MEDER electronic KSK-1A66-... CHARACTERISTICS All dimensions in mm [inches] Glass length of 14 mm and diameter of 2.2 mm Normally open 1 Form A contact Excellent for most applications and long life expectancy CONTACT DATA DIMENSIONS Switch Model --> Contact For m --> All data at 20 0C Contact Ratings Conditions KSK-1A66-... For m A Min. T yp . Max. Units 10 W 200 V A Contact Rating * Any DC combination of V & A not to exceed their individual max.'s Switching Voltage D C or peak A C Switching Current D C or peak A C 0.5 Carry Current D C or peak A C 1.25 A Static Contact Resistance w/ 0.5V & 10mA 150 m Dynamic Contact Resistance Measured w/ 0.5V & 50mA 1.5 ms after closure 200 m Insulation Resistance across Contacts 100 Volts applied 1 0 10 Breakdown Voltage Voltage applied for 60 sec. min. 225 Operate Time, incl. Bounce Measured w/ 100% overdrive Release Time Measured w/ no coil suppression Capacitance @ 10kHz across contact VD C 0.5 ms 0.1 ms pF 0.2 Test Coil ** KMS-01 Standard AT range 10 60 AT 50 g Environmental Data Shock Resistance 1/2 sine wave duration 11ms Vibration Resistance From 10 - 2000 Hz Ambient Temperature 10 0C/ minute max. allowable Storage Temperature 10 C/ minute max. allowable Soldering Temperature 5 sec. dwell g 20 -20 0 -55 130 0 C 130 0 C 260 0 C Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * For life expectancy see our life test section located on page 151. ** See our test coil section located on page 157. ORDER INFORMATION Part Number Example - KSK - 1A66 - 1015 1015 is the AT range (Any AT can be ordered between 10 & 60 in a minimum range of 2 AT) SERIES CONTACT FORM SWITCH MODEL AT RANGE (between) KSK - 1A 66 - XXXX OPTIONS 10 60 www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 131