 T4 I ON N N N PE N N N PE Fusible Base and DIN rail mounted switches O OFF Auxiliary contacts1 -- snap-on mounting CDAUX__ For use on: Weight (lbs.) AC thermal amp rating AC rated voltage Catalog number 1 N.O. mounts on right hand side of switch only CDNF16 - CDNF100 0.07 10 600 CDAUX10 1 N.C. mounts on left hand side of switch only CDNF16 - CDNF100 0.07 10 600 CDAUX01 1 N.O. + 1 N.C. mounts on left or right hand side of switch CDNF16 - CDNF100 0.07 10 600 CDAUX11 AC thermal amp rating AC rated voltage Catalog number Non-Fused Description Max. two contacts on each side of switch CDAUX11 Power poles CD_32P For use on: Weight (lbs.) Fourth pole2 CDNF16 - CDNF100 0.07 0.13 0.31 40 80 100 600 600 600 CDS32P CDS63P CDS125P Late-break/early-make2 CDNF16 - CDNF100 0.07 0.13 0.31 40 80 100 600 600 600 CDL32P CDL63P CDL125P AC thermal amp rating AC rated voltage Catalog number Enclosed Non-Fused Description Enclosed Fused * Only one power pole per switch * Mounts on left or right side of switch Terminal poles * Switch accepts one terminal pole per side * Mounts on left or right side of switch Description CD_63P CD_125P For use on: Weight (lbs.) Solid neutral2 CDNF16 - CDNF100 0.07 0.13 0.31 40 80 100 600 600 600 CDN32P CDN63P CDN125P Detachable neutral 2 CDNF16 - CDNF100 0.07 0.13 0.31 40 80 100 600 600 600 CDD32P CDD63P CDD125P Ground terminal2 CDNF16 - CDNF100 0.07 0.13 0.31 40 80 100 600 600 600 CDE32P CDE63P CDE125P 1 UL File # E83510 2 Switch accepts one power pole or one terminal pole per side. Only one power pole per switch. 33 Accessories Bussmann(R) for 16A - 100A Non-Fusible Disconnect Switches Base & DIN Rail Mounted Terminal shrouds* -- snap on mounting for line or load side CDTS__T3 CDTS__T1 Description For use on: Weight (lbs.) Catalog number 3 pole includes one shroud for line or load side CDNF16, CDNF25, CDNF32, CDNF45, CDNF63, CDNF30, CDNF60, CDNF100 0.02 0.02 0.02 CDTS32T3 CDTS63T3 CDTS125T3 4th pole includes one shroud for line or load side CD_32P CD_63P CD_125P 0.02 0.02 0.02 CDTS32T1 CDTS63T1 CDTS125T1 Fusible * All disconnects are IP20 touch safe as standard. Terminal shrouds provide an additional level of protection. Padlocking adapter Description CDSA1 CDSA2 Adapter for one padlock with a max. 0.137" shackle Padlock for DS-SA1 For use on: CDNF30, CDNF45 CDNF60, CDNF63 CDNF100 Adapter and padlock Non-Fused CDTL-ST Weight (lbs.) Catalog number 0.02 CDSA1 0.22 CDSA2 0.24 CDSA3 Labelling accessories Description For use on: 1 Pkg. of label carriers CDNF30, CDNF45 CDNF60, CDNF63 CDNF100 1 Pkg of blank description labels Package quantity Catalog number 100 pieces CDTL-ST 315 pieces CDT-E Legend plates for selector handles CDP__2 Enclosed Fused Blank plate I ON O OFF CDP__2EN1 Catalog number Description For use on: Black Yellow Black Yellow CDH15, 25, 75, 85, 115, 125 155, 165, 175, 185, 195, 205 CDH35, 45, 55, 65, 95, 105, 135, 145 CDPB1 CDPY1 CDPB2 CDPY2 CDH15, 25, 75, 85, 115, 125 155, 165, 175, 185, 195, 205 CDH35, 45, 55, 65, 95, 105, 135, 145 CDPB1EN1 CDPY1EN1 CDPB2EN1 CDPY2EN1 Plate marked with: MAIN SWITCH Black Yellow Black Yellow Enclosed Non-Fused Locking accessories CDETL-ZW16 Description For use on: Weight (lbs.) Catalog number Cam attachment for Kirk Key, Castell, Lowe & Fletcher and Ronis interlock. For adapting to the interlock system. The interlock is not included. 5, 6 & 8mm shafts 0.29 CDETL-ZW16 For use on: Weight (lbs.) Length inches/mm Catalog number DIN rail Description NDNA100 NDNA200 34 35mm DIN Rail CDNF16 - CDNF100 .38 39.4/1000 NDNA100 35mm Aluminum DIN Rail CDNF16 - CDNF100 .75 78.8/1000 NDNA200 Shaft support Description For use on: Weight (lbs.) Shaft support CDNF16 - CDNF100 0.30 Catalog number CDTL-ZX58 Accessories Bussmann(R) for 16A - 100A Non-Fusible Disconnect Switches Base & DIN Rail Mounted Conversion mechanisms * For use with Base and DIN rail mounted switches only * Switches are not included Description For use on: 6 or 8 pole CDNF16 - CDNF100 0.33 CDZW8 1.87 CDZW6 1.54 CDZW17 Fusible Bypass 6 or 8 pole -- CDZW8 N CDZW6 6 (8) pole mechanism allows two switches controlled by one handle to open or close simultaneously. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches * One handle1 * One 5mm shaft 2 CDZW17 O X SW. B O X X = Closed O = Open 2 Transfer -- CDZW6 Transfer mechanism manually transfers between two power sources using two switches and a center OFF position. A 3-position handle is included: (UL Type 1, 3R & 12) or (UL Type 1, 3R, 4, 4X, 12) Shafts included. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches POS. O POS. I SW. A SW. A SW. B SW. A SW. B SW. A LOAD LOAD LOAD I O II Bypass -- CDZW17 POS. I POS. O POS. II SW. B SW. A X O O SW. B O O X X = Closed O = Open 2 Bypass mechanism operates three switches: Two switches in series and one changeover switch to allow power bypass. A 3-position handle is included: (UL Type 1, 3R & 12) or (UL Type 1, 3R, 4, 4X, 12) Shafts included.Equipment required for a complete installation: * One conversion mechanism * Three disconnect switches POS. I POS. O POS. II SW. A O O SW. B O O X SW. C X O O X SW. A POS. I SW. B POS. I SW. A X O SW. B O X X = Closed O = Open Mechanical interlock -- CDZW24 Mechanical interlock mechanism prevents both switches from being in the ON position at the same time. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches * Two handles * Two shafts 1 X = Closed O = Open CDZW24 1 CDNF16 - CDNF32 can use a selector or pistol handle. All other sizes must use a pistol handle. 2 Non-Fused IO Enclosed Fused CDZW8 Catalog number = Three poles 35 Enclosed Non-Fused Transfer Weight (lbs.) 16A - 100A Bussmann(R) Non-Fusible Disconnect Switches Door Mounted For a complete assembly, please order one of each: 1 switch 1 handle Fusible CDNF45D CDH9S 16 - 100 Amp switches, 600V, 3 pole123 UL general purpose amp rating Non-Fused CDNF16 CDNF25 CDNF32 IEC AC21 amp rating Maximum horsepower rating Single phase Three phase 120V 240V 200V 240V 480V Terminal lugs 600V Wire size Wire type Catalog number 16 16 1/2 1.5 3 5 10 10 #18 - 8 Cu CDNF16D 25 25 3/4 2 7.5 7.5 15 20 #18 - 8 Cu CDNF25D 40 40 1 3 10 10 20 25 #18 - 8 Cu CDNF32D 604 63 2 5 15 15 30 20 #14 - 4 Cu CDNF45D 804 80 2 5 20 20 40 40 #14 - 1 Cu CDNF63D 304 40 2 5 10 10 20 30 #14 - 4 Cu CDNF30D 604 63 3 7.5 20 20 40 40 #14 - 4 Cu CDNF60D 1004 115 5 15 25 25 50 40 #8 - 1/0 Cu CDNF100D Selector handles NEMA/UL type CDH8S CDH12S Color Defeatable Padlockable Weight (lbs) Catalog number All marked both O/I & Off/On Snap-on mounting -- for use on CDNF16, 25, 32D I ON O OFF Enclosed Fused CDH17S CDH19S IEC type 1 IP54 Black -- -- 0.10 CDH7S 1 IP54 Red/Yel -- -- 0.10 CDH8S 1 IP54 Black -- Yes 0.13 CDH19S 1 IP54 Red/Yel -- Yes 0.13 CDH20S 1,3R,12 IP65 Black -- Yes 0.17 CDH9S 1,3R,12 IP65 Red/Yel -- Yes 0.17 CDH10S Screw mounting -- for use on CDNF16, 25, 32, 45 & 63D Enclosed Non-Fused 1 IP54 Black -- -- 0.11 CDH11S 1 IP54 Red/Yel -- -- 0.11 CDH12S 1 IP54 Black -- Yes 0.14 CDH17S 1 IP54 Red/Yel -- Yes 0.14 CDH18S 1,3R,12 IP65 Black -- Yes 0.18 CDH13S 1,3R,12 IP65 Red/Yel -- Yes 0.18 CDH14S Door mounted switches do not provide door interlock CDH9S CDH13S Pistol grip handle adapter Description Adapter piece for pistol grip handle CDH10S CDH14S 36 1 2 3 4 For use on: Weight (lbs) CDNF30, CDNF60, CDNF100 A snap on fourth pole may be added Door mounted switches do not require shafts. CDNF16, 25, 32, 45 & 63 door mounted switches will not accept pistol handles. CDNF45 & 63 door mounted switches can only use screw mounted handles. 