UL (60950-1) reinforced insulation compliant Load current 10 to 40A Small Tab Terminal SSR Slim heat sink combined type AQ-J AQ-J RELAYS FEATURES TYPICAL APPLICATIONS 1. Compact Size W 28 x L 38 x H 30 mm W 1.102 x L 1.496 x H 1.181 inch 2. Built-in varistor 3. Reverse input connection prevention function 4. Labor Saving (tab terminal) 5. Heat sink combined types ready to mount on DIN rail added (Radiating grease and screws assembly process not needed) 6. Output arrangement 1a and 1a x 2 available in the heat sink combined type 1. Kitchen appliances 2. Vending machine 3. Injection molding machine 4. Packing machine 5. Amusement machine Note: * International standards are acquired for AQ-J SSR stand-alone, not applied to heat sink combined type. RoHS compliant ORDERING INFORMATION AQJ Output type 1: 10A, 75V to 264V AC 2: 15A, 75V to 264V AC 4: 25A, 75V to 264V AC Terminal, Type 1: Tab terminal, Zero-cross 2: Tab terminal, Random* Input voltage 2: 4 to 6 V DC 6: 18 to 28 V DC 9: 10 to 18 V DC Functions V: Built-in varistor Slim heat sink combined type None: Without a heat sink Y: 1a type W: 1a x 2 type Note: * Random type is available by custom order. TYPES 1. AQ-J Solid State Relays Type Load current Load voltage 10A Zero-cross* 15A 75V to 264V AC 25A Input voltage 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC Part No. AQJ112V AQJ119V AQJ116V AQJ212V AQJ219V AQJ216V AQJ412V AQJ419V AQJ416V Standard Packing; carton: 10 pcs., case: 200 pcs. Note: * Random type also available. Please inquire. ASCTB216E 201201-T1 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ AQ-J 2. AQ-J Slim Heat Sink Combined Type Output configuration Type Load current Load voltage Input voltage 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC Part No. AQJ112VY AQJ119VY AQJ116VY AQJ412VY AQJ419VY AQJ416VY 10A (per 1a) 4 to 6V DC 10 to 18V DC 18 to 28V DC AQJ112VW AQJ119VW AQJ116VW 15A (per 1a) 4 to 6V DC 10 to 18V DC 18 to 28V DC AQJ412VW AQJ419VW AQJ416VW 10A 1a 20A Zero-cross* 75V to 264V AC 1a x 2 Standard Packing; no carton, case: 10 pcs. Note: * Random type also available. Please inquire. 3. Accessories Type Slim heat sink (28mm wide) (Mountable on a DIN rail) Slim heat sink (45mm wide) (Mountable on a DIN rail) Standard heat sink (10A and 15A) Standard heat sink (25A only) DIN rail mounting plate Part No. AQP-HS-SJ10A AQP-HS-SJ20A AQP-HS-J10A AQP-HS-J25A AQP-DPJ Packaged quantity No carton, 10 in a case No carton, 8 in a case 5 in a carton, 20 in a case No carton, 5 in a case No carton, 50 in a case RATING 1. Ratings (Test sample: AQ-J stand-alone, Measurement condition: at 20C 68F, input ripple: 1% or less) 1) Input side Part No. Item Rated voltage Input voltage Input impedance Drop-out voltage AQJ112V AQJ212V AQJ412V AQJ119V AQJ219V AQJ419V 5V DC 4 to 6V DC Approx. 0.26k 12V DC 10 to 18V DC Approx. 0.8k Min. 1V DC AQJ116V AQJ216V AQJ416V 24V DC 18 to 28V DC Approx. 1.6k Note: Refer to REFERENCE DATA "3. Input current vs. input voltage characteristics". 