CUSTOMER DRAWING
Raychem
Devices
TITLE: SOLDERSHIELD SPLICE
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets] DOCUMENT NO.: D-150-10XX
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
DOC. ISSUE: D1 DATE:
11-OCT-2018
DRAWN BY:
M. FORONDA CAGE CODE:
06090 REPLACES:
D030303 ECO NUMBER:
ECO-18-016166 PROD. REV.:
SEE TABLE SCALE:
None SIZE:
A SHEET:
1 of 1
© 2018 TE Connectivity Corporation. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product
Name Prod.
Rev.
Splice Dimensions Usable Assembly Diameters
I.D.
min L11.0
(L10.04) L2
Ref. Shield Overlap
max Cable
min Jacket Cable
max
D-150-1004 A 10.0 (0.390) 10.0 (0.390) 34.0 (1.350) 9.0 (0.355) 4.0 (0.155) 10.0 (0.390)
D-150-1005 A 11.3 (0.445) 14.0 (0.550) 46.0 (1.800) 10.7 (0.420) 5.0 (0.195) 11.3 (0.445)
D-150-1006 A 13.5 (0.530) 14.0 (0.550) 46.0 (1.800) 12.5 (0.490) 6.0 (0.235) 13.5 (0.530)
D-150-1007 A 15.0 (0.590) 14.0 (0.550) 46.0 (1.800) 14.0 (0.550) 7.0 (0.275) 15.0 (0.590)
D-150-1008 A 16.5 (0.650) 14.0 (0.550) 46.0 (1.800) 15.5 (0.610) 8.0 (0.315) 16.5 (0.650)
D-150-1009 A 18.0 (0.710) 16.0 (0.630) 60.0 (2.360) 17.0 (0.670) 9.0 (0.355) 18.0 (0.710)
D-150-1010 A 20.0 (0.790) 16.0 (0.630) 60.0 (2.360) 19.0 (0.750) 10.0 (0.390) 20.0 (0.790)
D-150-1011 A 23.0 (0.905) 16.0 (0.630) 60.0 (2.360) 22.0 (0.865) 11.5 (0.450) 23.0 (0.905)
D-150-1013 A 26.0 (1.020) 16.0 (0.630) 60.0 (2.360) 25.0 (0.985) 14.5 (0.570) 26.0 (1.020)
D-150-1014 A 30.0 (1.180) 20.0 (0.790) 72.0 (2.830) 28.6 (1.125) 18.5 (0.725) 30.0 (1.180)
D-150-1016 A 35.5 (1.400) 20.0 (0.790) 75.0 (2.950) 34.4 (1.355) 19.5 (0.765) 35.5 (1.400)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, translucent natural, radiation cross-linked thermoplastic, polyolefin.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI/J-STD-006.
FLUX: TYPE ROM1 per ANSI/J-STD-004.
3. SHIELD: Solder impregnated, flux coated copper wire braid.
SOLDER: TYPE Sn63 per ANSI/J-STD-006.
FLUX: TYPE ROM1 per ANSI/J-STD-004
APPLICATION
1. These parts are designed to make a termination between the shield of a Tyco Electronics backshell adapter and the
shield of a cable.
2. Parts may be installed with convection (hot-air) heaters.
3. Temperature Range: -55° C to +135° C.