0.18 Catalog number CDHZX6 Accessories Bussmann(R) for 16A - 100A Non-Fusible Disconnect Switches Door Mounted Fusible Door mounted switches Description For use on: 1 N.O. mounts on righthand side of switch CDAUX__ 1 N.C. mounts on lefthand side of switch CDNF16D - CDNF100D 1 N.O. + 1 N.C. mounts on left or right hand side of switch Weight (lbs) AC thermal amp rating AC rated voltage Catalog number 0.07 10 600 CDAUX10 0.07 10 600 CDAUX01 0.07 10 600 CDAUX11 AC thermal amp rating AC rated voltage Catalog number Non-Fused Auxiliary contacts1 -- snap-on mounting Max. two contacts on each side of switch Enclosed Fused Power poles CDAUX11 Description CD_32D For use on: Weight (lbs) Fourth pole2 CDNF16D, CDNF25D, CDNF32D CDNF45D, CDNF63D CDNF30D, CDNF60D, CNDF100D 0.07 0.13 0.20 40 80 100 600 600 CDS32D CDS63D CDS100D Late-break/early-make2 CDNF16D, CDNF25D, CDNF32D CDNF45D, CDNF63D CDNF30D, CDNF60D, CNDF100D 0.07 0.13 0.20 40 80 100 600 600 CDL32D CDL63D CDL100D Weight (lbs) AC thermal amp rating AC rated voltage Catalog number Enclosed Non-Fused * Only one power pole per switch * Mounts on left or right side of switch Terminal poles * Switch accepts one terminal pole per side * Mounts on left or right side of switch Description For use on: Solid neutral2 CDNF16D, CDNF25D, CDNF32D CDNF45D, CDNF63D CDNF30D, CDNF60D, CNDF100D 0.07 0.13 0.20 40 80 100 600 600 CDN32D CDN63D CDN100D Detachable neutral2 CDNF16D, CDNF25D, CDNF32D CDNF45D, CDNF63D CDNF30D, CDNF60D, CNDF100D 0.07 0.13 0.20 40 80 100 600 600 CDD32D CDD63D CDD100D Ground terminal2 CDNF16D, CDNF25D, CDNF32D CDNF45D, CDNF63D CDNF30D, CDNF60D, CNDF100D 0.07 0.13 0.20 40 80 100 600 600 CDE32D CDE63D CDE100D CD_63D 1 UL File # E83510 2 Switch accepts one power pole or one terminal pole per side. Only one power pole per switch. 37 Accessories Bussmann(R) for 16A - 100A Non-Fusible Disconnect Switches Door Mounted Terminal shrouds* -- snap-on mounting for line or load side Fusible CDTS_T3 CDTS_T1 Description For use on: Weight (lbs) Catalog number 3 pole includes one shroud for line or load side CDNF16D, 25D, 32D CDNF45D & 63D CDNF30D, 60D, 100D 0.02 0.02 0.02 CDTS32T3 CDTS63T3 CDTS100T3 4 pole includes one shroud for line or load side CD_32D CD_63D CD_100D 0.02 0.02 0.02 CDTS32T1 CDTS63T1 CDTS100T1 * All disconnects are IP20 touch safe as standard. Terminal shrouds provide an additional level of protection. Legend plates for selector handles Description Blank plate Black Yellow For use on: CDH15, 25, 75, 85, 115, 125 155, 165, 175, 185, 195, 205 CDH35, 45, 55, 65, 95 105, 135, 145 Non-Fused Black Yellow Plate marked with: MAIN SWITCH Black Yellow CDH15, 25, 75, 85, 115, 125 155, 165, 175, 185, 195, 205 Black Yellow CDH35, 45, 55, 65, 95 105, 135, 145 Catalog number CDPB1 CDPY1 CDPB2 CDPY2 CDPB1EN1 CDPY1EN1 CDPB2EN1 CDPY2EN1 CDP_ Locking clip (replacement part) Enclosed Fused I ON O OFF CPP_EN1 Enclosed Non-Fused CDBY68140 38 Description For use on: Door mounted switch handle locking clip CDNF16D CDNF25D CDNF32D Catalog number CDBY68140 125A Bussmann(R) Non-Fusible Disconnect Switches CDNF160 BDS210 BDH60 Fusible For a complete assembly, please select one of each: 1 switch 1 handle 1 shaft 125 Amp Base & DIN rail mounted switches1, 600V IEC AC21 amp rating Maximum horsepower rating 200V 208V 240V 480V 600V Wire size Wire type 2 pole 125 160 -- -- -- -- -- #8 - 1/0 Cu CDNF160-2 3 pole 125 160 30 30 30 60 75 #8 - 1/0 Cu CDNF160 Wire size Terminal lugs Three phase Catalog number Non-Fused UL general purpose amp rating 125 Amp Door mounted switch1, 600V, 3 pole IEC AC21 amp rating Maximum horsepower rating 200V 208V 240V 480V 600V 125 160 30 30 30 60 75 .24 x .24" ( Cu Catalog number CDNF160D 6 x 6 mm) NEMA type IEC type Color Length in/mm Marking Defeatable Padlockable Weight (lbs) 1, 3R, 12 1, 3R, 12 1, 3R, 12 1, 3R, 12 IP65 IP65 IP65 IP65 Black Red/Yel Black Red/Yel 2.6/65 2.6/65 3.1/80 3.1/80 O/I & Off/On O/I & Off/On O/I & Off/On O/I & Off/On Yes Yes Yes Yes Yes Yes Yes Yes 0.29 0.29 0.30 0.30 BDH58 BDH59 BDH60 BDH61 1, 3R, 4, 4X, 12 1, 3R, 4, 4X, 12 IP66 IP66 Black Red/Yel 3.1/80 3.1/80 O/I & Off/On O/I & Off/On Yes Yes Yes Yes 0.30 0.30 CDHXB86 CDHXY86 Shafts -- for use with pistol handles BDH61 #8 - 1/0 Wire type Shaft length inches/mm 5.2/130 5.9/150 8.3/210 11.4/290 14.2/360 16.9/430 .24 x .24" ( 6 x 6 mm) Mounting depth2 in inches 4.3 5.0 7.4 10.5 13.3 16.0 - - - - - - Catalog number Enclosed Fused Pistol handles -- for use with BDH60 Terminal lugs Three phase 6.0 6.7 9.1 12.2 15.0 17.8 Weight (lbs) Catalog number 0.08 0.09 0.13 0.18 0.23 0.27 BDS130 BDS150 BDS210 BDS290 BDS360 BDS430 Weight (lbs) Catalog number Enclosed Non-Fused CDNF160D UL general purpose amp rating BDS__ Twisted shafts -- Rotates handle 45 Shaft length inches/mm 5.2/130 8.3/210 11.4/290 14.2/360 .24 x .24" ( 6 x 6 mm) Mounting depth2 in inches 4.3 - 6.0 7.4 - 9.1 10.5 - 12.2 13.3 - 15.0 0.08 0.13 0.18 0.23 BDST4 BDST25 BDST29 BDST30 BDST__ 1 A snap on fourth pole may be added 2 Mounting depth is the distance from the outside of the door to the disconnect switch mounting plate. Shaft can be cut to desired length. 39 Accessories Bussmann(R) for 125A Non-Fusible Disconnect Switches Auxiliary contacts, top mounted * Accepts four contacts maximum, mounting base always required Description 1 N.O. 1 N.C. 1 N.O. gold plated1 1 N.C. gold plated1 Fusible CDAUXCA10 CDAUXCA01 Mounting base - required for CDAUX_ For use on: CDNF160 CDNF160 Weight (lbs) AC thermal amp rating AC rated voltage Catalog number 10 600 CDAUXCA10 10 600 CDAUXCA01 10 600 CDEA-10AU 10 600 -- -- CDEA-01AU CDAUXB160 Catalog number 0.07 0.07 CDAUX__ 0.06 Description For use on: Weight (lbs) AC thermal amp rating AC rated voltage 1 N.O. & 1 N.C. CDNF160 0.07 10 600 Mounting base, required for CDAUX16011 CDNF160 0.06 -- -- Auxiliary contacts, side mounted * Accepts four contacts maximum CDAUX16011 CDMB160 Max. two contacts on each side of switch. One mounting base required for each side of switch Numbering stickers2 CDAUXB160 Non-Fused For use on: Package qty. Catalog number 1 Pkg. of blank labels for OBEA-10, 1 N.O. CDNF160 10 CDEA-ZX10 1 Pkg. of blank labels for OBEA-01, 1 N.C. CDNF160 10 CDEA-ZX01 Description Power pole -- for use with base or door mounted switch * Only one power pole per switch * Mounts on left or right side of switch CDAUX16011 CDMB160 Description For use on: Weight (lbs) AC thermal amp rating AC rated voltage Catalog number Fourth pole CDNF160 0.66 125 600 CDS160P Enclosed Fused Terminal poles -- for use with base or door mounted switch * Switch accepts one terminal pole per side * Mounts on left or right side of switch CD_160P Description For use on: Weight (lbs) AC thermal amp rating AC rated voltage Catalog number Detachable neutral mounts on side of switch or DIN rail CDNF160 0.66 125 600 CDN160P Ground terminal CDNF160 0.66 125 600 CDE160P Locking accessories Description Enclosed Non-Fused Cam attachment for Kirk Key, Castell, Lowe & Fletcher and Ronis interlock. For adapting to the interlock system The interlock is not included. For use on: 5, 6 & 8mm shafts Weight (lbs) Catalog number 0.29 CDETL-ZW16 Weight (lbs) Catalog number CDNF160 0.33 CDZX5 Description For use on: Weight (lbs) Joins two shafts together for applications where extended length is required for 6mm shafts for 12mm shafts 0.26 0.26 Handle support bracket Description CDETL-ZW16 Allows pistol handle to be directly mounted to switch behind the door For use on: Shaft extension couplers BDZX167 BDZX95 40 Catalog number BDZX167 BDZX95 1 Type _AU for low energy applications. The contacts are gold-plated. AC & DC ratings -- Maximum: A600 & P600. Minimum: 12V, 1mA; 5V, 2mA 2 Required if several contact blocks are used in the same installation. Accessories Bussmann(R) for 125A Non-Fusible Disconnect Switches Conversion mechanisms * For use with Base and Din rail mounted switches only * Switches are not included Catalog number 6 or 8 pole 1.52 BDZW2 Transfer (1, 3R, 12) 2.20 BDZW1 2.20 BDZW1X 0.55 CDZW10 CDNF160 Transfer (4X) Mechanical interlock 6 or 8 pole -- BDZW2 BDZW1 CDZW10 CDZK19 (X = 6mm) X SW. B O X X = Closed O = Open Transfer -- BDZW1 Transfer mechanism manually transfers between two power sources using two switches and a center OFF position. A 3 position handle is included. (UL Type 1, 3R & 12) or (UL Type 1, 3R, 4, 4X, 12) Shafts included. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches POS. I O 1 SW. A SW. B SW. A SW. B SW. A SW. B LOAD LOAD LOAD I O II POS. I POS. O POS. II SW. A X O O SW. B O O X SW. A POS. I SW. B POS. I SW. A X O SW. B O X X = Closed O = Open Mechanical interlock -- CDZW10 Mechanical interlock mechanism prevents both switches from being in the ON position at the same time. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches * Two handles * Two shafts 1 X = Closed O = Open Shaft adapter Description Adapts one end of a 5 or 6mm shaft to 12mm Use with shaft extension coupler For use on: 5 & 6mm shafts Weight (lbs) Catalog number 0.20 CDZK19 Weight (lbs) Catalog number Power pole interlock (replacement part) Description CDBY68005 Interlocks a power pole with an adjacent power pole For use on: CDNF160 0.05 CDBY68005 Replacement collar (optional replacement for knob) Description CDMC2 1 For use on: Weight (lbs) Catalog number Red knob (like original) for locking shaft in place ** re-use original set screw ** CDNF160 0.05 CXBY68100 Replaces original red knob for locking shaft in place ** re-use original set screw ** CDNF160 0.05 CDMC2 Non-Fused N POS. O SW. A Enclosed Non-Fused IO x-1 x 12 1 6 (8) pole mechanism allows two switches controlled by one handle, to open or close simultaneously. Shafts included. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches * One handle Enclosed Fused BDZW2 Weight (lbs.) For use on: Fusible Description = Three poles 41 Accessories 175A - 200A Bussmann(R) for Non-Fusible Disconnect Switches Fusible For a complete assembly, please select one of each: 1 switch 1 handle 1 shaft 1 terminal lug kit BDNF200A + BDS240 + BDH110 + BDTL25 175 - 200 Amp switches, 600V UL general purpose amp rating 2 pole 3 pole Non-Fused BDNF175A 4 pole Maximum horsepower rating IEC AC21 Amp rating 200V 208V 240V 480V 600V 175 200 250 250 -- -- -- -- -- -- -- -- -- -- BDNF175A2 BDNF200A2 175 200 250 250 30 60 30 60 40 75 75 150 100 200 BDNF175A BDNF200A 175 200 250 250 30 60 30 60 40 75 75 150 100 200 BDNF175A4 BDNF200A4 Three phase Pistol handles -- for use with shafts BDH108 Enclosed Fused NEMA type IEC type 1,3R,12 1,3R,12 1,3R,12 1,3R,12 1,3R,4,4X,12 1,3R,4,4X,12 Catalog number .31 x .31" ( 8 x 8mm) Color Length mm Marking Defeatable Padlockable Weight (lbs) Catalog number IP65 IP65 IP65 IP65 Black Red/Yellow Black Red/Yellow 2.6/65 2.6/65 3.1/80 3.1/80 O/I & Off/On O/I & Off/On O/I & Off/On O/I & Off/On Yes Yes Yes Yes Yes Yes Yes Yes 0.29 0.29 0.30 0.30 BDH108 BDH109 BDH110 BDH111 IP66 IP66 Black Red/Yellow 3.1/80 3.1/80 O/I & Off/On O/I & Off/On Yes Yes Yes Yes 0.30 0.30 CDHXB88 CDHXY88 BDH109 Shafts -- for use with pistol handles Enclosed Non-Fused Shaft length inches/mm BDS__ 5.5/140 9.5/240 13.4/340 19.5/500 Twisted shafts -- Rotates handle 45 Shaft length inches/mm 13.4/340 CDS340T 42 .31 x .31" ( 8 x 8mm) Mounting depth1 in inches BDNF175A - BDNF200A Weight (lbs) Catalog number 0.15 0.26 0.36 0.54 BDS140 BDS240 BDS340 BDS500 Mounting depth1 in inches BDNF175A - BDNF200A Weight (lbs) Catalog number 12.6 - 16.6 0.36 CDS340T 4.7 8.7 12.6 18.9 - - - - 8.7 12.6 16.6 22.9 .31 x .31" ( 8 x 8mm) 1 Mounting depth is the distance from the outside of the door to the disconnect switch mounting plate. Shaft can be cut to desired length. 2 Availability to be announced. Accessories Bussmann(R) for 175A - 200A Non-Fusible Disconnect Switches Terminal lug kits Wire size For use on: BDTL25 BDNF175A & BDNF200A Kit weight (lbs.) Wire type Terminal lugs per kit Catalog number #6 - 300 kcmil 0.93 Cu/Al 6 BDTL25 #6 - 300 kcmil 0.47 Cu/Al 3 BDTL253P *(6) #14 - 6 0.55 Cu/Al 3 BDTL175 Fusible *A load side distribution lug eliminates the need to purchase, install and wire a separate distribution block. BDTL175 Weight (lbs) AC thermal amp rating AC rated voltage Catalog number 1 N.O. + 1 N.C. 0.09 10 600 BDAUX12 2 N.O. + 2 N.C. 0.18 10 600 BDAUX13 0.35 10 600 BDAUX16 Description* For use on: 4 N.O. + 4 N.C. BDNF175A 2 N.O. BDNF200A 0.09 10 600 BDAUX14 4 N.O. 0.18 10 600 BDAUX15 8 N.O. 0.35 10 600 BDAUX17 Non-Fused Auxiliary contacts1 *Contact configuration when mounted on switch, not shelf state. BDAUX12, 13 BDZX129 Description For use on: Weight (lbs) AC thermal amp rating AC rated voltage Catalog number Detachable neutral mounts on side of switch or DIN rail BDNF175A BDNF200A 0.84 200 600 BDZX129 For use on: Weight (lbs) Enclosed Fused Terminal poles Description BDTS2 Includes one set of 3 shrouds for use on line or load side BDNF175A BDNF200A 0.40 Enclosed Non-Fused Terminal shrouds Catalog number BDTS2 Handle support bracket Description BDZX131 Allows handle to be directly mounted to switch behind the door For use on: BDNF175A BDNF200A Weight (lbs) Catalog number 0.33 BDZX131 1 UL File E57057 43 Accessories Bussmann(R) for 175A - 200A Non-Fusible Disconnect Switches Locking accessories Fusible CDETL-ZW16 Description For use on: Cam attachment for Kirk Key, Castell, Lowe & Fletcher and Ronis interlock. For adapting to the interlock system The interlock is not included. 5, 6 & 8mm shafts Electrical interlock1 Closed circuit principle for interlocking the switch movement. When the coil circuit is dead, A-types cannot be operated to ON-position and L-types cannot be operated to ON- or OFF-position. Coil voltages 110VAC, 220VAC, 24VDC, 48VDC, 60 VDC, 110VDC, 220VDC, P = 15W U = 0.7 - 1.1 Un (U = coil voltage, Un = nominal voltage) BDNF175A - BDNF200A Weight (lbs.) 0.29 Catalog number CDETL-ZW16 CDETL-ZT80A/ 2.42 CDETL-ZT80L/ BDNF175A - BDNF200A 0.35 CDETL-ZT140 Description For use on: Weight (lbs.) Catalog number Joins two shafts together for applications where extended length is required 12mm shafts 0.26 BDZW95 Mounting bracket Non-Fused - Coil voltage CDETL-ZT 80A Enclosed Fused CDETL-ZT140 Shaft extension coupler Enclosed Non-Fused BDZW95 Shaft adapter CDZT123 44 Description For use on: Weight (lbs.) Catalog number Adapts one end of an 8mm shaft to a 12mm shaft. Use with shaft extension coupler. 8mm shafts 0.20 CDZT123 1 CDETL-ZT140 mounting bracket required. Accessories Bussmann(R) for 175A - 200A Non-Fusible Disconnect Switches Conversion mechanisms * Switches are not included BDZW18 BDZW20 BDZW20X BDZW21 BDZW21X BDZW19 1 6 or 8 pole -- BDZW18 IO N BDZW20 6 (8) pole mechanism allows two switches controlled by one handle to open or close simultaneously. Shafts included. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches * One handle POS.I O X SW. B O X 1 SW. A SW. B SW. A SW. B SW. A SW. B LOAD LOAD LOAD I O II POS. I POS.O POS.II SW. A X O O SW. B O O X X = Closed O = Open 1 Bypass -- BDZW21 BDZW21 POS. O SW. A X = Closed O = Open Transfer -- BDZW20 Transfer mechanism manually transfers between two power sources using two switches and a center OFF position. A 3-position handle is included: (Type 1, 3R, 12) or (Type 1, 3R, 4, 4X, 12) Shafts included. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches Bypass mechanism operates three switches: Two switches in series and one changeover switch to allow power bypass. A 3-position handle is included: (Type 1,3R & 12) or (Type 1, 3R, 4, 4X, 12) Shafts included. Equipment required for a complete installation: * One conversion mechanism * Three disconnect switches POS. I POS.O POS.II SW. A O O X SW. B O O X SW. C X O O SW. A POS. I SW. B POS. I SW. A X O SW. B O X X = Closed O = Opean Mechanical interlock -- BDZW19 Mechanical interlock mechanism prevents both switches from being in the ON position at the same time. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches * Two handles * Two shafts BDZW19 1 Fusible BDNF175A BDNF200A 1.61 6.17 6.17 7.27 7.27 4.41 Catalog number Non-Fused BDZW18 Weight (lbs) 1 X = Closed O = Open = Three poles 45 Enclosed Fused 6 or 8 pole Transfer Transfer Bypass Bypass Mechanical interlock For use on: Enclosed Non-Fused Description 400A - 800A Bussmann(R) Non-Fusible Disconnect Switches Fusible For a complete assembly, please select one of each: 1 switch 1 handle 1 shaft 1 terminal lug kit BDNF400 + BDS280 + BDH116 + BDTL26 400 - 800 Amp switches, 600V UL general purpose amp rating 2 pole BDNF600A 3 pole Non-Fused 4 pole IEC AC21 amp rating 200V 208V 240V 480V 600V 400 600 800 630 800 1250 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- BDNF4002 BDNF600A2 BDNF800A2 400 600 800 630 800 1250 100 150 200 100 150 200 125 200 250 250 400 500 350 500 600 BDNF400 BDNF600A BDNF800A 400 600 -- 630 800 1250 100 150 200 100 150 200 125 200 250 250 400 500 350 500 600 BDNF4004 BDNF600A4 BDNF800A4 Maximum horsepower rating Pistol handles -- for use with shafts BDNF800A Enclosed Fused BDH112-117 IEC type Color Length in/mm Marking Defeatable Padlockable Weight (lbs) 1,3R,12 1,3R,12 1,3R,12 1,3R,12 1,3R,12 1,3R,12 IP65 IP65 IP65 IP65 IP65 IP65 Blk R/Y Blk R/Y Blk R/Y 4.9/125 4.9/125 5.7/145 5.7/145 6.9/175 6.9/175 O/I & Off/On O/I & Off/On O/I & Off/On O/I & Off/On O/I & Off/On O/I & Off/On Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 0.39 0.39 0.39 0.39 0.41 0.41 BDH112 BDH113 BDH114 BDH115 BDH116 BDH117 1,3R,4,4X,12 1,3R,4,4X,12 1,3R,4,4X,12 1,3R,4,4X,12 IP66 IP66 IP66 IP66 Blk R/Y Blk R/Y 5.7/145 5.7/145 6.9/175 6.9/175 O/I & Off/On O/I & Off/On O/I & Off/On O/I & Off/On Yes Yes Yes Yes Yes Yes Yes Yes 0.39 0.39 0.41 0.41 CDHXB12 CDHXY12 CDHXB22 CDHXY22 1,3R,4,4X,12 IP65 Metal 8.7/220 Off/On -- Yes 1.50 BDH8 Enclosed Non-Fused Shaft length inches/mm 11.0/280 12.8/325 15.6/395 18.3/465 21.1/535 Twisted shafts -- Rotates handle 45 Shaft length inches/mm 11.0/280 12.8/325 18.3/465 BDS__45 46 .47 x .47" ( 12 x 12 mm) NEMA type Shafts -- for use with pistol handles BDS280 Catalog number Catalog number .47 x .47" ( 12 x 12 mm) Mounting depth1 in inches 10.2 12.0 14.8 17.5 20.3 - - - - - 14.5 16.3 19.1 21.9 24.6 Weight (lbs) Catalog number 0.77 0.90 1.10 1.32 1.54 BDS280 BDS325 BDS395 BDS465 BDS535 .47 x .47" ( 12 x 12 mm) Mounting depth1 in inches 10.2 12.0 17.5 - 14.5 - 16.3 - 21.9 Weight (lbs) 0.77 0.90 1.32 1 Mounting depth is the distance from the outside of the door to the disconnect switch mounting plate. Shaft can be cut to desired length. Catalog number BDS28045 BDS32545 BDS46545 Accessories Bussmann(R) for 400A - 800A Non-Fusible Disconnect Switches Terminal lug kits BDTL27 BDTL26 Wire size Kit weight (lbs.) Wire type Terminal lugs per kit Kit catalog number BDNF400 #2 - 600 kcmil 3.50 Cu/Al 6 BDTL26 BDNF400 (2) #2 - 500 kcmil 4.62 Cu/Al 6 BDTL262 BDNF600A (2) #2 - 600 kcmil 4.62 Cu/Al 6 BDTL27 BDNF800A (2) #2 - 600 kcmil 6.90 Cu/Al 6 BDTL30 6.90 1.10 Cu/Al Cu/Al 3 6 BDTL32 BDTL175/400 Weight (lbs) AC thermal amp rating AC rated voltage Catalog number 1 N.O. + 1 N.C. 0.20 10 600 BDAUX1 2 N.O. + 2 N.C. 0.26 10 600 BDAUX2 BDNF800A1 BDNF400 - BDNF600A1 (8) 2/0 + (2)#2 600 kcmil (12) #14 - 6 Fusible For use on: BDTL30 BDAUX1-6 4 N.O. + 4 N.C BDNF400 - 0.40 10 600 BDAUX3 2 N.O. BDNF800A 0.18 10 600 BDAUX4 4 N.O. 0.25 10 600 BDAUX5 8 N.O. 0.40 10 600 BDAUX6 Weight (lbs) AC thermal amp rating AC rated voltage Catalog number Terminal poles Description Detachable neutral mounts on side of switch or DIN rail BDZX85 BDNF400 - BDNF600A 1.04 400 600 BDZX85 For use on: Weight (lbs) Catalog number Includes one BDNF400 0.62 BDTS4 shroud for line or BDNF600A 0.66 BDTS6A load side BDNF800A 0.88 BDTS8A For use on: Weight (lbs) Catalog number BDNF400 - BDNF600A 0.51 BDZX73 BDNF800A 0.88 BDZX71 Handle support bracket Description Allows handle to be directly mounted to switch behind the door BDZX71 For use on: Terminal shrouds Description BDTS__ For use on: Non-Fused Description Enclosed Fused BDTL32 Auxiliary contacts2 Enclosed Non-Fused BDTL175/400 1 A load side distribution lug eliminates the need to purchase, install and wire a separate distribution block. 2 UL File E57057 47 Accessories Bussmann(R) for 400A - 800A Non-Fusible Disconnect Switches 90 angle kit Description Converts switch mechanism from front operation to side operation For use on: Weight (lbs) Catalog number BDNF400 BDNF600A BDNF800A 4.63 For use on: Weight (lbs) Catalog number 12mm shafts 0.26 BDZW95 For use on: Weight (lbs) Catalog number 12mm shafts 0.29 CDETL-ZW5 BDNF400 BDNF600A BDNF800A 2.42 CDETL-ZT80A/ CDETL-ZT80L/ BDNF400 BDNF600A 0.40 CDETL-ZT100 BDZX108 Fusible BDZX108 Shaft extension coupler Description BDZW95 Joins two shafts together for applications where extended length is required Locking accessories Non-Fused Description CDETL-ZW5 Enclosed Fused Cam attachment for Kirk Key, Castell, Lowe & Fletcher and Ronis interlock. For adapting to the interlock system The interlock is not included. Electrical interlock1 Closed circuit principle for interlocking the switch movement. When the coil circuit is dead, A-types cannot be operated to ON-position and L-types cannot be operated to ON- or OFF-position. Coil voltages 110VAC, 220VAC, 24VDC, 48VDC, 60 VDC, 110VDC, 220VDC, P = 15W U = 0.7 - 1.1 Un (U = coil voltage, Un = nominal voltage) Mounting bracket - Coil voltage Enclosed Non-Fused CDETL-ZT80_ CDETL-ZT100 48 1 CDETL-ZT100 mounting bracket required for BDNF400 & BDNF600A Accessories Bussmann(R) for 400A - 800A Non-Fusible Disconnect Switches Conversion mechanisms BDZW9 Catalog number 2.42 10.1 8.81 BDZW9 BDZW12 BDZW13 1.26 1.15 2.64 BDZW3 BDZW14 BDZW15 6 or 8 pole -- BDZW9 6 (8) pole mechanism allows two switches controlled by one handle to open or close simultaneously. One shaft included. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches * One handle * One additional shaft (Only one shaft is included with mechanism). 1 BDZW12 POS.I O X SW. B O X X = Closed O = Open 1 Transfer -- BDZW12 Transfer mechanism manually transfers between two power sources using two switches and a center OFF position. A 3 position handle is included. Shafts included. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches POS.O SW. A SW. A SW. B SW. A SW. B SW. A SW. B LOAD LOAD LOAD I O II POS. I POS.O POS.II SW. A X O O SW. B O O X X = Closed O = Open Bypass -- BDZW13 1 Bypass mechanism operates three switches: Two switches in series and one changeover switch to allow power bypass. A 3 position handle is included. (UL Type 1, 3R, 4, 4X, 12). Shafts included. Equipment required for a complete installation: * One conversion mechanism * Three disconnect switches POS. I POS.O POS.II SW. A O O X SW. B O O X SW. C X O O SW. A POS. I SW. B POS. I SW. A X O SW. B O X X = Closed O = Open Mechanical interlock -- BDZW3, BDZW14, BDZW15 BDZW13 Mechanical interlock mechanism prevents both switches from being in the ON position at the same time. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches * Two shafts * Two handles 1 X = Closed O = Open BDZW3, 14, 15 1 Non-Fused Mechanical interlock BDNF400 BDNF600A BDNF800A Weight (lbs) = Three poles 49 Enclosed Fused 6 or 8 pole Transfer Bypass For use on: Enclosed Non-Fused Description Fusible * Switches are not included 1200A - 3150A Bussmann(R) Non-Fusible Disconnect Switches Fusible For a complete assembly please select one of each: 1 switch 1 handle 1 shaft 1 terminal lug kit BDNF1200 + BDS280 + BDH117 + BDTL28 1200 - 3150 Amp switches, 600V UL general purpose amp rating 2 pole 3 pole Non-Fused BDNF1600 BDNF2000 BDNF3150 4 pole IEC AC21 amp rating 1200 1600 2000 - 1600 2500 2500 3150 1200 1600 2000 -- 1600 2500 2500 3150 -- -- -- -- 1600 2500 2500 3150 Maximum horsepower rating Catalog number -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- The US National Electric Code does not specify HP -- -- -- -- -- ratings for switches this large. Please select a switch based on 115% of application FLA. For example: a motor with an FLA of 800A would require a 1200A switch: 800A x 115% = 920A, the closest higher rated switch is 1200A. -- -- -- -- -- Enclosed Fused NEMA type IEC type BDNF1200 BDNF1600 BDNF2000 BDNF3150 BDNF12004 BDNF16004 BDNF20004 BDNF31504 Pistol handles -- for use with shaft BDH114 BDNF12002 BDNF16002 BDNF20002 BDNF31502 .47 x .47" ( 12 x 12mm) Color Length mm Marking Defeatable Padlockable Weight (lbs) Catalog number For use with BDNF1200 BDH115 1,3R,12 1,3R,12 1,3R,12 1,3R,12 IP65 IP65 IP65 IP65 Black Red/Yellow Black Red/Yellow 5.7/145 5.7/145 6.9/175 6.9/175 O/I & Off/On O/I & Off/On O/I & Off/On O/I & Off/On Yes Yes Yes Yes Yes Yes Yes Yes 0.39 0.39 0.41 0.41 BDH114 BDH115 BDH116 BDH117 1,3R,4,4X,12 1,3R,4,4X,12 1,3R,4,4X,12 1,3R,4,4X,12 IP66 IP66 IP66 IP65 Black Red/Yellow Black Red/Yellow 5.7/145 5.7/145 6.9/175 6.9/175 O/I & Off/On O/I & Off/On O/I & Off/On O/I & Off/On Yes Yes Yes Yes Yes Yes Yes Yes 0.39 0.39 0.41 0.41 CDHXB12 CDHXY12 CDHXB22 CDHXY22 Metal 8.7/220 Off/On -- Yes 1.50 BDH8 For use with BDNF1600 - 3150 1,3R,4,4X,12 IP65 Enclosed Non-Fused Shafts -- for use with pistol handles .47 x .47" ( 12 x 12 mm) BDH8 Shaft length inches/mm Mounting depth1 in inches Weight (lbs) Catalog number For use with BDNF1200 11.0/280 12.8/325 15.6/397 18.3/465 21.1/536 11.6 13.7 16.2 18.9 21.7 - - - - - 15.3 17.1 19.9 22.6 25.4 0.77 0.90 1.10 1.32 1.54 BDS280 BDS325 BDS395 BDS465 BDS535 13.7 16.2 18.9 21.7 - - - - 17.1 19.9 22.6 25.4 0.90 1.10 1.32 1.54 BDS325 BDS395 BDS465 BDS535 For use with BDNF1600 - 3150 BDS325 12.8/325 15.6/397 18.3/465 21.1/536 1 Mounting depth is the distance from the outside of the door to the disconnect switch mounting plate. Shaft can be cut to desired length. 