2) Output side Part No. Item Max. load current*1 Load voltage Frequency Non-repetitive surge current "OFF-state" leakage current "ON-state" voltage drop Min. load current*2 AQJ112V AQJ119V AQJ116V 10A 100A AQJ212V AQJ219V AQJ216V 15A 75 to 264V AC 45Hz to 65Hz 150A Max. 5mA Max. 1.6V 50mA AQJ412V AQJ419V AQJ416V 25A 250A Notes: *1. Refer to REFERENCE DATA "1. Load current vs. ambient temperature". *2. When the load current is less than the rated minimum load current, please refer to "Cautions for Use". 2. Ratings (Test sample: AQ-J slim heat sink combined type, Measurement condition: at 20C 68F, input ripple: 1 % or less) 1) Input side Part No. Item Rated voltage Input voltage Input impedance Drop-out voltage AQJ112V(Y*W) AQJ412V(Y*W) AQJ119V(Y*W) AQJ419V(Y*W) AQJ116V(Y*W) AQJ416V(Y*W) 5V DC 4 to 6V DC Approx. 0.26k 12V DC 10 to 18V DC Approx. 0.8k Min. 1V DC 24V DC 18 to 28V DC Approx. 1.6k Note: Refer to REFERENCE DATA "3. Input current vs. input voltage characteristics". Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB216E 201201-T1 AQ-J 2) Output side Part No. Item Output arrangement Max. load current*1 Load voltage Frequency Non-repetitive surge current*2 "OFF-state" leakage current "ON-state" voltage drop Min. load current*3 AQJ112VY AQJ119VY AQJ116VY AQJ412VY AQJ419VY AQJ416VY AQJ112VW AQJ119VW AQJ116VW 20A 10A 15A 100A 250A AQJ412VW AQJ419VW AQJ416VW 1a x 2 1a 10A 75 to 264V AC 45Hz to 65Hz 100A 250A Max. 5mA Max. 1.6V 50mA Notes: *1. Refer to REFERENCE DATA "3. Input current vs. input voltage characteristics". *2. Refer to REFERENCE DATA "1. Load current vs. ambient temperature". *3. When the load current is less than the rated minimum load current, please refer to "Cautions for Use". 3. Characteristics (Measurement condition: at 20C 68F, input ripple: 1% or less) Item Characteristics Max. 1/2 cycle of voltage sine wave + 1ms Max. 1/2 cycle of voltage sine wave + 1ms Min. 100M between input, output and case 3,000 Vrms between input and output 2,500 Vrms between input, output and case SSR stand-alone: 10 to 55Hz, double amplitude of 1.5mm Slim heat sink combined type: 10 to 55Hz, double amplitude of 0.75mm Operate time Release time Insulation resistance Breakdown voltage Vibration resistance Remarks at 500 V DC for 1min. X, Y, Z axes SSR stand-alone: Min. 980m/s2 Slim heat sink combined type: Min. 197m/s2 -30 to +80C -22 to +176F -30 to +100C -22 to +212F Zero-cross (Turn ON and Turn OFF) Shock resistance Ambient temperature Storage temperature Operational method X, Y, Z axes Non-condensing at low temperatures REFERENCE DATA (1) AQ-J Solid State Relays 1. Load current vs. ambient temperature Use load current within range specified in the figure below (1) 10 A type (when using heat sink or iron plate) 12 10 (2)-1. 15 A type (when using iron plate) 18 When a single unit is mounted on an (A) slim heat sink When a single unit is mounted on an (B) slim heat sink 15 Load current, A When two units are mounted on an (A) slim heat sink 8 When a single unit is mounted on an (C) standard heat sink When two units are mounted 6 on an (B) slim heat sink When using 100x100xt1.6 mm iron plate Load current, A Tested condition: 1) If attached to a heat sink, use a heat conductive compound of similar coating to improve cooling 2) Without external heat sink If the mounting surface is not metallic and a heat sink is not used, expose the bottom surface and plate surface to improve heat dissipation. 