Safety-WalkTM Wet Area Matting 3200 ( formerly known as 3MTM EntrapTM Wet Area Matting ) Technical Data TD 420 - Issue 2 - Date: March 2001 Supersedes: December 1997 EK. Page 1 / 1 Description: 3MTM Safety-WalkTM Wet Area Matting 3200 is a floor matting having a flexible vinyl open mesh structure. The open mesh structure allows water to run through the matting so the surface stays drier than the surrounding area. The resilient surface is comfortable for bare feet, while the vinyl is formulated for resistance to chlorinated water, body oils, fungus, mildew and UV radiation. Product Positioning: For use in bare foot traffic areas to help provide slip resistant footing. Typical applications include locker rooms, corridors and the areas around saunas and showers . Each case is marked with product name, size, color, manufacturer's trade name. Installation & Cleaning Instructions: Detailed instruction multilingual leaflet included in each case. Accessories: ??3M Matting Edging, Medium Profile. ??3M Matting Accessory Adhesive Product disposal: Post consumer waste can be disposed off in appropriate containers and/or be incinerated. European code for waste disposal : 20.01.04 Resistance to chemicals: (All tests 30 days at 22 C) Limitations of Use: Not recommended in showers or in areas exposed to direct water. Not recommended for wet shoe traffic. Special Features: ?? Low profile ?? Safe ?? Easy to clean ?? Comfortable ?? Hygienic Colors: ?? Horizon blue ?? Wheat Sizes: (minimum values) Roll: 0.91 x 6.1 m Packaging and Marking: Rolls: 1 roll per case. 3M Commercial Care Laboratory Europe P.O. Box 324 1, rue G. Couturier F-92506 Rueil-Malmaison Cedex Solution Water Degreaser, nonchlorinated Ethylene glycol Isopropyl alcohol Oil, peanut Oil, vegetable 1% Soap solution Sodium hydroxide Tri-sodium phosphate Water 10% salt 0.2% chlorinated water Value ? Excellent Excellent Excellent Poor Excellent Excellent Excellent Excellent Excellent Excellent Excellent ? Excellent = no effect on product Good = product stiffens or discolors slightly. Poor = product becomes unsuitable for use. Product should not be used where it will regularly contact these chemicals. Product Requirements: Property Test method Thickness ? : ASTM D418-68 Sect 30-35 Weight ? : ASTM D418-68 Sect 10-19 Microbiological properties: ASTM G-21-70 Flammability: ??DOC-FF-1-70 (USA) ??ASTM E-648 (USA) (Radiant panel test) ??V.K.F. (CH): Electrical properties: AATCC-134 Static propensity (Neolite Soles) Environmental resistance: ASTM D-746 Brittle point Coef. of friction: ASTM D1894 apparatus fig 1 (C) ??Dry leather: ??Dry rubber: ??Wet leather: ??Wet rubber: ??Oil leather: ??Oil rubber: DIN 51097 List NB Value 6.0 mm 3.9 kg/m Inhibiting to fungal growth Passes >1.0 watt/cm 5.2 0.9 kV ? -29C to 60C (top surface of matting) 1.21 1.14 1.14 1.12 1.14 0.98 A+B+C ? Typical average values. ? Annoyance threshold is considered to be greater than 2.5 kV Origin of product: made in USA in an ISO 9002 certified plant. Source of supply: 3M France