Radial Leaded PTC 0ZRN Series 0ZRN Series RoHS 2 Compliant Application Wide variety of electronic equipment Product Features - Very Low resistance, Very High hold current, Solid state, Radial leaded product ideal for up to 16V and Operating temperatures up to 125. - AEC-Q Compliant - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Operating (Hold Current) Range 500mA - 15A Maximum Voltage Temperature Range 30VDC/16VDC -40 to 85 Agency Approval TUV (Std. EN60738-1-1, Cert. R50102187) UL Recognized Component (Std. UL1434, File E305051) UL Conditions of Acceptability: 1. These devices have been investigated for use in safety circuits and are suitable as a limiting device. 2. These devices have been calibrated to limit the current to 8 amps within 5 seconds, per ANSI/NFPA 70, "National Electrical Code". AEC-Q Compliant LEAD FREE = HALOGEN FREE = Electrical Characteristics (23) Part Number (Bulk) A B C D E F G H I J K L M N O P Q R S 0ZRN0050FF1E 0ZRN0070FF1E 0ZRN0100FF1E 0ZRN0200FF1E 0ZRN0300FF1E 0ZRN0400FF1E 0ZRN0450FF1E 0ZRN0550FF1E 0ZRN0600FF1A 0ZRN0650FF1A 0ZRN0700FF1A 0ZRN0750FF1A 0ZRN0800FF1A 0ZRN0900FF1A 0ZRN1000FF1A 0ZRN1100FF1A 0ZRN1300FF1A 0ZRN1400FF1A 0ZRN1500FF1A IH IT Imax Vmax Pd Rmin R1max Hold Current IH, A 0.5 0.7 1.0 2.0 3.0 4.0 4.5 5.5 6.0 6.5 7.0 7.5 8.0 9.0 10.0 11.0 13.0 14.0 15.0 Trip Current IT, A 0.9 1.4 1.8 3.8 6.0 7.0 7.8 10.0 10.8 12.0 13.0 13.1 15.0 16.5 18.5 20.0 24.0 27.0 28.0 Max Time to Trip @ 5xIH Seconds 2.5 3.2 5.2 3.0 5.0 5.0 3.0 6.0 5.0 5.5 7.0 7.0 8.0 10.0 9.0 11.0 13.0 13.0 20.0 Max Current Imax, A 40 40 40 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Voltage Vmax, Vdc 30 30 30 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 Typical Power Pd, W 0.9 1.4 1.4 1.4 3.0 3.3 3.6 3.5 4.1 4.3 4.0 4.5 4.2 5.0 5.3 5.5 6.9 6.9 7.0 Resistance Tolerance Rmin R1max Ohms Ohms 0.4800 1.1000 0.3000 0.8000 0.1800 0.4300 0.0450 0.1100 0.0330 0.0790 0.0240 0.0600 0.0220 0.0540 0.0150 0.0370 0.0130 0.0320 0.0110 0.0260 0.0100 0.0250 0.0094 0.0220 0.0080 0.0200 0.0074 0.0170 0.0062 0.0150 0.0055 0.0130 0.0041 0.0100 0.0030 0.0090 0.0032 0.0092 Agency Approvals Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Hold Current-maximum current at which the device will not trip in still air at 23. Trip current-minimum current at which the device will always trip in still air at 23. Maximum fault current device can withstand without damage at rated voltage (Vmax). Maximum voltage device can withstand without damage at its rated current. Typical power dissipated by device when in tripped state in 23 still air environment. Minimum device resistance at 23. Maximum device resistance at 23, 1 hour after initial device trip, or after being soldered to PCB in end application. Specifications subject to change without notice belfuse.com/circuit-protection Type 0ZRN Series 2/4 PTC's - Basic Theory of Operation / "Tripped" Resistance Explanation Fundamentally, a Bel PTC consists of a block of polymeric material containing conductive filler and bonded between two conductive, planar terminations. At currents below the device IHOLD rating, AND at temperatures below 100C, the PTC maintains a resistance value below its R1 MAX rating. As the device's temperature approaches 130C, either due to an increase in ambient temperature or a current exceeding its I TRIP rating, volumetric expansion of the filled polymer breaks apart the majority of conductive pathways across the terminals created by chain contact of adjacent filler particles or device resistance increases sharply by several orders of magnitude. At the much higher "Tripped" resistance, there is just enough leakage current to allow internal heating to "hold" the device in its tripped state (around 125C) until power is interrupted. Once power is removed, the PTC's core cools and contracts allowing conductive chains to reform and return the device to its low resistance state. The catalog data for each device specifies a "Typical Power" value. This is the power required to exactly match the heat lost by the tripped device to its ambient surroundings at 23C. By Ohm's Law, power can be stated as: W = E^2/R. Thus the approximate resistance of a "Tripped" PTC can be determined by: R = E^2/W, where "E" is the voltage appearing across the PTC (usually the supply's open circuit voltage), and "W" is the Typical Power value for the particular PTC. Since