3) The current value is per 1a. 4 AQP-HS-SJ20A AQP-HS-SJ10A AQP-HS-J10A AQP-DPJ AQP-HS-J25A (2)-2. 15 A type (when using a heat sink) 0 0 25 15 10 When two units are mounted on an (A) slim heat sink When two units are mounted on an (B) slim heat sink 20 When using 250 x 250 x t2 mm iron plate When using 200 x 200 x t2 mm iron plate 15 10 40 60 80 Ambient temperature, C When using 150 x 150 x t1.6 mm iron plate 5 ASCTB216E 201201-T1 100 Panasonic Corporation When using 150 x 150 x t1.6 mm iron plate 0 -20 100 When using 100 x 100 x t1.6 mm iron plate 0 -20 0 20 40 60 80 Ambient temperature, C Automation Controls Business Unit 0 20 40 60 80 Ambient temperature, C (3)-2. 25 A type (when using a heat sink) 30 20 When using as stand-alone When using an (D) DIN rail mounting plate 0 40 60 80 Ambient temperature, C When using 300 x 300 x t2 mm iron plate 5 0 20 30 When a single unit is mounted When a single unit is mounted on an on an (C) standard heat sink When a single unit is mounted (A) slim heat sink on an (B) slim heat sink When using 9 100 x 100 x t1.6 mm iron plate 3 (3)-1. 25 A type (when using iron plate) Load current, A Load current, A 20 2 12 6 When using as stand-alone When using an (D) DIN rail mounting plate 25 Load current, A (A) slim heat sink (B) slim heat sink (C) standard heat sink (D) DIN rail mounting plate (E) standard heat sink When using 200 x 200 x t2 mm iron plate When a single unit is mounted on an (E) standard heat sink When a single unit is mounted on an (A) slim heat sink 20 15 10 5 When a single unit is mounted on an (C) standard heat sink When a single unit is mounted on an (B) slim heat sink When two units are mounted on an (A) slim heat sink When two units are mounted on an (B) slim heat sink When using as stand-alone When using an (D) DIN rail mounting plate 0 0 20 40 60 80 Ambient temperature, C industrial.panasonic.com/ac/e/ 100 AQ-J 2. Non-repetitive surge current vs. carrying time 3. Input current vs. input voltage characteristics (10A, 15A and 25A common) 30 (4 to 6V DC) 25 Input current, mA Non-repetitive surge current, A 300 25A type 200 15A type 10A type 100 (10 to 18V DC) 20 (18 to 28V DC) 15 10 5 0 1 10 No. of cycles at 60 Hz 100 0 5 10 15 20 25 Input voltage, V 30 35 (2) AQ-J Slim Heat Sink Combined Type 1. Load current vs. ambient temperature characteristics Use load current within range specified in the figure below (1) Output arrangement: 1a (2) Output arrangement: 1a x 2 Load current, A 20 Load current, A (Per 1a) 20 25 AQJ41VY 15 10 15 AQJ41VW 10 AQJ11VW AQJ11VY 5 5 0 0 20 40 60 80 Ambient temperature, C 0 100 2. Surge current vs. carrying time characteristics 0 20 40 60 80 Ambient temperature, C 100 Note: When two contacts are operated simultaneously. In the case of a single-contact operation, the rating of (1) AQJ11VY, AQJ41VY applies. 