2CMA170511R1000 - ABB - Datasheet.Live

Product leaflet

Single phase electricity meters A41 and A42

EQ meters in Bronze version from ABB

The compact and versatile EQ meters A41 and A42 are

single phase meters with full four quadrants measuring

meaning both active/reactive energy measurements and

import/export of energy. They can be used in most of

the common applications for reliable and trustworthy

metering of energy usage.

EQ meters A41 and A42 in Bronze version can be used

in stand-alone applications or metering network instal-

lations with the option of inbuilt M-Bus or Modbus.

General features

The A series meters are ideal for many applications and

installations. The meters support a wide voltage range as well

as a wide temperature range. The display is pixel-oriented

and can display up to four quantities at the same time.

Navigating the meter is easily done via the push-buttons

below the display. To configure the meter settings, the set

button must be accessed and this button is protected against

unauthorized use when the transparent lid on the front of the

meter is closed and sealed. The power consumption of the

meter is very low, less than 0.8 VA, makes them economical

in the long run - an important feature especially for large

meter populations.

Communication

Data from A41 and A42 in Bronze version can be collected

via pulse output or serial communication. The meters are

equipped with a transistor output for 5-40 VDC external

supply. It can be used for pulses proportionally to the mea-

sured energy or various alarms. The meters are also available

with built-in serial communication interfaces for Modbus RTU

(RS-485) or M-Bus as options.

Import and export measurements

B21 Bronze version measures the energy flowing both in (im-

ported) and out (exported) through the meter and saves the

energy in separate registers.

Approvals

The A41 and A42 meters are type approved according to IEC

as well as type approved and verified according to MID. MID

is the Measure Instruments Directive 2004/22/EC from Euro-

pean Commission. The type approval is according to stan-

dards that covers all relevant technical aspects of the meter.

These include climate conditions, electromagnetic compatibility

(EMC), electrical requirements, mechanical requirements and

accuracy.

Instrumentation

The A41 and A42 meters in Bronze version support reading of

instrument values.

A large number of electrical properties can be read.

• Active power - Total and per phase

• Reactive power - Total and per phase

• Apparent power - Total and per phase

• Current

• Voltage

• Power factor

• Frequency

Ordering details

80 A direct connected, 4 DIN

Voltage V Communication Type Order code Weight

1 pc

Bronze

Active and reactive energy, import/export, pulse output, class B (Cl. 1), reactive Cl.2.

57.7...288 V AC RS-485 A41 212 - 100

2CMA170501R1000

0.23

6 A transformer CTVT connected, 4 DIN

Voltage V Communication Type Order code Weight

1 pc

Bronze

Active and reactive energy, import/export, pulse output, class B (Cl. 1), reactive Cl.2.

57.7...288 V AC RS-485 A42 212 - 100

2CMA170511R1000

0.20

dards that covers all relevant technical aspects of the meter.

These include climate conditions, electromagnetic compatibility

Product leaflet 2CMC484001L0201. Rev. A, October 2014. Prod. ABB AB, Low Voltage Products

A series

Technical data

A41 A42

Voltage/current inputs

Nominal voltage 230 V AC

Voltage range 57.7 ... 288 VAC (-20% - +15%)

Power dissipation voltage circuits 0.8 VA (0.8 W) total

Power dissipation current circuits 0.007 VA (0.007 W) at 230 V AC and Ib 0.001 VA (0.001 W) at 230 V AC and Ib

Base current Ib5 A -

Rated current In-1 A

Reference current Iref 5 A -

Transitional current Itr 0.5 A 0.05 A

Maximum current Imax 80 A 6 A

Minimum current Imin 0.25 A 0.02 A

Starting current Ist < 20 mA < 1 mA

Terminal wire area 1 - 25 mm20.5 - 10 mm2

Recommended tightening torque 3 Nm 1.5 Nm

Communication

Terminal wire area 0.5 - 1 mm2

Recommended tightening torque 0.25 Nm

Transformer ratios

Conﬁgurable current ratio (VT) -1/999 - 999999/1

Conﬁgurable current ratio (CT) -1/9 - 9999/1

Pulse indicator (LED)

Pulse frequency 1000 imp/kWh 5000 imp/kWh

Pulse length 40 ms

General data

Frequency 50 or 60 Hz ± 5%

Accuracy Class B (Cl. 1) and reactive Cl. 2 B (Cl. 1), C (Cl. 0.5 S) or reactive Cl. 2

Active energy 1% 0.5 %, 1%

Display of energy Pixel oriented

Environmental

Operating temperature -40°C - +70°C

Storage temperature -40°C - +85°C

Humidity 75% yearly average, 95% on 30 days/year

Resistance to ﬁre and heat Terminal 960 °C, cover 650°C (IEC 60695-2-1)

Resistance to water and dust IP20 on terminal block without protective enclosure and IP51 in protective enclosure,

according to IEC 60529.

Mechanical environment Class M2 in accordance with the Measuring Instrument Directive (MID). (2004/22/EC).

Electromagnetic environment Class E2 in accordance with the Measuring Instrument Directive (MID), (2004/22/EC).

Outputs

Current 2 - 100 mA

Voltage 5 - 240 V AC/DC. For meters with only 1 output, 5 - 40 V DC.

Pulse output frequency Programmable: 1 - 999999 imp/kWh

Pulse length Programmable: 10 - 990 ms

Terminal wire area 0.5 - 1 mm2

Recommended tightening torque 0.25 Nm

EMC compatibility

Impulse voltage test 6 kV 1.2/50μs (IEC 60060-1)

Surge voltage test 4 kV 1.2/50μs (IEC 61000-4-5)

Fast transient burst test 4 kV (IEC 61000-4-4)

Immunity to electromagnetic HF-ﬁelds

80 MHz - 2 GHz at 10 V/m (IEC 61000-4-3)

Immunity to conducted disturbance 150 kHz - 80 MHz (IEC 61000-4-6)

Immunity to disturbance with harmonics 2 kHz - 150 kHz

Radio frequency emission EN 55022, class B (CISPR22)

Electrostatic discharge 15 kV (IEC 61000-4-2)

Standards

IEC 62052-11, IEC 62053-21 class 1& 2, IEC 62053-22 class 0.5 S, IEC 62053-23 class

2, IEC 62054-21, GB/T 17215.211-2006, GB/T 17215.321-2008 class 1 & 2,

GB/T

17215.322-2008, EN 50470-1, EN 50470-3 category A, B and C.

Mechanical

Material Polycarbonate in transparent front glass, bottom case, upper case and terminal cover.

Glass reinforced polycarbonate in polycarbonate in terminal cover.

Dimensions

Width 70 mm

Height 97 mm

Depth 65 mm

DIN modules 4

Specication subject to change without notice.

To get more information, install QR code

reader on your mobile device, scan the

code and see more.

ABB AB

Meters

Low Voltage Products

Box 1005

S-61129 Nyköping, Sweden

Phone +46 155 29 50 00

www.abb.com/lowvoltage

A41

Wiring diagram

A42

3 5

1 2

P1 P2

S1 S2

Dimensions