TPCF8201 TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (U-MOS III) TPCF8201 Notebook PC Applications Portable Equipment Applications Unit: mm * Low drain-source ON resistance: RDS (ON) = 38 m (typ.) * High forward transfer admittance: |Yfs| = 5.4 S (typ.) * Low leakage current: IDSS = 10 A (max) (VDS = 20 V) * Enhancement-mode: Vth = 0.5 to 1.2 V (VDS = 10 V, ID = 200 A) Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Drain-source voltage VDSS 20 V Drain-gate voltage (RGS = 20 k) VDGR 20 V Gate-source voltage VGSS 12 V Drain current DC (Note 1) ID 3 Pulse (Note 1) IDP 12 PD (1) 1.35 PD (2) 1.12 Single-device operation Drain power (Note 3a) dissipation (t = 5 s) (Note 2a) Single-device value at dual operation (Note 3b) Single-device operation Drain power (Note 3a) dissipation (t = 5 s) (Note 2b) Single-device value at dual operation (Note 3b) A W 0.53 PD (2) 0.33 EAS 1.46 mJ Avalanche current IAR 1.5 A Repetitive avalanche energy Single-device value at dual operation (Note 2a, 3b, 5) EAR 0.11 mJ Channel temperature Tch 150 C Storage temperature range Tstg -55 to 150 C (Note 4) JEITA TOSHIBA PD (1) Single pulse avalanche energy JEDEC 2-3U1B Weight: 0.011 g (typ.) Note: For Notes 1 to 5, refer to the next page. Circuit Configuration 8 7 6 5 1 2 3 4 Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). This transistor is an electrostatic-sensitive device. Handle with caution. 1 http://store.iiic.cc/ 2009-09-29 TPCF8201 Thermal Characteristics Characteristics Single-device operation Thermal resistance, (Note 3a) channel to ambient (t = 5 s) (Note 2a) Single-device value at dual operation (Note 3b) Single-device operation Thermal resistance, (Note 3a) channel to ambient (t = 5 s) (Note 2b) Single-device value at dual operation (Note 3b) Symbol Max Rth (ch-a) (1) 92.6 Rth (ch-a) (2) 111.6 Rth (ch-a) (1) 235.8 Rth (ch-a) (2) 378.8 Unit C/W C/W Marking (Note 6) Lot No. Lot code (month) Part No. (or abbreviation code) F4A Product-specific code Pin #1 Lot code (year) Note 7 Note 1: Ensure that the channel temperature does not exceed 150C. Note 2: (a) Device mounted on a glass-epoxy board (a) (b) Device mounted on a glass-epoxy board (b) 25.4 25.4 FR-4 25.4 x 25.4 x 0.8 (Unit: mm) FR-4 25.4 x 25.4 x 0.8 (Unit: mm) (b) (a) Note 3: a) he power dissipation and thermal resistance values are shown for a single device. (During single-device operation, power is only applied to one device.) b) he power dissipation and thermal resistance values are shown for a single device. (During dual operation, power is evenly applied to both devices.) Note 4: VDD = 16 V, Tch = 25C (initial), L = 0.5 mH, RG = 25 , IAR = 1.5 A Note 5: Repetitive rating: Pulse width limited by maximum channel temperature Note 6: "" on the lower left of the marking indicates Pin 1. Note 7 A dot marking identifies the indication of product Labels. Without a dot: [[Pb]]/INCLUDES > MCV With a dot: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]] Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2 http://store.iiic.cc/ 2009-09-29 TPCF8201 Electrical Characteristics (Ta = 25C) Characteristics Gate leakage current Symbol Test Condition VGS = 10 V, VDS = 0 V IGSS Min Typ. Max Unit 10 A A IDSS VDS = 20 V, VGS = 0 V 10 V (BR) DSS ID = 10 mA, VGS = 0 V 20 V (BR) DSX ID = 10 mA, VGS = -12 V 8 Vth VDS = 10 V, ID = 200 A 0.5 1.2 RDS (ON) VGS = 2.0 V, ID = 1.5 A 62 100 RDS (ON) VGS = 2.5 V, ID = 1.5 A 50 66 RDS (ON) VGS = 4.5 V, ID = 1.5 A 38 49 Forward transfer admittance |Yfs| VDS = 10 V, ID = 1.5 A 2.7 5.4 Input capacitance Ciss 590 Reverse transfer capacitance Crss 70 Output capacitance Coss 85 3.0 7.5 Gate threshold voltage Drain-source ON resistance Rise time Turn-on time VDS = 10 V, VGS = 0 V, f = 