3. Input current vs. input voltage characteristics 500 30 400 24 AQJ12V Input current, mA Surge current, A AQJ19V 300 200 AQJ16V 18 12 AQJ41V 100 6 AQJ11V 0 1 10 No. of cycles at 60 Hz Panasonic Corporation 100 0 0 5 10 15 20 Input voltage, V Automation Controls Business Unit 25 30 industrial.panasonic.com/ac/e/ ASCTB216E 201201-T1 AQ-J DIMENSIONS (mm inch) The CAD data of the products with a 1. AQ-J Stand Alone CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions CAD Data Schematic 30 max. 7.95 1.181 max. .313 4.55 .179 4.3 .169 Input power source 3 1 4 2 + - Load power source Load 8.4 6.35 .331 .250 38 1.496 4.3 dia. .169 dia. 2-1.65 dia. 2-.065 dia. 30 1.181 Mounting dimensions 2-1.2 dia. 2-.047 dia. 5.5 2.8 .217 .110 1.6 .063 28 1.102 30 +0.2 -0.1 1.181 +.008 -.004 7.1 .280 2-4.3 dia. or M4 2-.169 dia. or M4 Output side 1 and 2 terminals: #250 type, t = 0.8 .031 Input side 3 and 4 terminals: #110 type, t = 0.5 .020 17 .669 5 .197 2.-(1) AQ-J Slim Heat Sink Combined Type Output Arrangement: 1a External dimensions Schematic 100 3.937 90 3.543 78 3.071 CAD Data Input power source + - 6 .236 3 1 4 2 Load Load power source 28 1.102 4.6 dia. 4.6x5.6 elliptical hole .181x.220 .181 dia. Mounting dimensions (Top view) 83 3.268 2-4.6 dia. or M4 2-.181 dia. or M4 Max. 113 4.449 6 .236 100 3.937 1.6 .063 AQP810 Note: When using on a DIN rail, please install so that the "A" part is on top. 900.2 3.543.008 70707 "A" part 2.-(2) AQ-J Slim Heat Sink Combined Type Output Arrangement: 1a x 2 External dimensions 100 3.937 90 3.543 78 3.071 CAD Data 6 .236 28 1.102 4.6 dia. 4.6x5.6 elliptical hole .181 dia. .181x.220 Schematic Input power source + - 3 1 4 2 Load Load power source Note: Use caution for AQ-J terminal numbers. Mounting dimensions (Top view) 83 3.268 Max. 113 4.449 100 3.937 1.6 .063 Note: When using on a DIN rail, please install so that the "A" part is on top. ASCTB216E 201201-T1 Panasonic Corporation AQP810 2-4.6 dia. or M4 2-.181 dia. or M4 6 .236 900.2 3.543.008 70707 "A" part Automation Controls Business Unit industrial.panasonic.com/ac/e/ AQ-J ACCESSORIES (mm inch) AQP-HS-SJ10A Slim Heat Sink External dimensions CAD Data 100 3.937 90 3.543 78 3.071 30 1.181 4.6 dia. .181 dia. Mounting dimensions (Top view) 2-4.6 dia. or M4 2-.181 dia. or M4 5-M4 (Effective screw depth: 6mm .236inch) 6 .236 6 .236 4.6x5.6 elliptical hole 28 .181x.220 1.102 30 30 1.181 10 1.181 .394 900.2 3.543.008 78 3.071 83 3.268 1.6 .063 AQP810 70707 "A" part Note: When using on a DIN rail, please install so that the "A" part is on top. AQP-HS-SJ20A Slim Heat Sink External dimensions CAD Data 100 90 78 40 3.937 3.543 3.071 1.575 Mounting dimensions (Top view) 2-4.6 dia. or M4 2-.181 dia. or M4 5-M4 (Effective screw depth: 6mm .236inch) 6 .236 30 6 .236 1.181 4.6 dia. .181 dia. 47.6 1.874 30 1.181 900.2 3.543.008 4.6x5.6 elliptical hole .181x.220 45 1.772 78 3.071 83 3.268 1.6 .063 Note: When using on a DIN rail, please install so that the "A" part is on top. AQP-HS-J10A Standard Heat Sink (for 10A and 15A types) CAD Data 4.4 .173 AQP812 70707 "A" part External dimensions 50 1.969 4.4 .173 R2.2 R.087 Mounting dimensions 4-M4 or 4.4 dia. 4-M4 or .173 dia. 2 .079 1.5 .059 3-M4 33.3 80 100+0.5 -1.5 1.311 3.150 3.937 +.020 -.059 54 2.126 90 3.543 900.1 3.543.004 11.1 .437 2 .079 30 1.181 47.6 1.874 100 3.937 Panasonic