ZB5AS864 Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Emergency stop head switching off, plastic, red mushroom O60, O22, trigger latching turn to release Main Range of product Harmony XB5 Product or component type Head for emergency stop push-button Product destination Emergency stop push-button Device short name ZB5 Bezel material Dark grey plastic Head type Standard Mounting diameter 22mm Sale per indivisible quantity 1 Shape of signaling unit head Round Type of operator trigger action and mechanical latching Reset Turn to release Operator profile Red mushroom O 60 mm, unmarked Device presentation Basic element Complementary CAD overall width 60mm CAD overall height 60mm CAD overall depth 57mm Mechanical durability 300000cycles Station name XALD 1 cut-out XALK 1 cut-out Electrical composition code C7 for <4 contacts using single blocks in front mounting C8 for <4 contacts using single and double blocks in front mounting C11 for <3 contacts using single blocks in front mounting C15 for <1 contacts using single blocks in front mounting SF1 for <3 contacts using single blocks in front mounting SR1 for <3 contacts using single blocks in rear mounting Feb 23, 2021 1 C10 for <4 contacts using single and double blocks in front mounting Compatibility code ZB5 Environment Protective treatment TH Ambient air temperature for storage -40...70C Ambient air temperature for operation -40...70C Overvoltage category Class II conforming to IEC 60536 IP degree of protection IP66 conforming to IEC 60529 IP67 IP69 IP69K NEMA degree of protection NEMA 13 NEMA 4X Resistance to high pressure washer 7000000Pa at 55C, distance : 0.1 m IK degree of protection IK03 conforming to IEC 50102 Standards UL 508 CSA C22.2 No 14 EN/IEC 60947-5-4 EN/ISO 13850 IEC 60364-5-53 JIS C8201-5-1 GB 14048.5 EN/IEC 60947-1 EN/IEC 60204-1 EN/IEC 60947-5-1 EN/IEC 60947-5-5 JIS C8201-1 Product certifications GL RINA UL listed LROS (Lloyds register of shipping) DNV CSA BV Vibration resistance 5 gn (f= 2...500Hz) conforming to IEC 60068-2-6 Shock resistance 30 gn (duration = 18ms) for half sine wave acceleration conforming to IEC 60068-2-27 50 gn (duration = 11ms) for half sine wave acceleration conforming to IEC 60068-2-27 Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 55g Package 1 Height 8.8cm Package 1 width 7cm Package 1 Length 7cm Unit Type of Package 2 S03 Number of Units in Package 2 40 Package 2 Weight 2.704kg Package 2 Height 30cm Package 2 width 30cm Package 2 Length 40cm Offer Sustainability Sustainable offer status Green Premium product REACh Regulation REACh Declaration REACh free of SVHC Yes EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration 2 Toxic heavy metal free Yes Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information Contractual warranty Warranty 18 months 3 Product data sheet Dimensions Drawings Dimensions 4 ZB5AS864 Product data sheet Mounting and Clearance ZB5AS864 Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board (1) (2) (3) Diameter on finished panel or support For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended. +0.4 +0.016 O22.5mm recommended (O22.3 0 ) / O0.89in. recommended (O0.88in. 0 ) Connections a in mm a in in. b in mm b in in. By screw clamp terminals or plug-in connector 40 1.57 30 1.18 By Faston connectors 45 1.77 32 1.26 On printed circuit board 30 1.18 30 1.18 Detail of Lug Recess (1) (2) (3) Diameter on finished panel or support For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended. +0.4 +0.016 O22.5mm recommended (O22.3 0 ) / O0.89in. recommended (O0.88in. 0 ) 5 Product data sheet Mounting and Clearance ZB5AS864 Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer's Side) A: B: 30mm min. / 1.18in. min. 40mm min. / 1.57in. min. Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: B: 30mm min. 40mm min. 6 Dimensions in in. A: B: 1.18in. min. 1.57in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3mm / 0.012in.: T1 + T2 = 0.3mm max. Installation Precautions Minimum thickness of circuit board: 1.6mm / 0.06in. Cut-out diameter: 22.4mm 0.1 / 0.88in. 0.004 Orientation of body/fixing collar ZB5AZ009: 230' (excluding cut-outs marked a and b). Tightening torque of screws ZBZ006: 0.6N.m (5.3lbf.in) max. Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws: every 90mm / 3.54in. horizontally (X), and 120mm / 4.72in. vertically (Y). with each selector switch head (ZB5AD*, ZB5AJ*, ZB5AG*). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. (1) (2) (2) (4) Head ZB5AD* Panel Nut Printed circuit board 7 Mounting of Adapter (Socket) ZBZ01* 1 2 elongated holes for ZBZ006 screw access 2 1 hole O 2.4mm 0.05 / 0.09in. 0.002 for centring adapter ZBZ01* 3 8 x O 1.2mm / 0.05in. holes 4 1 hole O 2.9mm 0.05 / 0.11in. 0.002, for aligning the printed circuit board (with cut-out marked a) 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b) 6 4 holes O 2.4mm / 0.09in. for clipping in adapter ZBZ01* Dimensions An + 18.1 relate to the O 2.4mm 0.05 / 0.09in. 0.002 holes for centring adapter ZBZ01*. 8 Product data sheet Technical Description ZB5AS864 Electrical Composition Corresponding to Code C7 9 Product data sheet Technical Description ZB5AS864 Electrical Compositions Corresponding to Code C8 10 Product data sheet Technical Description ZB5AS864 Electrical Compositions Corresponding to Code C10 11 Product data sheet Technical Description ZB5AS864 Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1 12 Product data sheet Technical Description ZB5AS864 Electrical Composition Corresponding to Code C15 1 N/O 1 N/C 1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C 13 Product data sheet Technical Description Legend Single contact Double contact Light block Possible location 14 ZB5AS864