50 Accessories Bussmann(R) for 1200A - 3150A Non-Fusible Disconnect Switches Twisted shafts - Rotates handle 45 .47 x .47" ( 12 x 12 mm) Mounting depth1 in inches Shaft length inches/mm Weight (lbs) Catalog number For use with BDNF1200 11.0/280 11.6 - 15.3 0.77 12.8/325 13.7 - 17.1 0.90 BDS28045 BDS32545 18.3/465 18.9 - 22.6 1.32 BDS46545 Fusible BDS__45 For use with BDNF1600 - 3150 12.8/325 16.2 - 19.9 0.90 BDS32545 18.3/465 18.9 - 22.6 1.32 BDS46545 BDTL28 BDTL28/2 Terminal lug kits BDNF1200 & BDNF1600 BDNF1200 & BDNF16002 BDNF2000 & BDNF3150 Wire size Kit weight (lbs.) Wire type Terminal lugs per kit Kit catalog number (4) #2 - 600kcmil 10.44 Cu/Al 6 BDTL28 (8) 2/0 + (2) #2 600kcmil 10.44 Cu/Al 3 BDTL32 (8) #2 - 600kcmil 20.88 Cu/Al 12 BDTL28/2 Non-Fused For use on: BDTL32 Power distribution lugs eliminate the need to purchase a separate distribution block BDBUS115 Busbar connections Vertical mounting3 Vertical, back or edgewise mounting For use on: Weight (lbs) BDNF1600 - BDNF3150 46.2 31.0 For use on: Weight (lbs) Catalog number BDBUS115 BDBUS114 Enclosed Fused Description Auxiliary contacts4 BDAUX1 BDAUX1 Description AC thermal amp rating AC rated voltage Catalog number 1 N.O. + 1 N.C. 0.20 10 600 BDAUX1 2 N.O. + 2 N.C. 0.26 10 600 BDAUX2 4 N.O. + 4 N.C. BDNF1200 - 0.40 10 600 BDAUX3 2 N.O. BDNF3150 0.18 10 600 BDAUX4 4 N.O. 0.25 10 600 BDAUX5 8 N.O. 0.40 10 600 BDAUX6 Enclosed Non-Fused BDBUS114 Terminal shrouds Description For use on: Weight (lbs) Catalog number Includes one shroud for line or load side BDNF1200 1.20 BDTS12 1 Mounting depth is the distance from the outside of the door to the disconnect switch mounting plate. Shaft can be cut to desired length. 2 A load side distribution lug eliminates the need to purchase, install and wire a separate distribution block. 3 Provided as standard with BDNF1600, BDNF2000 and BDNF3150. 51 Accessories Bussmann(R) for 1200A - 3150A Non-Fusible Disconnect Switches Handle support bracket For use on: Weight (lbs) Catalog number BDNF1200 - BDNF3150 0.88 BDZX71 Description For use on: Weight (lbs) Converts switch mechanism from front operation to side operation BDNF1200 - BDNF3150 4.63 BDZX90 Description For use on: Weight (lbs) Catalog number Joins two shafts together for applications where extended length is required 12mm shafts 0.26 BDZW95 For use on: Weight (lbs) Catalog number 12mm shafts 0.29 Description Allows handle to be directly mounted to switch behind the door Fusible BDZX71 90 angle kit Catalog number Non-Fused BDZX90 Shaft extension coupler BDZW95 Enclosed Fused Locking accessories Description Enclosed Non-Fused CDETL-ZW5 Cam attachment for Kirk Key, Castell, Lowe & Fletcher and Ronis interlock. For adapting to the interlock system The interlock is not included. Electrical interlock Closed circuit principle for interlocking the switch movement. When the coil circuit is dead, A-types cannot be operated to ON-position and L-types cannot be operated to ON- or OFF-position. Coil voltages 110VAC, 220VAC, 24VDC, 48VDC, 60 VDC, 110VDC, 220VDC, P = 15W U = 0.7 - 1.1 Un (U= coil voltage, Un = nominal voltage) = Coil voltage CDETL-ZT80 52 BDNF1200 - BDNF3150 2.42 CDETL-ZW5 CDETL-ZT80A/ CDETL-ZT80L/ Accessories Bussmann(R) for 1200A - 3150A Non-Fusible Disconnect Switches Conversion mechanisms * Switches are not included Weight (lbs) Catalog number BDNF1200 2.42 10.1 8.81 BDZW9 BDZW12 BDZW13 BDNF1200 - BDNF3150 2.64 BDZW15 For use on: 6 or 8 pole Transfer Bypass Mechanical interlock Fusible Description BDZW9 6 or 8 pole -- BDZW9 6 (8) pole mechanism allows two switches controlled by one handle to open or close simultaneously. One shaft included. Equipment required for a complete installation: * One conversion mechanism. * Two disconnect switches * One handle * One addtional shaft (Only one shaft is included with mechanism) 1 X SW. B O X SW. B SW. A SW. B SW. A SW. B LOAD LOAD LOAD I O II Bypass -- BDZW13 POS. I POS.O POS.II SW. A X O O SW. B O O X X = Closed O = Open 1 Bypass mechanism operates three switches: Two switches in series and one changeover switch to allow power bypass. A 3 position handle is included. Shafts included. Equipment required for a complete installation: * One conversion mechanism * Three disconnect switches POS. I POS.O POS.II SW. A O O X SW. B O O X SW. C X O O SW. A POS. I SW. B POS. I SW. A X O SW. B O X X = Closed O = Open Mechanical interlock --BDZW15 BDZW13 Mechanical interlock mechanism prevents both switches from being in the "ON" position at the same time. Handles are not included. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches * Two shafts * Two handles 1 X = Closed O = Open BDZW15 1 = Three poles 53 Enclosed Fused SW. A Non-Fused 1 Enclosed Non-Fused BDZW12 POS.I O X = Closed O = Open Transfer -- BDZW12 Transfer mechanism manually transfers between two power sources using two switches and a center OFF position. A 3 position handle is included. Shafts included. Equipment required for a complete installation: * One conversion mechanism * Two disconnect switches POS. O SW. A Side Operated Non-Fusible Disconnect Switches Bussmann(R) 30A - 800A12 Fusible For a complete assembly, please select one of each: 1 switch 1 handle 1 shaft 1 terminal lug kit BDFLNF200A-S + BDS240 + BDH110SH Side operated switches -- 3 pole UL general purpose amp rating BDFLNF30-S Non-Fused 30 60 100 175 200 400 600 IEC AC21 amp rating Maximum horsepower rating 200V 208V 240V 480V 600V 32 63 125 200 250 630 800 5 15 25 30 60 100 150 7.5 15 25 30 60 100 150 7.5 15 30 40 75 125 200 15 30 60 75 150 250 400 20 50 75 100 200 350 500 Weight (lbs) Three phase 1.90 3.90 4.50 6.61 6.61 13.66 13.66 Catalog number BDFLNF30-S BDFLNF60-S BDFLNF100-S BDFLNF175-S BDFLNF200A-S BDFLNF400-S BDFLNF600A-S Handles UL type Color Length inches/mm Marking Defeatable Padlockable Weight (lbs) Catalog number 1, 12, 3R Black 2.65/65 O/1 & Off/On Yes Yes 0.29 BDH106SH 1, 12, 3R Red/Yellow 2.65/65 O/1 & Off/On Yes Yes 0.29 BDH107SH For use with BDFLNF30-S BDH107SH For use with BDFLNF60-S -- BDFLNF200A-S Enclosed Fused 1, 12, 3R Black 3.1/80 O/1 & Off/On Yes Yes 0.30 BDH110SH 1, 12, 3R Red/Yellow 3.1/80 O/1 & Off/On Yes Yes 0.30 BDH111SH O/1 & Off/On O/1 & Off/On Off/On Yes Yes Yes Yes Yes Yes 0.39 0.39 1.50 BDH114SH BDH115SH BDZX74 For use with BDFLNF400-S -- BDFLNF600A-S 1, 12, 3R 1, 12, 3R 1, 12, 3R 4.9/145 4.9/145 4.9/145 Shafts BDZX74 Enclosed Non-Fused CDS67P BDS240 BDS325 BDTL24 Black Red/Yellow metal For use with: Length inches/mm Description Weight (lbs) Catalog number BDFLNF30-S 6.7/170 .20 x .20" (5 x 5mm) 0.08 CDS67P BDFLNF60 - 100 8.3/210 .24 x .24" (6 x 6mm) 0.10 BDS210 BDFLNF175 - 200 9.5/240 .31 x .31" (8 x 8mm) 0.26 BDS240 BDFLNF400-S - 600A-S 12.8/325 .47 X .47" (12 X 12mm) 0.90 BDS325 Terminal lug kits BDTL25 For use on: Wire size Weight (lbs) Wire type Lugs per kit Catalog number BDFLNF30-S BDFLNF60-S BDFLNF100-S BDFLNF175-S BDFLNF200A-S BDFLNF400-S BDFLNF600A-S #14 - 4 #14 - 4 #14 - 2/0 #6 - 300 kcmil #6 - 300 kcmil #2 - 600 kcmil (2) #2 - 600 kcmil -- -- 0.43 0.93 0.93 3.520 4.62 Cu Cu Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al -- -- 6 6 6 6 6 Integral Integral BDTL24 BDTL25 BDTL25 BDTL26 BDTL27 1 Side operated switches available through 800A as IEC rated. BDTL26 54 BDTL27 Flange Operated Non-Fusible Disconnect Switches Bussmann(R) 30A - 200A BDFLNF200A-F + BDFHS12 + BDFHNHS12 + BDTL25 Fusible For a complete assembly, please select one of each: 1 switch 1 handle 1 shaft 1 terminal lug kit Flange operated switches -- 3 pole IEC AC21 amp rating 200V 208V 240V 480V 600V 40 63 115 250 10 20 25 60 10 20 25 60 10 20 25 75 20 40 50 150 30 40 40 200 30 60 100 200 Maximum horsepower rating Weight (lbs) Three phase Catalog number 2.80 3.90 4.50 6.61 BDFLNF30-F BDFLNF60-F BDFLNF100-F BDFLNF200A-F Catalog number Non-Fused UL general purpose amp rating Flange handles NEMA/UL type Color Length inches/mm Marking Defeatable Padlockable Weight (lbs) 1, 3R, 12 4, 4X Metal Metal 6.9/175 6.9/175 O/I & OFF/ON O/I & OFF/ON Yes Yes Yes Yes 3.52 3.52 BDFHNHS12 BDFHNHS4 Enclosed Fused BDFHNHS12 Shafts Shaft