VECTRON INTERNATIONAL OCXO C4600A1-0080 Nominal frequency (f0) 10 MHz Frequency stabilities Parameter vs. operating temp. range (df/f@25 C) Parameter Frequency stability Operating temp. range -15 to 15 ppb -10 to 10 ppb -40 ... 70 C -20 ... 70 C Value Condition initial tolerance (df/f0) -95 to 95 ppb @Vc = 2.5 V; 25 C vs. supply voltage change (df/f) -1 to 1 ppb static; 5 V 5 % vs. load change (df/f) -1 to 1 ppb static; Load 10 % vs. aging / daily (df/f) < 0.5 ppb after 30 days ; @ 25 C vs. aging / month (df/f) < 20 ppb after 30 days ; @ 25 C vs. aging / year (df/f) < 50 ppb after 30 days ; @ 25 C vs. aging / 10 years (df/f) < 0.4 ppm after 30 days ; @ 25 C 200ppb within 90 days after shipment with Vc=2.5V @ 15 min. warm up time ref. to exactly 10MHz Frequency tuning Parameter Value Condition -1 to -0.5 ppm 0.5 to 1 ppm < 10 % > 100 kOhm > 1000 Hz ext. tuning voltage @ 0 V ext. tuning voltage @ 5 V Parameter Value Condition Signal Load Fan out Rise Time Fall Time Duty cycle V Low V High HCMOS 50 pF 10 % 10 < 10 ns < 10 ns 40 / 60 % x < 0.3 V x > 4.5 V Electrical frequency control (EFC) (df/f0) Linearity Frequency control input impedance Modulation bandwidth @ -3 dB RF output @ 0.5 to 4.5 V @ 4.5 to 0.5 V @ 2.5 V Supply voltage Parameter Value Condition Supply voltage (Vs) 5V5% Current consumption steady state < 250 mA Current consumption during warm up < 600 mA after 48h oper. +Vc=2.5V Retrace after 24h power off and 1hour power on: 10ppb @ Vsnom & 25 C @ Vs Reference Voltage output Parameter Reference Voltage Value Condition 4V 5% Additional Parameters Parameter Phase Noise Value < -80 dBc/Hz < -120 dBc/Hz < -140 dBc/Hz < -145 dBc/Hz < -150 dBc/Hz < 50.0 E-12 < 15 min Short term stability Warm-up time Additional information warm up time: within 10ppb refer. to freq. after 1 hour power on Processing & Packing handling&processing note Vectron International * Product Specifications Vectron International GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany 49-07268-801-0 tel 49-07268-801-281 fax www.vectron.com Condition 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz max values 1 sec @ 25 C to final frequency modified 2008-07-23 Index : 14 printed 2008-08-20 * page 1 of 4 VECTRON INTERNATIONAL OCXO C4600A1-0080 Additional environmental conditions Vibration stationary: 9..200Hz, 2m/s, sinusoidal, time of occurence: 1% non station. vibrat. incl. shock: 250m/s^2 (storage: 100m/s^2), 6ms Shock storage + transp.: 250m/s^2 storage: free fall 1m on hardwood plate, steady state acceler. 20m/s^2 Damp heat operation: -40..+75C, 5..95% RH, absol. humid.: 1..29g/cubic meter air pressure: 70..106kPa Tensile strength of leads DIN IEC 68-2-21, Test Ua1 Flexibility of leads DIN IEC 68-2-21, Test Ub Sealing test A hermetisch dicht (hermetically sealed) Solderability DIN IEC 68-2-20, Test Ta 100% RoHS compliant Solvent resistance DIN IEC 68-2-45, Test xA Absolute Maximum Ratings Parameter Min Supply voltage (Vs) Operable temperature range Storage temperature range -0.5 -40 -55 Vectron International * Product Specifications Vectron International GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany 49-07268-801-0 tel 49-07268-801-281 fax www.vectron.com Typ Max Units 7 85 105 V C C modified 2008-07-23 Index : 14 Condition printed 2008-08-20 * page 2 of 4 VECTRON INTERNATIONAL OCXO C4600A1-0080 Enclosure Type G157B Height 18.2 mm all units in mm Pin Connections Pin 1: Vc (control voltage) Pin 2: Vref (reference voltage) Pin 3: Vs (supply voltage) Pin 4: RF-Output Pin 5: GND(Case) Marking C4600A1-0080 10,000 MHz Ser.Nr. AYYWW * * pin-1 marking Vectron International * Product Specifications Vectron International GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany 49-07268-801-0 tel 49-07268-801-281 fax www.vectron.com modified 2008-07-23 Index : 14 printed 2008-08-20 * page 3 of 4 VECTRON INTERNATIONAL C4600A1-0080 OCXO Standard shipping method 10 * 3 array / 30 units per tray Notes: Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). Subject to technical modification. Vectron International * Product Specifications Vectron International GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany 49-07268-801-0 tel 49-07268-801-281 fax www.vectron.com modified 2008-07-23 Index : 14 printed 2008-08-20 * page 4 of 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vectron: C4600A1-0080