the PPTC acts to maintain a constant internal temperature, its apparent resistance will change based upon applied voltage and, to a lesser degree, ambient conditions. Consider the following example.... A PTC with a Typical Power of 1 watt protecting a circuit using a 60V supply will demonstrate an apparent, tripped resistance "R" of: R = 60^2/1 = 3,600 ohms This same tripped device when used to protect a 12V circuit would now present an apparent resistance of: R = 12^2/1 = 144 ohms The value for Typical Power is "typical" because any physical factors that affect heat loss (such as ambient temperature or air convection) will somewhat alter the level of power that the PTC needs to maintain its internal temperature. In short, PTCs do not exhibit a constant, quantifiable tripped resistance value. Type Time - To - Trip at 23 . Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection (c) 2019 Bel Fuse, Inc. Rev. 0ZRN Jan2019 Type 0ZRN Series 3/4 Physical Specifications Lead material: Matte tin plated copper, size / diameter as shown in Drawings and Table under Product Dimensions. Soldering charactcristics MIL-STD-202, Method 208H. Insulating coating Flame retardant epoxy, meets UL-94-V-0 requirements. PTC Marking "bel" or "b", , IH code and "RN" . Product Dimensions Thermal Derating Curve All dimensions in mm. Part Number Fig. 0ZRN0050FF 0ZRN0070FF 0ZRN0100FF 0ZRN0200FF 0ZRN0300FF 0ZRN0400FF 0ZRN0450FF 0ZRN0550FF 0ZRN0600FF 0ZRN0650FF 0ZRN0700FF 0ZRN0750FF 0ZRN0800FF 0ZRN0900FF 0ZRN1000FF 0ZRN1100FF 0ZRN1300FF 0ZRN1400FF 0ZRN1500FF 1 2 1 1 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 A Max 7.4 6.9 9.7 9.4 8.8 10.0 10.4 11.2 11.2 12.7 14.0 14.0 16.5 16.5 17.5 21.0 23.5 23.5 23.5 B Max 12.7 10.8 13.6 14.4 13.8 15.0 15.6 18.9 21.0 22.2 21.9 23.5 22.5 25.7 26.5 26.1 28.7 28.7 28.7 C Typical 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 10.2 10.2 10.2 10.2 10.2 D Min 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 E Max 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.6 3.6 3.6 F Typical 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.4 1.4 1.4 Cautionary Notes 1. Operation beyond the specified maximum ratings or improper use may result in damage and possible electrical arcing and/or flame. 2. These Polymer PTC (PPTC) devices are intended for protection against occasional overcurrent/ overtemperature fault conditions and may not be suitable for use in applications where repeated and/or prolonged fault conditions are anticipated. 3. Avoid contact of PTC device with chemical solvent. Prolonged contact may adversely impact the PTC performance. 4. These PTC devices may not be suitable for use in circuits with a large inductance, as the PTC trip can generate circuit voltage spikes above the PTC rated voltage. 5. These devices are intended for use in DC voltage applications only. Use in AC voltage applications should be first discussed with Bel Fuse engineering. 6. Not recommended for use on potted or conformal coated PCB's. Restriction of free air flow could affect electrical performance and/or result in device failure. Consult Bel Fuse engineering. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection (c) 2019 Bel Fuse, Inc. Rev. 0ZRN Jan2019 Type 0ZRN Series 4/4 Environmental Specifications Temperature cycling JESD22 Method JA-104 Biased humidity MIL-STD-202 Method 103 Operational life MIL-STD-202 Method 108 Terminal strength AEC-Q200-004 Resistance to solvents MIL-STD-202 Method 215 Mechanical shock MIL-STD-202 Method 213 Vibration MIL-STD-202 Method 204 Resistance to soldering heat MIL-STD-202 Method 210 Thermal shock MIL-STD-202 Method 107 Solderability ANSI/J-STD-002 Soldering Parameters Lead-free Wave Soldering Profile Wave Solder Parameter Average ramp-up rate 200 / second typical 1 - 2 / second Max 4 / second within 125 of soldering temperature Heating rate during preheat Final preheat temperature Peak temperature Tp 260 Time within +0 / -5 of actual peak temperature 10 seconds Ramp-down rate 5 / second max. Standard Packaging P/N Explanation and Ordering Information Bulk Reel/Tape Part Number Pcs/Box P/N Code Pcs/Reel P/N Code 0ZRN0050FF 0ZRN0400FF 3000 1E 2500 2D 0ZRN0450FF 0ZRN0550FF 3000 1E 1500 2B 0ZRN0600FF 1000 1A 1500 2B 0ZRN0650FF 0ZRN1500FF 1000 1A N/A N/A Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection (c) 2019 Bel Fuse, Inc. Rev. 0ZRN Jan2019