Rev. 1.0 November 2014 www.aosmd.com Page 1 of 7
AOZ8831-05
Ultra Low Capacitance One-line
Bi-directional TVS Diode
General Description
The AOZ8831-05 is an ultra low capacitance one-line
bi-directional transient voltage suppressor diode
designed to protect high speed data lines and voltage
sensitive electronics from high transient co nditions and
ESD.
This device incorporates one TVS
diode in an ultra-small
DFN 1.0 x 0.6 package.
It may be used to
meet the ESD
immunity requirements of IEC 61000-4-2, Level 4.
The AOZ8831-05 comes in an RoHS compliant DFN
package and is rated over a -40°C to +85°C ambient
temperature range.
The ultra-small 1 .0 x 0.6 x 0.4mm DFN p ackage makes it
ideal for applications where PCB space is a premium.
The small size and high ESD protection makes it ideal for
protecting voltage sensitive electronics from h igh tran-
sient conditions and ESD.
Features
ESD protection for high - spe e d da ta lines:
– Exceeds: IEC 61000-4-2 (ESD) ±20kV (air),
±20kV (contact)
– Human Body Model (HBM) ±15kV
Small package saves board space
Ultra low capacitance: 0.22pF
Low clamping voltage
Operating voltage: 5V
Pb-free device
Applications
Portable handheld devices
Notebook computers
Digital Cameras
Portable GPS
Typical Application Pin Configuration
Signal Line
1 2
Bidirection Protection of Single Line
AOZ8831-05
Rev. 1.0 November 2014 www.aosmd.com Page 2 of 7
Ordering Information
AOS Green Products use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/media/AOSGreenPolicy.pdf for additional information.
Absolute Maximum Ratings
Exceeding the Absolute Maximum ratings may damage th e device.
Notes:
1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330Ω.
2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5kΩ.
Maximum Operating Ratings
Part Number Ambient Temperature Rang e Package Environmental
AOZ8831DT-05 -40°C to +85°C DFN 1.0 x 0.6 Green Product
Parameter Rating
VP – VN 5.5V
Peak Pulse Current (IPP), tP = 8/20µs 6A
Peak Pulse Power (IEC61000-4-5 8/20µs current pulse) 90W
Storage Temperature (TS) -65°C to +150°C
ESD Rating per IEC61000-4-2, Contact(1) ±20kV
ESD Rating per IEC61000-4-2, Air(1) ±20kV
ESD Rating per Human Body Model(2) ±15kV
Parameter Rating
Junction Temperature (TJ) -40°C to +125°C
AOZ8831-05
Rev. 1.0 November 2014 www.aosmd.com Page 3 of 7
Electrical Characteristics
TA = 25°C unless otherwise specified.
Notes:
3. These specifications are guaranteed by design and characterization.
Symbol Parameter Diagram
IPP Maximum Reverse Peak Pulse Current(3)
(IEC61000-4-5 8/20µs pulse)
VCL Clamping Voltage @ IPP(3)
VRWM Working Peak Reverse Voltage
IRMaximum Reverse Leakage Current
VBR Breakdown Voltage
CJCapacitance @ VR = 0 and f = 1MHz
Device Device
Marking VRWM (V)
Max.
VBR (V) IR (µA)
Max.
VCL Max. CJ (pF)
Min. Max. IPP = 1 A IPP = 4 A IPP = 6 A Typ. Max.
AOZ8831DT-05 5 5.5 6 10 0.1 4 9.5 15 0.22 0.35
I
IPP
IR
IT
IPP
VCLVBR VRWM
VRWM
VBR VCL
V
AOZ8831-05
Rev. 1.0 November 2014 www.aosmd.com Page 4 of 7
Performance Characteristics
Clamping Voltage vs. Peak Pulse Current
(IEC 61000-4-5 8/20µs current pulse)
Typical Variations of CIN vs. VR
(f = 1MHz, T = 25
º
C)
16
14
12
10
8
6
4
2
01 53246
Peak Pulse Current, IPP (A)
Clamping Voltage, VCL (V)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0 1.0 4.02.0 3.0 5.0
Input Voltage (V)
Normalized Capacitance
AOZ8831-05
Rev. 1.0 November 2014 www.aosmd.com Page 5 of 7
Package Dimensions, DFN 1.0 x 0.6
0.55
UNIT: mm
Seating Plane
Notes:
1. All dimensions are in millimeters, angles are in degrees.
2. Coplanarity applies to the exposed heat sink slug as well as the terminals.
Symbols
A
A1
b
D
E
e
L
ccc
ddd
Dimensions in millimeters
RECOMMENDED LAND PATTERN
BOTTOM VIEW
SIDE VIEW
C
A
A1
0.125x45°
0.30
1.00
0.70
0.40
0.30
Min.