1 MHz tr VGS ton Switching time Fall time ID = 1.5 A 5V 0V RL = 0.67 Drain-source breakdown voltage 4.7 Drain cut-off current tf V V m S pF ns 4.4 26 7.5 1.3 2.1 VDD - 10 V Turn-off time Total gate charge (gate-source plus gate-drain) Duty 1%, tw = 10 s toff Qg Gate-source charge1 Qgs1 Gate-drain ("miller") charge Qgd VDD - 16 V, VGS = 5 V, ID = 3.0 A nC Source-Drain Ratings and Characteristics (Ta = 25C) Characteristics Drain reverse current Forward voltage (diode) Pulse (Note 1) Symbol Test Condition Min Typ. Max Unit IDRP 12 A -1.2 V VDSF IDR = 3.0 A, VGS = 0 V 3 http://store.iiic.cc/ 2009-09-29 TPCF8201 ID - VDS ID - VDS 10 5 4 6 2 1.9 5 2.1 Pulse test (A) 8 1.8 3 Drain current ID ID Common source Ta = 25C Pulse test 3 Ta = 25C 4 Drain current 10 Common source 1.7 2 1.6 1.5 1 2 (A) 10 6 1.9 4 1.8 1.7 2 1.6 1.5 VGS = 1.4 V 0 0 0.4 0.2 0.6 Drain-source voltage VDS 0.8 VGS = 1.4V 0 0 1 1 (V) 3 2 Drain-source voltage ID - VGS VDS Common source 6 4 100 Ta = 25 0.8 Ta = -55C 0.6 0.4 1.5 0.2 25 1 Pulse test VDS Pulse test Drain-source voltage ID (A) Drain current (V) VDS = 10 V 8 2 3 4 VGS 0 0 5 (V) 2 4 6 Gate-source voltage Yfs - ID 8 VGS 10 (V) RDS (ON) - ID 100 1000 Common source Common source VDS = 10 V Ta = 25C Pulse test Pulse test Drain-source ON resistance RDS (ON) (m) Forward transfer admittance Yfs (S) ID = 3 A 0.75 Gate-source voltage Ta = -55C 10 25 100 1 0.1 (V) VDS - VGS Common source 0 0 5 1 10 2 4 1 VGS = 4.5V 2.5 10 1 0.1 10 2.0 100 Drain current ID (A) 1 10 Drain current ID (A) 4 http://store.iiic.cc/ 2009-09-29 TPCF8201 RDS (ON) - Ta IDR - VDS 120 10 10 Pulse test 100 VGS = 2.0 V ID = 1.5A,0.75A 80 ID = 3A 60 VGS = 2.5 V ID = 3A,1.5A,0.75A 40 20 ID = 3A,1.5A,0.75A VGS = 4.5 V 2.0 5 Drain reverse current IDR (A) Drain-source ON resistance RDS (ON) (m ) Common source 3 2.5 VGS = 0 V 1 0.5 0.3 Common source Ta = 25C Pulse test 0 -80 -40 0 40 80 120 0.1 0 160 Ambient temperature Ta (C) -0.8 -0.4 Drain-source voltage Capacitance - VDS VDS (V) Vth - Ta 1000 1.2 1 Gate threshold voltage Vth (V) (pF) Ciss Coss 100 Crss Common source VGS = 0 V 0.8 0.6 0.4 VDS = 10 V 0.2 f = 1 MHz Common source ID = 200A Pulse test Ta = 25C 10 0.1 1 3 5 Drain-source voltage 10 30 50 0 -80 100 VDS (V) -40 0 40 80 120 160 Ambient temperature Ta (C) Dynamic input / output characteristics PD - Ta 20 2 t=5s Device mounted on a glass-epoxy board (a) (Note 2a) (4) Single-device value at dual operation (Note 3b) (2) 0.8 (3) 0.4 16 4 VDS VDS (3) Single-device operation (Note 3a) Drain-source voltage Drain power dissipation PD (W) Device mounted on a glass-epoxy board (b) (Note 2b) (1) 1.2 (V) (2) Single-device value at dual operation (Note 3b) 1.6 (4) VGS (V) 6 (1) Single-device operation (Note 3a) 8 VDD = 16 V 12 4 VGS 8 Common source 2 ID = 3 A 4 Ta = 25C Gate-source voltage Capacitance C -1.2 Pulse test 0 0 40 80 120 0 0 160 Ambient temperature Ta (C) 2 4 6 8 0 10 Total gate charge Qg (nC) 5 http://store.iiic.cc/ 2009-09-29 TPCF8201 rth - tw 1000 Transient thermal impedance rth (C/W) (4) (3) (2) (1) 100 10 Device mounted on a glass-epoxy board (a) (Note 2a) (1) Single-device operation (Note 3a) (2) Single-device value at dual operation (Note 3b) Device mounted on a glass-epoxy board (b) (Note 2b) (3) Single-device operation (Note 3a) (4) Single-device value at dual operation (Note 3b) 1 1m 10 m 100 m 1 Pulse width 10 100 1000 tw (s) Safe operating Area Drain current ID (A) 100 ID max (pulse)* 10 1 ms* 10 ms* 1 *: Single pulse Ta=25 Curves must be derated linearly with increase in temperature. 0.1 0.1 1 Drain-source voltage VDSS max 10 100 VDS (V) 6 http://store.iiic.cc/ 2009-09-29 TPCF8201 RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 7 http://store.iiic.cc/ 2009-09-29