GE
Sensing
NTC Type JI is a Thermometrics
product. Thermometrics has
joined other GE high-technology
sensing businesses under a new
name—GE Industrial, Sensing.
g
Thermometrics Double
Insulated Chip
Thermistor with
Insulated Wires
Features
• Waterproof to IP68
• Withstands freeze/thaw cycling
• Available using any device in the Thermometrics
standard NK and DC95 ranges
• Range of wire lengths 11.81 in to 196.85 in
(300 mm to 5000 mm) (dimension WL on page 2)
• Suitable for refrigeration applications, including
evaporators
NTC Type JI
GE
Sensing
Type JI
Specifications
g©2006 GE. All rights reserved.
920-350A
All specifications are subject to change for product improvement without notice.
GE®is a registered trademark of General Electric Co. Other company or product
names mentioned in this document may be trademarks or registered trademarks
of their respective companies, which are not affiliated with GE.
www.gesensing.com
Description
Chip thermistor housed in a tip, which is molded onto
flexible circular cable. Tip and outer cable insulation
material is thermoplastic elastomer. Tinned copper
conductors have individual polyolefin insulation.
Options
• Other resistance – temperature characteristics
• Other wire lengths
Data
• Temperature range: -40°F to 221°F (-40°C to 105°C)
• Insulation resistance: >100 MΩat 500 VDC
• Wire conductors: 7 X 0.23 mm diameter (0.30 mm2)
• Resistance - temperature characteristics:
Refer to NK and DC95 data sheets
Ordering Information
The code number to be ordered may be specified as follows:
Code Type
JI Double Insulated With Insulated Wires
Code Type
103C1R2 NK103C1R2 See NK or DC95 Data sheets
F103W DC95F103W
Code Wire Length WL in mm
L301 300 ± 10
L501 500 ± 10
L751 750 ± 20
L102 1000 ± 20
L152 1500 ± 25
L202 2000 ± 25
L252 2500 ± 50
L302 3000 ± 50
L352 3500 ± 50
L402 4000 ± 50
L452 4500 ± 50
L502 5000 ± 50
JI - ____ - ____ Typical model number
Resistance characteristic and wire length are specified by the product code: e.g. JI103C1R2 or
JIF103W
Other wire lengths are available for quantities > 5000 pieces as above with a wire tolerance
at > 3.28 ft (1 m) of +100 /- 0 mm (+3.9 in /- 0 in)
0.197 in (5 mm) Ø Maximum
0.138 in (3.5 mm) Ø Maximum
0.787 in (20 mm) Nominal
WL
NTC Type JI dimensions