Corporation 9 .354 Automation Controls Business Unit 24.5 .965 28.5 1.122 45 1.772 1.5 .059 industrial.panasonic.com/ac/e/ 500.2 1.969.008 ASCTB216E 201201-T1 AQ-J AQP-HS-J25A Standard Heat Sink (for 25A type) External dimensions CAD Data Mounting dimensions 4-R2.5 .098 3- 4-M4.5 or 5 dia. 4-M4.5 or .197 dia. M 4 5 .197 119 4.685 47.5 150 1.870 5.906 30 1.181 1190.1 4.685.004 132 5.197 1320.1 5.197.004 2 .079 7 .276 52 2.047 3 .118 46 1.811 64 2.520 82 3.228 100 3.937 120 4.724 142 5.591 13 .512 AQP-DPJ DIN Rail Mounting Plate External dimensions CAD Data 4.6 dia. .181 dia. 1.6 .063 3-M4 47.6 1.874 30 90 3.543 1.181 19 .748 4.6x5.6 elliptical hole .181x.220 12.1 .476 16.5 .650 AT8-DLA1 Mounting rail 100 3.937 6 15 .236 .591 ATA4806 Fastening plate CAD Data CAD Data 1,000 39.37 12 .472 5.5 .217 5 .197 15 10 15 .591 .394 .591 2.75R 15 10 15 .108R .591 .394 .591 40-5.5x15 slot 40-.217x.591 slot 35 1.378 24 1.5 5 .945 .059 .197 50 M4 1.969 27 1.063 10 .394 7.5 .295 ASCTB216E 201201-T1 Panasonic Corporation Automation Controls Business Unit UP ATA4806 industrial.panasonic.com/ac/e/ 10 .394 AQ-J NOTES 1. Part number indication The AQ-J slim heat sink combined type is a product combining the AQ-J SSR and AQ-J SSR heat sinks. The part numbers are indicated on each AQ-J SSR and heat sink. Ex) In the case of AQJ112VY Part number of AQ-J SSR: AQJ112V Part number of the heat sink: AQP810* When using these parts, please refer to REFERENCE DATA, "1. Load current vs. ambient temperature". Products Slim heat sink (28 mm) Slim heat sink (45 mm) Standard heat sink (10A and 15A) Standard heat sink (25A and 40A) Standard heat sink (AQ-A 25A) DIN Rail Mounting Plate (for AQ-A and AQ-J) Mounting Rail Terminal Cover (for AQ-A) Japanese Part No. AQP810 AQP812 AQP811 AQP808 AQP804 AQP809 ATA48011 AQA801 Global Part No. AQP-HS-SJ10A AQP-HS-SJ20A AQP-HS-J10A AQP-HS-J25A AQP-HS-30/40A AQP-DPJ AT8-DLA1 AQA801 Compatible models AQ-J AQ-A, AQ-J AQ-A, AQ-J AQ-A, AQ-J AQ-A AQ-A, AQ-J AQ-A, AQ-J AQ-A Note: * The Japanese part number is printed on the following accessories in stead of Global part number. Please refer to the below chart for interpretation from Japanese to Global part number. Recommended Temperature Controllers <KT4H Temperature Controller> Our temperature controller is recommended for use with our Solid State Relays. 48mm 1.890inch 56mm 2.205inch Features * Space saving requiring only a depth of 65 mm * Data collection possible through a PLC using RS485 communication * Tool port is standard for easy data setting * Inverted LCD + backlight for good legibility with large characters * Excellent operability and rich optional control functions Substitute part numbers 48mm 1.890inch Power supply 100 to 240 V AC Control output Non-contact voltage output Part No. AKT4H112100 * For detailed product information about temperature controllers, please refer to our website: http://industrial.panasonic.com/ac/e/ For Cautions for Use. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB216E 201201-T1 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: AQJ212V AQJ216V AQJ219V AQJ412V AQJ416V AQJ419V AQJ112V AQJ116V AQJ119V AQJ422V