CR-2/3AZ LITHIUM MANGANESE DIOXIDE Dimensions Features & Benefits +0 * Superior long term reliability 17 -1 mm * High current pulse discharge capability * Wide operating temperature (-40 to 70) * High safety and energy density (+) Specifications Capacity: 33.5 -1.5 mm 1600 mAh Typical Weight: +0 Nominal Voltage: 3V Approximately 17g (-) Long Term Discharge 100k (without wake-up pulse) Pulse Discharge Characteristics 3.5 60C 20C -10C 3.5 -30C 10 Temp: 20C VOLTAGE 3.0 8 2.5 6 2.0 4 VOLTAGE (V) VOLTAGE (V) 60 20 2.0 -10 1.5 -30 1.0 1.5 2 Pulse Condition: 300mA-1s Base Load: 300k 0.5 INTERNAL RESISTANCE 0 1.0 0 200 400 600 800 1000 1200 1400 1600 1800 0 0 500 1000 1500 2000 2500 DURATION (day) Estimated Data DEPTH OF DISCHARGE (mAh) DISCHARGE CURVES (1kohm) 3 Long Term Discharge 300k (without wake-up pulse) Discharge Curves (1kohm) ( 3.5 pp ) 3.5 10 Temp: 20C VOLTAGE 60C VOLTAGE (V) 2.5 -10C -30C 2.0 1.5 3.0 8 2.5 6 2.0 4 1.5 2 INTERNAL RESISTANCE 1.0 1.0 0 200 400 DURATION (hour) 600 800 0 0 500 1000 1500 2000 2500 DURATION (day) The data in this document is for descriptive purposes only and is not intended to make or imply any guarantee or warranty. For more information on how Panasonic can assist you with your battery power solution needs call 877-726-2228, visit www.panasonic.com/industrial/batteries-oem or e-mail oembatteries@us.panasonic.com 3000 3500 INTERNAL RESISTANCE () 20C 3.0 VOLTAGE (V) LITHIUMION/CR-2/3AZ/4.11V1 | Copyright (c) 2011 Panasonic Corporation of America. All Rights Reserved. 2.5 INTERNAL RESISTANCE () 3.0 CR-AG LITHIUM MANGANESE DIOXIDE Dimensions Features & Benefits +0 * Superior long term reliability 17 -1 mm * High current pulse discharge capability * Wide operating temperature (-40 to 70) * High safety and energy density (+) Specifications Capacity: 45.5 mm 2400 mAh Typical Nominal Voltage: 3V Weight: Approximately 22g (-) Long Term Discharge 30k (without wake-up pulse) Pulse Discharge Characteristics 3.5 60C 20C -10C 3.5 -30C 10 Temp: 20C VOLTAGE 60 20 VOLTAGE (V) -30 1.5 8 2.5 6 2.0 4 1.5 Pulse Condition: 300mA-1s Base Load: 300k 0.5 3.0 2 INTERNAL RESISTANCE 0 1.0 0 400 800 1200 1600 2000 2400 0 0 100 200 300 400 DEPTH OF DISCHARGE (mAh) 900 1000 1100 1200 1300 1400 DURATION (day) Long Term Discharge 300k (without wake-up pulse) Discharge Curves (1kohm) 3.5 3.5 60C 500 600 700 800 3.5 10 20C Temp: 20C VOLTAGE VOLTAGE (V) 2.5 -10C -30C 2.0 3.0 3.0 8 2.5 2.5 6 2.0 4 VOLTAGE (V) 3.0 2.0 1.5 1.5 1.5 2 INTERNAL RESISTANCE 1.0 1.0 0 100 200 300 400 500 600 DURATION (hour) 700 800 900 1000 1.0 0 0 0 500 1000 1500 2000 2500 3000 3500 DURATION (day) The data in this document is for descriptive purposes only and is not intended to make or imply any guarantee or warranty. For more information on how Panasonic can assist you with your battery power solution needs call 877-726-2228, visit www.panasonic.com/industrial/batteries-oem or e-mail oembatteries@us.panasonic.com 4000 4500 5000 INTERNAL RESISTANCE () VOLTAGE (V) -10 2.0 1.0 VOLTAGE (V) LITHIUMION/CR-AG/4.11V1 | Copyright (c) 2011 Panasonic Corporation of America. All Rights Reserved. 2.5 INTERNAL RESISTANCE () 3.0 Manganese Dioxide Lithium Cylindrical Batteries: Individual Specifications 2CR5 CR-P2 Dimensions(mm) Dimensions(mm) Weight:38.0g Weight:37.0g Specification Specification Nominal voltage (V) 6 Nominal capacity (mAh) Nominal voltage (V) 6 1,400 1,400 Nominal capacity (mAh) Continuous standard load (mA) 20 Continuous standard load (mA) 20 Operating temperature (C) -40 ~ +70 Operating temperature (C) -40 ~ +70* Temperature Characteristics Temperature Characteristics 7.0 7.0 Pulse pattern: 900mA 3sec ON-27sec OFF (one cycle) 6.0 60C Voltage (V) Voltage (V) 60C 5.0 20C -10C 4.0 -20C 3.0 2.0 1.0 Pulse pattern: 900mA 3sec ON-27sec OFF (one cycle) 6.0 5.0 20C -10C 4.0 -20C 3.0 2.0 0 400 800 1200 1600 2000 1.0 2400 Duration (cycle) 0 400 800 1200 1600 2000 2400 Duration (cycle) * Please consult Panasonic for use below and above -20C to +60C * Please consult Panasonic for use below and above -20C to +60C LITHIUM HANDBOOK AUGUST 2005 This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to modification without notice. Contact Panasonic for the latest information. Manganese Dioxide Lithium Cylindrical Batteries: Individual Specifications CR2 CR123A Dimensions(mm) Dimensions(mm) 1.2 +0.3 -0.2 17.0 +0 -0.6 0.7 0.2 34.2 +0.3 -0.4 + Weight:11.0g Specification Weight:17.0g Specification Nominal voltage (V) 3 Nominal capacity (mAh) Nominal voltage (V) 3 1,550 850 Nominal capacity (mAh) Continuous standard load (mA) 20 Continuous standard load (mA) 20 Operating temperature (C) -40 ~ +70* Operating temperature (C) -40 ~ +70* * Please consult Panasonic for use below and above -20C to +60C Temperature Characteristics Temperature Characteristics 3.5 3.5 Pulse pattern: 900mA 3sec ON-27sec OFF (one cycle) Pulse pattern: 900mA 3sec ON-27sec OFF (one cycle) 3.0 3.0 60C Voltage (V) Voltage (V) 60C 2.5 20C -10C 2.0 -20C 1.5 1.0 0.5 0 2.5 20C -10C 2.0 -20C 1.5 1.0 200 400 600 800 1000 Duration (cycle) 1200 1400 1600 0.5 0 400 800 1200 1600 2000 2400 Duration (cycle) * Please consult Panasonic for use below and above -20C to +60C * Please consult Panasonic for use below and above -20C to +60C LITHIUM HANDBOOK AUGUST 2005 This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to modification without notice. Contact Panasonic for the latest information. Manganese Dioxide Lithium Cylindrical Batteries: Individual Specifications CR-V3p Dimensions(mm) 20 52 +0.2 -0.4 12.5 14.1 14.40.2 28.40.2 Weight:39.0g Specification Nominal voltage (V) 3 Nominal capacity (mAh) 3,000 Continuous standard load (mA) 200 Operating temperature (C) -40 ~ +70* Discharge Characteristics of CR-V3p(2pc)and"AA" Alkaline Cell (LR6,4pcs) 1000mA Continuous Discharge 7.0 6.5 Voltage (V) 6.0 CR-V3 2 5.5 20C 5.0 4.5 20C 4.0 -10C LR6 4 3.5 -10C 3.0 0 30 60 90 120 150 180 210 Discharge Time(min) * Please consult Panasonic for use below and above -20C to +60C LITHIUM HANDBOOK AUGUST 2005 This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to modification without notice. Contact Panasonic for the latest information. Product Information Sheet Panasonic Batteries Panasonic Industrial Company A Division Panasonic Corporation of North America 5201 Tollview Drive, 1F-3 Rolling Meadows, IL 60008 Toll Free: 877-726-2228 Fax: 847-637-4660 Internet: www.panasonic.com/industrial/batteries-oem e-mail: oembatteries@panasonic.com Product: Manganese Dioxide (CR Type) Lithium Batteries Applicable models/sizes: All CR type cylindrical and coin batteries Revision: January 1, 2014 The batteries referenced herein are exempt articles and are not subject to the OSHA Hazard Communication Standard requirement. This sheet is provided as a service to our customers. MSDS Material Safety Data Sheets (MSDS) are a sub-requirement of the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard, 29 CFR Subpart 1910.1200. This Hazard Communication Standard does not apply to various subcategories including anything defined by OSHA as an "article". OSHA has defined "article" as a manufactured item other than a fluid or particle; (i) which is formed to a specific shape or design during manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii) which under normal conditions of use does not release more than very small quantities, e.g. minute or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to employees. Because all of our batteries are defined as "articles", they are exempt from the requirements of the Hazard Communication Standard; hence a MSDS is not required. The following components are found in a Panasonic Manganese Dioxide (CR) Lithium battery: Cylindrical Cell Components Positive Electrode Negative Electrode Electrolyte Coin Cell Components Positive Electrode Negative Electrode Electrolyte Material Manganese Dioxide Lithium Propylene Carbonate-Solvent 1,2 Dimethoxyethane-Solvent Lithium Triflate-Salt Material Manganese Dioxide Lithium Propylene Carbonate-Solvent 1,2 Dimethoxyethane-Solvent Lithium Perchlorate-Salt Formula MnO2 Li C4H6O3 C4H10O2 CF3SO3Li Formula MnO2 Li C4H6O3 C4H10O2 LiClO4 CAS # 1313-13-9 7439-93-2 108-32-7 110-71-4 33454-82-9 1313-13-9 7439-93-2 108-32-7 110-71-4 7791-03-9 Lithium Triflate is Lithium Trifluoromethanesulfonate. DISPOSAL Lithium batteries are neither specifically listed nor exempted from the Federal Environmental Protection Agency (EPA) hazardous waste regulations as promulgated by the Resource Conservation and Recovery Act (RCRA). The only metal of possible concern in a lithium battery is lithium that is not a listed or characteristic toxic hazardous waste. Waste lithium batteries can be considered a reactive hazardous waste if there is a significant amount of unreacted, or unconsumed lithium remaining in the spent battery. The key to disposing of a lithium battery as a non-hazardous waste is to guarantee that it is fully or mostly discharged. Once it is discharged it can be disposed of as non-hazardous waste. You can dispose of a fully charged or partially discharged lithium battery as a hazardous waste after they are first neutralized through an approved secondary treatment. The need for a secondary treatment prior to disposal is a requirement of the U.S. Land Ban Restrictions of the Hazardous and Solid Waste Amendments of 1984. A secondary treatment center can only receive these batteries as manifested hazardous waste. The waste code for charged lithium Notice: The information and recommendations set forth are made in good faith and are believed to be accurate at the date of preparation. Panasonic Industrial Company makes no warranty expressed or implied. 