length inches Weight (lbs) Catalog number 12 17 22.5 0.39 0.55 0.73 BDFHS12 BDFHS17 BDFHS22 BDFHS12 BDTL24 For use on: Wire size Kit weight (lbs) Wire type Terminal lugs per kit Catalog number BDFLNF30-F BDFLNF60-F BDFLNF100-F #14 - #4 #14 - #4 #14 - 2/0 -- Cu -- Standard BDTL24 BDFLNF200A-F #6 - 300 kcmil 0.93 Cu/Al 6 BDTL25 Enclosed Non-Fused Terminal lug kits BDTL25 isted ed UL L prov p A CSA ated IEC R ed ark CE M Door hardware - NEMA 12 Description Weight (lbs) Catalog number Safety door latch, 2 point with 6" handle. Roller for 3 point latch, add to BDDHK 1.92 .39 BBDHK BD3RL 55 UL & CSA Technical Data Bussmann(R) for Non-Fusible Disconnect Switches CDNF16 - CDNF160 UL & CSA Catalog number Approvals1 3 pole CDNF16 CDNF25 CDNF32 CDNF45 CDNF63 CDNF30 CDNF60 CDNF100 CDNF160 2 pole 3 pole 4 pole N/A UL508 & IEC UL508 & IEC N/A UL508 & IEC UL508 & IEC N/A UL508 & IEC UL508 & IEC N/A UL508 & IEC UL508 & IEC N/A UL508 & IEC UL508 & IEC N/A UL98 & IEC UL98 & IEC N/A UL98 & IEC UL98 & IEC N/A UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC A 16 25 40 60 80 30 60 100 125 V 600 600 600 600 600 600 600 600 600 -40 to 40C General purpose amp rating pf = 0.7 - 0.8 Max. operating voltage Max. horsepower rating/motor FLA current, Fusible pf = 0.4 - 0.5 Three phase Single phase 200V - 208V HP/A 3/10.6 7.5/24.2 10/30.8 15/46.2 20/60.0 10/30.8 20/60.0 25/75.0 30/88.0 240V HP/A 5/15.2 7.5/22.0 10/28.0 15/42.0 20/54.0 10/28.0 20/54.0 25/68.0 30/80.0 480V HP/A 10/14.0 15/21.0 20/27.0 30/40.0 40/52.0 20/27.0 40/52.0 50/65.0 60/77.0 600V HP/A 10/11.0 20/22.0 25/27.0 20/22.0 40/41.0 30/32.0 40/41.0 40/41.0 75/77.0 120V HP/A 0.5/9.8 0.75/13.8 1/16.0 2/24.0 2/24.0 2/24.0 3/34.0 5/56.0 7.5/80 240V HP/A 1.5/10.0 2/12.0 3/17.0 5/28.0 5/28.0 5/28.0 7.5/40.0 15/68.0 20/88.0 Short circuit rating with fuse Fuse type CC kA 10 -- 10 --- 10 --- -- -- -- -- -- -- -- -- -- -- -- Fuse type J kA 10 10 10 10 10 10 100 -- 100 -- 50 -- 50 25 50 25 100 Non-Fused Fuse type T kA 10 10 10 10 10 10 100 -- 100 -- 50 -- 50 25 50 25 -- Fuse type RK1 kA 10 -- 10 -- 10 -- -- -- -- -- -- -- -- -- -- -- -- Fuse type RK5 kA 5 5 5 5 5 5 -- 5 10 5 -- -- -- -- -- -- -- Fuse type L kA -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Fuse type H kA -- -- -- -- -- -- -- 5 -- 5 -- -- -- -- -- -- -- A 30 60 30 60 30 60 100 150 100 150 60 -- 60 100 60 100 200 Fuse size Short circuit rating with MCCB kA -- -- -- -- -- -- -- -- 25 Endurances Min. Electrical endurance, pf = 0.75 - 0.80 operation cycles 6000 6000 6000 6000 6000 6000 6000 6000 6000 Min. Electrical endurance, pf = 0.40 - 0.50 operation cycles 1000 1000 1000 1000 1000 2 2 2 2 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 16,000 Mechanical endurance Enclosed Fused operations Physical characteristics Weight, switches Dimension, switches 3 pole lb 0.24 0.24 0.24 0.59 0.59 0.79 0.79 0.79 2.42 4 pole lb 0.33 0.33 0.33 0.77 0.77 1.10 1.10 1.10 2.86 3 pole H in 2.68 2.68 2.68 3.60 3.60 3.94 3.94 3.94 5.00 W in 1.38 1.38 1.38 2.07 2.07 2.76 2.76 2.76 4.96 D in Shaft size -- square in mm Switch operating torque for rotary 3 pole switches lb. in. Terminal lug kits Enclosed Non-Fused Wire range AWG 2.20 2.20 2.20 2.85 2.85 2.95 2.95 2.95 2.93 .20 x .20 .20 x .20 .20 x .20 .20 x .20 .20 x .20 .20 x .20 .20 x .20 .20 x .20 .24 x .24 5x5 5x5 5x5 5x5 5x5 5x5 5x5 5x5 6x6 8.8 8.8 8.8 10.5 10.5 17.5 17.5 17.5 52.5 Not required Not required Not required Not required Not required Not required Not required Not required Not required #18 - 8 #18 - 8 #18 - 8 #14 - 4 #14 - 1 #14 - 4 #14 - 4 #8 - 1/0 #8 - 1/0 Torque: Wire tightening lb. in. 7 7 7 18 18 55 55 55 70 Lug mounting lb. in. Integral Integral Integral Integral Integral Integral Integral Integral Integral Auxiliary contacts CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ CDEA_ _ _ _ _ NEMA ratings, AC A600 A600 A600 A600 A600 A600 A600 A600 A600 VAC 600 600 600 600 600 600 600 600 600 A 10 10 10 10 10 10 10 10 10 AC maximum volt-ampere making VA 7200 7200 7200 7200 7200 7200 7200 7200 7200 AC maximum volt-ampere breaking VA AC rated voltage AC thermal rated current NEMA ratings, DC DC rated voltage VDC 720 720 720 720 720 720 720 720 720 R300 R300 R300 R300 R300 R300 R300 R300 P600 600 300 300 300 300 300 300 300 300 DC thermal rated current A 1 1 1 1 1 1 1 1 5 DC maximum make-break VA 28 28 28 28 28 28 28 28 138 Torque: Wire tightening lb. in 7 7 7 7 7 7 7 7 7 Wire range AWG #18 - 14 #18 - 14 #18 - 14 #18 - 14 #18 - 14 #18 - 14 #18 - 14 #18 - 14 #22 - 14 1 UL Listed switches are also CSA Approved. 2 UL98 overload test, 50 operations, pf 0.40 - 0.50 at 2x FLA. 56 UL & CSA Technical Data Bussmann(R) for Non-Fusible Disconnect Switches BDNF175 - BDNF3150 UL & CSA Catalog number Approvals1 General purpose amp rating 3 pole BDNF175 BDNF200A BDNF400 BDNF600A BDNF800A BDNF1200 BDNF1600 BDNF2000 BDNF3150 4 2 pole 3 pole 4 pole UL508 & IEC UL508 & IEC IEC UL98 & IEC UL98 & IEC IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC IEC UL98 & IEC UL98 & IEC IEC UL98 & IEC UL98 & IEC IEC UL98 & IEC UL98 & IEC IEC IEC IEC IEC -40 to 40C pf = 0.7 - 0.8 A 175 200 400 600 800 1200 1600 2000 3150 Max. operating voltage V 600 600 600 600 600 600 600 480 -- Fusible Max. horsepower rating/Max. motor FLA current, pf = 0.4 - 0.5 Three phase Single phase 200 - 208V HP/A 30/88.0 60/160.0 100/273.0 150/396.0 200/528.0 -- -- -- -- 240V HP/A 40/104.0 75/192.0 125/312.0 200/480.0 250/602.0 -- -- -- -- 480V HP/A 75/96.0 150/180.0 250/302.0 400/477.0 500/590.0 -- -- -- -- 600V HP/A 100/99.0 200/192.0 350/336.0 500/472.0 600/576 -- -- -- -- 120V HP/A -- -- -- -- -- -- -- -- -- 240V HP/A -- -- -- -- -- -- -- -- -- Fuse type CC kA -- -- -- -- -- -- -- -- -- Fuse type J kA 100 -- -- -- -- -- -- -- -- Fuse type T kA -- -- -- -- -- -- -- -- -- Fuse type RK1 kA -- -- -- -- -- -- -- -- -- Fuse type RK5 kA -- 100 100 100 100 -- -- -- -- Fuse type L kA -- -- -- -- -- 100 100 100 -- Fuse type H kA -- -- -- -- -- -- -- -- -- A 200 200 600 600 1200 1200 2000 2000 -- kA 25 25 50 50 50 50 65 65 -- Fuse size Short circuit rating with MCCB Non-Fused Short circuit rating with fuse operation cycles 6000 6000 1000 1000 500 500 500 500 400 Min. Electrical endurance, pf = 0.40 - 0.50 operation cycles 1000 2 2 2 2 2 2 2 2 16,000 16,000 10,000 10,000 10,000 10,000 6000 6000 6000 Mechanical endurance operations Physical characteristics Weight, switches Dimension, switches 3 pole lb 6.61 6.61 13.66 13.66 35.9 38.55 127.7 127.7 127.7 4 pole lb 8.15 8.15 16.74 16.74 45.15 49.56 149.7 149.7 149.7 3 pole H in 8.35 8.35 11.81 11.77 19.09 19.09 25.04 25.04 25.04 W in 7.83 8.62 10.24 11.93 14.29 14.29 18.43 18.43 18.43 D in 4.55 4.55 5.12 5.12 4.92 4.92 10.67 10.67 10.67 .31 X .31 .31 x .31 .47 x .47 .47 x .47 .47 x .47 .47 x .47 .47 x .47 .47 x .47 .47 x .47 Shaft size -- square Switch operating torque for rotary 3 pole switches in mm 8X8 8x8 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12 lb. in. 71.5 71.5 184 184 184 184 438 438 438 BDTL25 BDTL25 BDTL26 BDTL27 BDTL30 BDTL28 BDTL28 BDTL28/2 BDTL28/2 AWG #6 - 300kcmil3 #6-300kcmil3 #2-600kcmil (2)#2-600kcmil (2)#2-600kcmil (4)#2-600kcmil (4)#2-600kcmil (8)#2-600kcmil (8)#2-600kcmil Terminal lug kits Wire range Torque: Wire tightening lb. in. 375 375 500 375 500 375 375 375 375 Lug mounting lb. in. 230 230 480 500 230 230 230 230 230 Auxiliary contacts BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ NEMA ratings, AC A600 A600 A600 A600 A600 A600 A600 A600 A600 VAC 600 600 600 600 600 600 600 600 600 A 10 10 10 10 10 10 10 10 10 AC maximum volt-ampere making VA 7200 7200 7200 7200 7200 7200 7200 7200 7200 AC maximum volt-ampere breaking VA AC rated voltage AC thermal rated current NEMA ratings, DC DC rated voltage 1 2 3 4 VDC 720 720 720 720 720 720 720 720 720 P600 P600 P600 P600 P600 P600 P600 P600 P600 600 600 600 600 600 600 600 600 600 DC thermal rated current A 5 5 5 5 5 5 5 5 5 DC maximum make-break VA 138 138 138 138 138 138 138 138 138 Torque: Wire tightening lb. in 7 7 7 7 7 7 7 7 7 Wire range AWG #22 - #124 #22 - #14 #22 - #14 #22 - #14 #22 - #14 #22 - #14 #22 - #14 #22 - #14 #22 - #14 UL Listed switches are also CSA Approved. UL98 overload test, 50 operations, pf 0.40 - 0.50 at 2x FLA. Multi-tap lug available. IEC rated only. 