0.31
0.00
0.45
0.55
0.95
0.20
Nom.
0.38
0.02
0.50
0.60
1.00
0.65 BSC
0.25
0.03
0.10
Max.
0.40
0.05
0.55
0.65
1.05
0.30
Symbols
A
A1
b
D
E
e
L
ccc
ddd
Dimensions in inches
Min.
0.012
0.000
0.018
0.022
0.037
0.008
Nom.
0.015
0.001
0.020
0.024
0.039
0.026 BSC
0.010
0.001
0.004
Max.
0.016
0.002
0.022
0.026
0.041
0.012
D
Ee
dddO M CAB
dddO M CAB
2 x b
2 x L
Pin #1 ID
0.125x45°
AOZ8831-05
Rev. 1.0 November 2014 www.aosmd.com Page 6 of 7
Tape and Reel Dimensions, DFN 1.0 x 0.6
Carrier Tape
Reel
Leader / Trailer & Orientation
Tape Size
8mm
Reel Size
ø178
M
ø178
±0.5
N
ø55
±1
TVS
Unit Per Reel:
10000pcs
MOS
Unit Per Reel:
10000pcs
UNIT: mm
W
8.4
+1.5/-0
H
ø13.0
±0.5
W1
Max.
14.4
K
Max.
10.1
S
2.0
±0.5
G
N/A
R
N/A
V
N/A
R
G
V
W1
M
W
N
H
S
K
Package
DFN 1.0x0.6/
DFN 1.0x0.6A
(8 mm)
Option T
0.23
±0.02
P2
2.00
±0.05
B0
1.19
±0.05
A0
0.69
±0.05
K0
0.66
±0.05
D0
0.40
±0.05
D1
1.50
±0.10
E
8.00
+0.3/-0.1
E1
1.75
±0.10
E2
3.50
±0.05
P0
2.00
±0.05
P1
4.00
±0.10
UNIT: mm
T
B0
K0 D0
D1
P2
P0
E1
E
E2
A0
P1
A
DFN 1.0x0.6/
DFN 1.0x0.6A
(8 mm)
0.20
±0.05
2.00
±0.05
1.05
±0.04
0.65
±0.04
0.61
±0.04
0.40
±0.05
1.50
±0.10
8.00
+0.3/-0.1
1.75
±0.10
3.50
±0.05
2.00
±0.10
4.00
±0.10
B
Trailer Tape
300mm Min.
Components Tape
Orientation in Pocket
Leader Tape
500mm Min.
Trailer Tape
300mm Min.
Components Tape
Orientation in Pocket
Leader Tape
500mm Min.
AOZ8831-05
Rev. 1.0 November 2014 www.aosmd.com Page 7 of 7
Part Marking
Product Number Code Date Code
5
As used herein:
1. Life support de vice s or systems are devices or
systems which, (a) are intended for surgical implant into
the body or (b) support or sustain life, and (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labelin g, can be
reasonably ex pe cte d to res ult in a signific an t inju ry of
the user.
2. A critical component in any component of a li fe
support, device, or syste m whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
LEGAL DISCLAIMER
Alpha and Omega Semiconductor makes no representations or warranties with respect to the accuracy or
completeness of the information provided herein and takes no liabilities for the consequences of use of such
information or any product described he rein. Alpha and Omega Semico nductor rese rves the right to make changes
to such information at any time without further notice. This document does not constitute the grant of any intellectual
property rights or representation of non-infringement of any third party’s intellectual property rights.
LIFE SUPPORT POLICY
ALPHA AND OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS.
