Vishay Thin Film Molded, 50 Mil Pitch Resistor Networks FEATURES * Lead (Pb)-free available * 0.090" (2.29 mm) maximum seated height * Rugged, molded case construction (0.22" wide) * Highly stable thin film (500 ppm at 70 C, 10 000 hours) * Low temperature coefficient, 25 ppm/C (- 55 C to + 125 C) * Wide resistance range 100 to 100 k Actual Size Pb-free Available RoHS* COMPLIANT TYPICAL PERFORMANCE Vishay Thin Film offers standard circuits in 16 pin in a medium body molded surface mount package. The networks are available over a resistance range of 100 to 100 k. The network features tight ratio tolerances and close TCR tracking. In addition to the standards shown, custom circuits are available upon request. TCR TOL ABS TRACKING 25 5 ABS RATIO 0.1 0.025 SCHEMATIC The 01 circuit provides 15 nominally equal resistors, each connected between a common lead (16) and a discrete PC board pin. Ref. The 03 circuit provides a choice of 8 nominally equal resistors with each resistor isolated from all others and wired directly across. Ref. Pin No. 1 Pin No. 1 TOMC-1603 03 circuit TOMC-1601 01 circuit STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Pin number 16 100 to 100 k Resistance Range TCR: Tolerance: Power Rating: Stability: Tracking Absolute 5 ppm/C - 55 C to + 125 C 25 ppm/C - 55 C to + 125 C 0.5 %, 0.1 %, 0.05 %, 0.025 % + 25 C Absolute 0.1 %, 0.5 %, 0.25 %, 0.1 % + 25 C Resistor Pin 1 Common = 50 mW Isolated = 100 mW Max. at + 70 C Package 750 mW Max. at + 70 C R Absolute 500 ppm 2000 h at + 70 C 150 ppm 2000 h at + 70 C Ratio R Ratio Voltage Coefficient 0.1 ppm/V Working Voltage 50 V Operating Temperature Range - 55 C to + 125 C Storage Temperature Range - 55 C to + 150 C Noise < - 30 dB Thermal EMF Shelf Life Stability: CONDITIONS 0.08 V/C Absolute 100 ppm 1 year at + 25 C Ratio 20 ppm 1 year at + 25 C * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 60008 Revision: 14-May-07 For technical questions, contact: thin-film@vishay.com www.vishay.com 27 SURFACE MOUNT NETWORKS TOMC Molded, 50 Mil Pitch Resistor Networks Vishay Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters A D DIMENSION D E F G H J K L M N P Q R S G E Typical H Part No. Date Code F Centered Max Marking Area TOMC-XX VISHAY Symbol Lead #1 Indicator 7 L 0.015 (1.27) K J 7 B M Centered Max, Marking Area Q P C R N S 7 7 TYPE 16 INCHES 0.050 0.018 0.160 0.08 0.036 0.22 0.244 0.30 0.045 0.003 0.005 0.008 0.085 0.003 A 0.350" (8.89) MM 1.27 0.457 4.06 2.03 0.914 5.59 6.20 7.52 1.14 0.076 1.27 0.203 2.16 0.076 B 0.400" (10.16) C 0.440" (11.176) DERATING CURVES TOMC-1601 0.75 W TOMC-1603 0.75 W 0.65 W POW ER 0.65 W POW ER SURFACE MOUNT NETWORKS TOMC 0.48 W Single Resistor 0.48 W Single Resistor 0.085 W 0.045 W 0.05 W 0.05 W - 50 C - 25 C - 50 C + 70 C + 125 C + 150 C - 25 C + 70 C + 125 C + 150 C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TOMC16031002BUF (preferred part number format) T T O M C 1 6 0 3 1 0 0 2 B U F O M C T 1 6 0 1 1 0 0 3 Z T 1 GLOBAL MODEL (4 or 5 digits) PINS SCHEMATIC RESISTANCE TOMC (Tin Lead) 16 01 = 15 bussed equal resistors First 3 digits are significant figures and the last digit specifies the number of zeroes to follow. TOMCT (Lead (Pb)-free) (e3) 03 = 7 or 8 Isolated equal resistors Example: 1002 = 10K 1003 = 100K TOLERANCE AND RATIO TOLERANCE Ratio Abs. Tol. 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % 0.025 % **A = 0.1 % B = 0.1 % C = 0.25 % D = 0.5 % F=1% *Z = 0.1 % * Tol. available 1K and up ** Tol. available 250 and up PACKAGING TAPE AND REEL T0 = 100 Min 100 Mult T1 = 1000 Min 1000 Mult T3 = 300 Min 300 Mult T5 = 500 Min 500 Mult TF = Full Reel 2000 TS = 100 Min 1 Mult UF = TUBED Historical Part Number example: TOMC16011002Z (will continue to be accepted) TOMC 16 01 1002 Z SERIES NUMBER OF LEADS SCHEMATIC RESISTANCE TOLERANCE AND RATIO TOLERANCE www.vishay.com 28 For technical questions, contact: thin-film@vishay.com Document Number: 60008 Revision: 14-May-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1