GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 107
Electrical 1 x 105at 30 A 120 VAC Res. (N.O.)
Operate Time (max.) Max. 12 ms
Typical: 8 ms
Release Time (max.) Max. 5 ms
Typical: 3.5 ms
Dielectric Strength 2500 Vrms contact to coil
(at sea level for 1 min.) 1500 Vrms between open contacts
Insulation Resistance 100 megohms min. at 500 VDC, 20°C,
50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature
Operating -55°C (-67°F) to 100°C (212°F) Class B
-55°C (-67°F) to 125°C (257°F) Class F
Storage -55°C (-67°F) to 130°C (266°F) Class B
-55°C (-67°F) to 155°C (311°F) Class F
Vibration 0.062" DA at 10–55 Hz
Shock 20 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C. with quick-con
nect tabs, .250" wide, on top
Note: Allow suitable slack on leads when wiring,
do not subject the terminals to excessive force.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 43 grams
CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Ratings Resistive load:
Max. switched power: 900 W or 10000 VA
Max. switched current: 40 A (Form A) 30 A (Form B)
Max. switched voltage: 30 VDC or 300 VAC
UL Rating: See chart for UL contact ratings. AZ2100
Series meets UL 508 Group A spacing and UL 873
refrigeration and safety control requirements. AZ2101
Series meets UL 508 Group B spacing requirements.
VDE Rating:
AZ2100-1A - 25 A at 250 VAC, 10K cycles, resistive
AZ2100-1C - 20 A at 250 VAC, 10k cycles, resistive
Material Silver cadmium oxide
Resistance < 20 milliohms initially
(at rated current, voltage drop method)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Other coil resistances and sensitivities available upon request.
5. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage 500 mW
(typical)
Max. Continuous 2.2 W at 20°C (68°F) ambient
Dissipation 1.8 W at 40°C (104°F) ambient
Temperature Rise 38°C (68°F) at nominal coil voltage
Temperature Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
AZ2100
7/23/09
40A MINIATURE
POWER RELAY
FEATURES
•Versatility of both PC and “Trace-Saver” quick-connect ter-
minals on contacts
•40 Amp switching capability
•1 Form A, B and C contacts available
•DC coils to 120 VDC
•Life expectancy to 10 million operations
•Class B insulation for high temperature applications
•Class F (155°C) version available
•Available with an epoxy seal for automatic wave
soldering and immersion cleaning
•Proof Tracking Index (PTI/CTI) 175
•UL, CUR file E44211 including versions meeting UL 508
and UL 873 spacing and contact rating requirements; VDE
40023154 (some models)