57 Enclosed Non-Fused Min. Electrical endurance, pf = 0.75 - 0.80 Enclosed Fused Endurances IEC Technical Data Bussmann(R) for Non-Fusible Disconnect Switches CDNF16 - CDNF160 IEC Catalog number 3 pole Rated insulation and operation voltage, AC20 and DC201 V Rated impulse withstand voltage Rated thermal current, Ith AC 20/DC 20 CDNF16 CDNF25 CDNF32 CDNF45 750 750 750 750 750 kV 8 8 8 8 Fusible AC 22A AC 23A CDNF30 CDNF60 CDNF100 750 750 750 750 8 8 8 8 CDNF160 12 open2 A 25 32 40 63 80 40 63 115 200 40C enclosed A 25 32 40 63 80 40 63 115 160 60C enclosed A 25 32 40 63 80 40 63 115 160 500V A 16 25 32 63 80 40 63 100 1603 690V A 16 25 32 63 80 40 63 100 1000V1 A -- -- -- -- -- -- -- -- -- 500V A 16 25 32 63 80 40 63 100 100 1603 1603 Rated operational currents AC 21A CDNF63 40C 1603 690V A 16 25 32 63 80 40 63 1000V1 A -- -- -- -- -- -- -- -- -- 415V A 16 20 23 45 75 40 63 80 135 500V A 16 20 23 45 58 40 63 60 125 690V A 10 11 12 20 20 40 40 40 80 1000V1 A -- -- -- -- -- -- -- -- -- Non-Fused Rated operational currents/poles in series DC21A DC22A Enclosed Fused DC23A 48V A 16/1 25/1 32/1 4 4 40/1 63/1 100/1 160/1 110V A 16/2 25/2 32/2 45/2 63/2 40/2 63/2 100/2 160/1 220V A 16/3 25/3 32/3 4 4 40/4 63/4 100/4 160/2 440V A 4 4 4 4 4 4 4 4 160/3 750V A 4 4 4 4 4 4 4 4 160/4 48V A 16/1 25/1 32/1 4 4 40/1 63/1 100/1 160/1 110V A 16/2 25/2 32/2 45/2 63/2 40/2 63/2 100/2 160/1 220V A 16/3 25/3 32/4 4 4 40/4 63/4 63/4 160/2 160/3 440V A 4 4 4 4 4 4 4 4 750V A 4 4 4 4 4 4 4 4 4 48V A 16/1 25/1 32/1 4 4 40/1 63/1 100/1 160/1 110V A 16/2 25/2 32/2 45/2 63/2 40/2 63/2 100/2 160/1 220V A 16/4 25/4 32/4 4 4 40/4 63/4 63/4 160/2 440V A 4 4 4 4 4 4 4 4 160/3 750V A 4 4 4 4 4 4 4 4 4 Rated operational power AC23A 230V kW 3 4 5.5 11 22 7.5 11 22 45 400/415V kW 7.5 9 11 22 37 15 18.5 37 75 500V kW 7.5 9 11 22 37 15 18.5 37 75 690V kW 7.5 9 11 15 18.5 15 15 37 75 50 Enclosed Non-Fused Short-circuit current kA 50 50 50 50 50 50 50 50 with back-up fuses of size1 A 25 32 40 63 80 100 100 100 200 Load Figure 1 1 1000V, IEC 408. 2 The ambient air temperature does not exceed +40C and its average over a period of 24 hours does not exceed +35C according to IEC 947. 3 IEC 947-3, utilization category B, infrequent operation. 4 Not available at time of printing, please consult factory. 58 IEC Technical Data Bussmann(R) for Non-Fusible Disconnect Switches BDNF175 - BDNF3150 IEC Catalog number 3 pole Rated insulation and operational voltage, AC20 and DC201 V 40C Rated impulse withstand voltage kV open2 A 1000 BDNF175 BDNF200A BDNF400 BDNF600A 1000 1000 1000 1000 12 12 12 12 BDNF800A BDNF1200 BDNF1600 BDNF2000 BDNF3150 1000 1000 1000 1000 8 8 8 8 8 315 315 630 800 1250 1600 2500 2500 3150 40C enclosed A 270 270 630 720 1250 1600 2300 2300 2600 60C enclosed A 220 220 630 720 1250 1600 2300 2300 2600 500V A 250 250 630 800 1250 1600 25003 31503 A 250 250 630 800 1250 1600 25003 25003 690V 1000V1 A 250 250 630 630 -- -- -- -- -- 500V A 250 250 630 800 1250 1600 16003 16003 16003 Rated operational currents AC 21A AC 22A AC 23A 25003 31503 690V A 250 250 630 800 -- -- -- -- -- 1000V1 A 250 250 400 400 -- -- -- 8003 -- 8003 8003 415V A 250 250 630 720 800 800 -- 8003 500V A 250 250 580 600 800 800 8003 8003 690V A 250 250 350 350 -- -- -- -- -- 1000V1 A 125 125 200 200 -- -- -- -- -- Rated operational currents/poles in series DC22A DC23A 48V A 250 250 630 800 1250 1600 1600 1600 1600 110V A 250 250 630 800 1250 1600 1600 1600 1600 1600/2 220V A 250/2 250/2 630/2 800/2 1250/2 1600/2 1600/2 1600/2 440V A 250/3 250/3 400/3 500/3 -- -- -- -- -- 750V A 250/4 250/4 -- -- -- -- -- -- -- 48V A 250 250 630 800 4 4 4 4 4 110V A 250 250 630 630 4 4 4 4 4 220V A 250/2 250/2 400/2 500/2 4 4 4 4 4 440V A 250/3 250/3 400/3 500/3 4 4 4 4 4 750V A 250/4 250/4 -- -- 4 4 4 4 4 48V A 250 250 630 800 4 4 4 4 4 110V A 250 250 630 800 4 4 4 4 4 220V A 250/2 250/2 630/2 630/2 4 4 4 4 4 440V A 250/3 250/3 400/3 400/3 4 4 4 4 4 750V A 250/4 250/4 -- -- 4 4 4 4 4 Enclosed Fused DC21A Rated operational power 230V kW 75 75 180 200 250 250 250 250 250 400/415V kW 132 132 315 355 400 400 400 400 400 500V kW 160 160 355 400 450 450 450 450 450 690V kW 200 200 355 355 -- kA 100 100 80 80 50 -- 505 -- 504 -- 504 504 400 400 630 800 1000 1250 1250 1250 1250 Short-circuit current with back-up fuses of size1 A -- Enclosed Non-Fused AC23A Non-Fused AC 20/DC 20 Fusible Rated thermal current, Ith Load Figure 1 1 1000V, IEC 408. 2 The ambient air temperature does not exceed +40C and its average over a period of 24 hours does not exceed +35C according to IEC 947. 3 IEC 947-3, utilization category B, infrequent operation. 4 Not available at time of printing, please consult factory. 59 IEC Technical Data Bussmann(R) for Non-Fusible Disconnect Switches CDNF16 - CDNF160 IEC Catalog number 3 pole CDNF45 CDNF63 CDNF30 V/V 415 415 415 415 415 415 415 415 kA 50 50 50 50 50 50 50 50 80/50 A 16 32 40 63 80 100 100 100 160/250 Max. allowed cut-off current, peak value kA 4 4.3 4.6 8.3 11 9.2 9.2 9.2 21.0/21.6 Rated short-circuit making capacity, prospective peak value, Icm kA 0.7 0.7 0.7 1.4 1.4 3.6 3.6 3.6 12 Rated voltage, Ue Rated conditional short-circuit current Max. allowed fuse size, type OFAA Fusible Rated short time withstand current, RMS lcw 0.2s RMS lcw 1.0s CDNF16 CDNF25 CDNF32 CDNF60 CDNF100 CDNF160 415/690 kA -- -- -- -- -- -- -- -- 7 kA 0.5 0.5 0.5 1 1 2.5 2.5 2.5 4 AC breaking capacity pf = 0.35 415V A 128 160 184 240 304 320 504 640 1080 500V A 128 160 184 240 256 320 504 504 1000 690V A 80 88 96 160 160 320 320 320 640 1000V1 A -- -- -- -- -- -- -- -- -- DC breaking capacity/poles in series L/R = 15ms, 3 pole in series Non-Fused 48V A 64/1 100/1 128/1 180/1 252/1 160/1 252/1 400/1 640/1 110V A 64/2 100/2 128/2 180/2 180/2 160/2 252/2 400/2 640/1 220V A 64/3 100/4 128/4 180/4 180/4 160/4 252/4 252/4 640/2 440V A 2 2 2 2 2 2 2 -- 640/3 -- 750V Capacitor ratings 400/415V Rated capacitor duty A 2 2 2 2 2 2 2 -- kVar 2 2 2 2 2 2 2 2 2 kA 2 2 2 2 2 2 2 2 2 Physical characteristics Electrical endurance at rated operational current, pf = 0.65 operation cycles Mechanical endurance Weight Enclosed Fused Dimension 3 pole operations 3000 3000 3000 3000 3000 3000 3000 3000 1000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 16,000 3 pole kg 0.11 0.11 0.11 0.27 0.27 0.36 0.36 0.36 1.1 4 pole kg 0.15 0.15 0.15 0.35 0.35 0.5 0.5 0.5 1.3 127 H mm 68 68 68 91.5 91.5 100 100 100 W mm 35 35 35 52.5 52.5 70 70 70 126 D mm 56 56 56 72.5 72.5 75 75 75 74.5 Power loss per pole W Shaft size -- square mm 0.3 0.6 1 1.4 2.8 1 1.6 4 6.5 5X5 5x5 5x5 5x5 5x5 5x5 5x5 5x5 6x6 Switch operating torque for rotary 3 pole switches Suitable conductor cross section Cu Nm 1 1 1 1.2 1.2 2 2 2 6 mm2 0.75 - 10 0.75 - 10 0.75 - 10 1.5 - 35 1.5 - 35 1.5 - 25 1.5 - 25 1.5 - 25 10 - 70 Bolt size -- -- -- CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ CDAUX_ _ VAC 690 690 690 690 690 690 690 690 690 A 16 16 16 16 16 16 16 16 10 A -- -- -- -- -- -- -- -- 8/-- --/1.1 Auxiliary contacts -- -- -- -- -- -- Ratings according to IEC 9-47-5-1 Enclosed Non-Fused Rated voltage, Ui Thermal current, Ith AC12/DC12 Ie, A Ue = 120V 125V A -- -- 63 -- 63 -- 63 -- 63 -- A -- 63 -- 240V 63 63 63 6/-- 250V A -- 43 -- 43 -- 43 -- 43 -- 43 -- 43 -- 43 --/0.55 -- -- -- -- -- -- -- 4/-- --/0.31 400V A -- 43 415V A -- 440V A -- -- -- -- -- -- -- -- 480V A -- -- -- -- -- -- -- -- 3/-- 500V A -- -- -- -- -- -- -- -- 3/0.27 -- 23 -- 23 -- -- 23 -- 23 -- 23 --/0.2 23 600V A -- -- 690V A 23 23 1 1000V, IEC 408. 2 Not available at time of printing, please consult factory. 