004-14 Page 1 of 2 batteries is D003, reactive. In either case, button cell batteries contain so little lithium that they never qualify as a reactive hazardous waste. These batteries are safe for disposal in the normal municipal waste stream. Disposal of large quantities of undischarged lithium batteries should be performed by permitted, professional disposal firms knowledgeable in Federal, State and local hazardous materials and hazardous waste transportation and disposal requirements. As always, households are exempt from the RCRA hazardous waste guidelines. In California, packages that contain CR lithium coin cells and the Owners/Operating Instructions of products that contain CR lithium coin cells must include the following statement: "Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchorate". The effective date for this Perchlorate label was July 1, 2006 for non-consumer products and January 1, 2007 for consumer products. TRANSPORTATION All Panasonic lithium batteries are not subject to the requirements of the Department of Transportation (DOT) Subchapter C, Hazardous Materials Regulations if shipped in compliance with 49 CFR 173.185 and Special Provision 188. Effective January 1, 2014 all Panasonic lithium batteries can be shipped by air in accordance with International Civil Aviation Organization (ICAO), 2013-2014 edition, Section II or Section 1B or International Air Transport Association (IATA) 55th edition, Section II or Section 1B Packing Instructions (PI) 968 (Batteries), PI 969 (Batteries, packed with equipment) and PI 970 (Batteries, contained in equipment) as appropriate th All Panasonic lithium batteries are regulated by the International Maritime Organization (IMO), 2012, 36 amendment, under Special Provisions 188 and 230. All Panasonic lithium cells are tested and comply with the UN Model Regulations, Manual of Test and Criteria, Part III, subsection 38.3.. If you build any of our lithium cells into a battery pack, you must also assure that they are tested in accordance with th the UN Model Regulations, Manual of Test and Criteria. Part III, subsection 38.3, 5 revised edition, Amendment 1. The DOT requires that the outside of each package that contains lithium metal batteries, regardless of size or number of batteries, be labeled with the following statement: "LITHIUM METAL BATTERIES- FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT". The labeling requirement covers shipments via highway, rail, vessel or cargo-only aircraft and covers all shipments inside, into or out of the US. The label must be in contrasting color and the letters must be 12 mm (0.5 in) in height for packages weighing more than 30 Kg and 6 mm (0.25 in) in height for packages weighting less than 30 Kg. If you plan on transporting any untested prototype battery packs contact your Panasonic Sales Representative for regulatory information. First Aid If you get electrolyte in your eyes, flush with water for 15 minutes without rubbing and immediately contact a physician. If you get electrolyte on your skin wash the area immediately with soap and water. If irritation continues, contact a physician. If a battery is ingested, call the National Capital Poison Center (NCPC) at 202-625-3333 (Collect) or your local poison center immediately. Lithium coin batteries lodged in the esophagus should be removed immediately. Leakage, chemical burns and perforation can occur within hours of ingestion. General Recommendations O O CAUTION: Risk of fire, explosion and burns. Do not recharge, crush, heat above 212 F (100 C) or incinerate. Fire Safety In case of fire, you can use a Class "D" fire extinguisher or other smothering agent such as Lith-X, copper powder or dry sand. If you use water, use enough to smother the fire. Using an insufficient amount of water will only make the fire worse. Cooling the exterior of the batteries will help prevent rupturing. Burning of these batteries will generate toxic and corrosive lithium hydroxide fumes. Fire fighters should use self-contained breathing apparatus. Detailed information on fighting a lithium metal battery fire can be found in Guide 138 (Substances - Water - Reactive) of the US DOT Emergency Response Guide. Notice: The information and recommendations set forth are made in good faith and are believed to be accurate at the date of preparation. Panasonic Industrial Company makes no warranty expressed or implied. 004-14 Page 2 of 2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: 2CR-5MPA 2CR5M