3 AC15, according to IEC947-5-1. Load Figure 1 60 4/-- 2/-- IEC Technical Data Bussmann(R) for Non-Fusible Disconnect Switches BDNF175 - BDNF3150 IEC Catalog number 3 pole BDNF175 BDNF200A BDNF400 Rated voltage, Ue V/V 500/690 500/690 500/690 500/690 690 690 690 690 690 kA 100/50 100/50 100/50 100/50 45 45 45 50 50 A 400 400 8003 8003 -- -- -- -- -- kA 30 30 62 62 -- -- -- -- -- 35 35 80 80 105 105 115 115 115 Rated conditional short-circuit current Max. allowed fuse size, type OFAA Max. allowed cut-off current, peak value BDNF600A BDNF800A BDNF1200 BDNF1600 BDNF2000 BDNF3150 Rated short-circuit making capacity, prospective peak value, Icm kA RMS lcw 0.2s kA 17 17 38 38 100 100 110 110 110 RMS lcw 1.0s kA 8 8 17 17 505 505 505 505 505 Fusible Rated short time withstand current, AC breaking capacity pf = 0.35 415V A 1600 2000 5760 5780 6400 6400 6400 6400 6400 500V A 1600 2000 4800 4800 6400 6400 6400 6400 6400 690V A 1600 2000 2800 2800 25006 25006 48006 48007 48007 1000V1 A 1000 1000 1200 1200 -- -- -- -- -- DC breaking capacity/poles in series Capacitor ratings 48V A 1260/1 1260/1 -- -- -- -- -- -- -- 110V A 1260/1 1260/1 -- -- -- -- -- -- -- 220V A 1260/2 1260/2 1600/2 2000/2 1900/24 2600/24 2600/24 2600/24 2600/24 440V A 1260/1 1260 1600 2000 -- -- -- -- -- 750V A 1260/1 1260/4 -- -- -- -- -- -- -- 400/415V Rated capacitor duty kVar 90 110 300 350 2 2 2 2 2 kA 135 170 450 500 2 2 2 2 2 Physical characteristics Non-Fused L/R = 15ms, 3 pole in series current, pf = 0.65 operation cycles Mechanical endurance Weight Dimension 3 pole operations 1000 1000 1000 500 500 500 1008 1008 1008 16,000 16,000 10,000 10,000 10,000 10,000 6000 6000 6000 3 pole kg 3.0 3.0 6.2 6.2 16.3 17.5 37 37 37 4 pole kg 3.7 3.7 7.6 7.6 20.5 22.5 47 47 47 H mm Power loss per one pole 212 212 300 299 485 485 636 636 636 W mm 199 219 260 303 363 363 468 468 468 D mm 115.5 115.5 130 130 125 125 271 271 271 W Shaft size -- square 3.5 5.5 22 40 40 67 90 90 140 mm 8x8 8x8 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12 Nm 8.2 8.2 21 21 21 21 50 50 50 mm2 -- -- -- -- -- -- -- -- -- 8x25 10 x 30 12 x 40 12 x 40 12 x 60 12 x 60 12 x 60 12 x 60 12 x 60 BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ BDAUX_ _ VAC 690 690 690 690 690 690 690 690 690 A 10 10 10 10 10 10 10 10 10 A 8/-- 8/-- 8/-- 8/-- 8/-- 8/-- 8/-- 8/-- 8/-- --/1.1 Switch operating torque for rotary 3 pole switches Suitable conductor cross section Cu Bolt size Auxiliary contacts Enclosed Fused Electrical endurance at rated operational Rated voltage, Ui Thermal rated current, Ith AC12/DC12 Ie, A Ue = 1 2 3 4 5 6 7 8 120V 125V A --/1.1 --/1.1 --/1.1 --/1.1 --/1.1 --/1.1 --/1.1 --/1.1 240V A 6/-- 6/-- 6/-- 6/-- 6/-- 6/-- 6/-- 6/-- 6/-- 250V A --/0.55 --/0.55 --/0.55 --/0.55 --/0.55 --/0.55 --/0.55 --/0.55 --/0.55 400V A 4/-- 4/-- 4/-- 4/-- 4/-- 4/-- 4/-- 4/-- 4/-- 415V A 4/-- 4/-- 4/-- 4/-- 4/-- 4/-- 4/-- 4/-- 4/-- --/0.31 440V A --/0.31 --/0.31 --/0.31 --/0.31 --/0.31 --/0.31 --/0.31 --/0.31 480V A 3/-- 3/-- 3/-- 3/-- 3/-- 3/-- 3/-- 3/-- 3/-- 500V A 3/0.27 3/0.27 3/0.27 3/0.27 3/0.27 3/0.27 3/0.27 3/0.27 3/0.27 600V A --/0.2 --/0.2 --/0.2 --/0.2 --/0.2 --/0.2 --/0.2 --/0.2 --/0.2 690V A 2/-- 2/-- 2/-- 2/-- 2/-- 2/-- 2/-- 2/-- 2/-- 1000V, IEC 408. Not available at time of printing, please consult factory. Size 4. L/R = 2.5 mS. Maximum distance between busbar support and switch terminal 70mm. pf 0.95. pf 0.65. IEC 947-3, utilization category B, infrequent operation. Load Figure 1 61 Enclosed Non-Fused Ratings according to IEC 947-5-1 Approximate Dimensions Bussmann(R) for Non-Fusible Disconnect Switches CDNF16 -- CDNF100 CDNF16, CDNF25, CDNF32 -- base & DIN rail mounted switch 0.43 0.43 0.18 DIA. 11 4.5 0.20 11 5 0.47 12 1.38 2.36 2.13 Fusible 35 60 54 2.68 68 0.87 1.77 22 0.43 1.38 11 45 0.51 35 13 2.20 56 CDNF45, CDNF63 -- base & DIN rail mounted switch Non-Fused 0.69 0.18 DIA. 0.69 17.5 OT16,25,32 17.5 0.20 5 4.5 0.59 15 3.60 3.25 2.85 1.38 91.5 82.5 72.5 35 Enclosed Fused 2.76 1.71 70 43.5 0.43 11 2.89 2.07 52.5 73.5 0.69 17.5 CDNF30, CDNF60, CDNF100 -- base & DIN rail mounted switch Enclosed Non-Fused 0.18 DIA. 4.5 0.88 OT45,63 0.88 22.5 22.5 0.59 15 0.20 5 3.94 3.54 90 100 3.94 100 63 56 11 62 2.76 70 35 2.48 2.20 0.43 1.38 1.04 2.93 26.5 74.5 OT100E3 Approximate Dimensions Bussmann(R) for Non-Fusible Disconnect Switches CDNF16D -- CDNF100D CDNF16D, CDNF25D, CDNF32D -- door mounted switch 2.64 67 0.43 0.43 0.51 11 2.05 0.06 0.08 11 13 52 Fusible 1.5 2 2.13 54 0.88 22 0.43 1.38 11 MOUNTING HOLE DETAIL 0.51 35 13 1.69 43 1.89 48 0.69 2.72 0.69 17.5 69 1.42 17.5 Non-Fused OT 16 & 32ET CDNF45D, CDNF63D -- door mounted switch 0.69 17.5 36 0.71 0.71 18 18 0.16 D 4 0.71 18 0.71 0.88 D 22 2.85 1.42 1.89 36 72.5 48 MOUNTING HOLE DETAIL Enclosed Fused 18 2.56 65 2.07 0.43 11 52.5 0.69 17.5 OT63ET3 0.88 66.5 0.55 14 2.20 0.88 0.88 22.5 Enclosed Non-Fused CDNF30D, CDNF60D, CDNF100D -- door mounted switch 22.5 56 1.89 0.94 24 48 0.94 0.16 D 24 4 0.94 24 0.94 1.89 2.20 48 3.94 100 56 24 0.88 D 22 MOUNTING HOLE DETAIL 0.43 11 OT100ET3 2.76 70 1.04 26.5 63 Approximate Dimensions Bussmann(R) for Non-Fusible Disconnect Switches CDNF175A -- BDNF200A CDNF175A 3.64 92.5 0.98 25 2.76 70 0.49 12.5 Fusible 0.31 8 4.33 8.39 213 6.38 110 6.38 162 162 2.91 4.96 126 74 Non-Fused 0.06 1.5 0.43 1.81 11 46 4.33 6.14 7.95 (2 Pole) (3 Pole) (4 Pole) 5.91 7.72 9.53 (2 Pole) (3 Pole) (4 Pole) 110 156 150 196 0.16 DIA. 4 1.26 32 202 4.57 116 242 Enclosed Fused OETL-NF175 BDNF200A 3.64 92.5 0.98 25 2.76 70 0.49 12.5 0.31 Enclosed Non-Fused 8 4.33 8.39 213 110 6.38 162 2.91 6.38 162 4.96 126 74 0.06 1.5 2.20 56 4.72 6.93 9.13 (2 Pole) (3 Pole) (4 Pole) 6.30 8.50 10.71 (2 Pole) (3 Pole) (4 Pole) 120 160 176 216 0.43 11 4 1.26 32 232 4.57 116 272 OETL-NF200A 64 0.16 DIA. Approximate Dimensions Bussmann(R) for Non-Fusible Disconnect Switches BDNF400 1.54 39 1.58 40 0.63 16 0.28 DIA. 7 0.47 12.05 5.91 306 150 Fusible 12 14.49 6.77 8.78 368 223 172 4.06 103 5.16 7.91 131 4.33 15 110 5.12 10.67 201 Non-Fused 0.59 70 7 5 45 2.76 0.28 0.20 1.77 0.53 DIA. 13.5 130 271 (2 Pole) (3 Pole) (4 Pole) 7.48 190 10.24 12.99 260 330 Enclosed Fused (2 Pole) (3 Pole) (4 Pole) OETL-NF400 BDNF600A 1.65 42 1.58 0.62 40 16 0.28 DIA. 7 0.47 12 Enclosed Non-Fused 11.93 303 5.91 150 8.54 217 6.77 172 4.06 103 0.53 DIA. 13.5 0.31 8 3.50 89 1.93 49 5.85 148.5 (2 Pole) 8.19 208 (2 Pole) 9.35 237.5 (3 Pole) 11.69 297 (3 Pole) 12.85 326.5 (4 Pole) 1.77 45 0.20 5 5.12 130 15.19 386 (4 Pole) OETL-NF600A 65 Approximate Dimensions Bussmann(R) for Non-Fusible Disconnect Switches BDNF800A -- BDNF1200 BDNF800A 5.75 10.47 146 5.04 266 128 1.10 1.97 28 50 0.55 14 Fusible 0.35 DIA. 9 0.59 15 0.47 12 19.21 14.65 488 372 7.48 8.35 190 212 3.74 95 Non-Fused 1.56 39.5 0.94 0.79 3.54 24 8.07 2.07 52.5 205 11.61 295 0.47 20 90 40 15.16 4.92 385 125 (2 Pole) (3 Pole) (4 Pole) 10.71 272 14.25 362 12 1.57 17.80 452 (2 Pole) (3 Pole) (4 Pole) Enclosed Fused OETL-NF800A BDNF1200 5.75 10.47 5.20 266 146 132 1.10 1.97 28 50 0.55 14 Enclosed Non-Fused 0.35 DIA. 9 0.59 15 0.47 12 19.21 14.65 488 372 7.48 8.35 190 212 3.74 95 1.56 39.5 3.54 90 0.94 24 8.19 208 11.73 298 0.79 272 14.25 362 15.27 388 17.80 452 (2 Pole) (3 Pole) (4 Pole) 66 16 1.57 (2 Pole) (3 Pole) (4 Pole) 10.71 0.63 20 OETL-NF1200 40 4.92 125 Approximate Dimensions Bussmann(R) for Non-Fusible Disconnect Switches BDNF1600 -- BDNF3150 BDNF1600 0.55 DIA. 14 3.94 0.47 DIA. 12 100 50 1.28 0.79 32.5 20 Fusible 1.97 1.38 1.58 35 0.35 DIA. 9 40 0.47 12 25.28 21.50 642 546 7.48 8.35 190 212 3.74 Non-Fused 95 5.47 4.41 139 24 10.12 15.59 257 2-pole 12.63 321 2-pole 396 3-pole 18.11 460 3-pole 0.59 112 21.06 535 4-pole 15 10.67 271 23.58 599 4-pole BDNF2000 - BDNF3150 Enclosed Fused 0.94 OETL-NF1600 0.55 DIA. 14 3.94 0.47 DIA. 12 100 1.97 50 1.28 0.79 32.5 20 35 Enclosed Non-Fused 1.38 1.58 0.35 DIA. 9 40 0.47 12 25.28 21.50 642 546 7.48 190 8.35 212 3.74 95 5.47 4.41 139 0.94 24 10.12 257 2-pole 12.63 321 2-pole 15.59 396 3-pole 18.11 460 3-pole 0.59 112 21.06 535 4-pole 15 10.67 271 23.58 599 4-pole OETL-NF2000,3150 67 Approximate Dimensions Bussmann(R) for Terminal Lugs BDTL25 -- for use with 175A - 200A switches BDTL27 -- for use with 600A switches 2.40 1.56 61 39.5 1.00 25.5 1.12 28.5 Fusible 3.19 81 0.45 0.63 11.5 1.91 16 48.5 0.87 22 0.43 11 0.41 C.L. 10.5 0.125 3.1 0.53 0.26 C.L. 0.13 2.00 0.43 3.3 13.5 51 6.5 11 OZXA-25 OZXA-27 Non-Fused BDTL175 -- for use with 175A - 200A switches BDTL30 -- for use with 800A switches 3.00 1.57 1.00 76 40 25.5 1.12 28.5 0.45 Enclosed Fused 11.5 1.91 48.5 4.92 125 1.38 0.41 0.43 11 35 10.5 C.L. 0.125 3.1 0.26 6.5 0.41 C.L. 10.3 Enclosed Non-Fused OZXA-175 0.75 0.37 19 9.5 OZXA-30 BDTL28 & BDTL28/2 -- for use with 1200A - 3150A switches BDTL26 -- for use with 400A switches 2.47 3.00 63 39.5 38 3.19 81 76 1.56 1.50 4.92 0.63 125 16 0.87 22 1.38 35 0.53 13.5 C.L. 0.13 3.3 0.43 11 0.41 10.3 OZXA-26 68 C.L. 0.37 9.5 OZXA-28 0.75 19