NVG79D & E Series Low Power DIP OCXO Description: * Bliley's low power DIP OCXOs are designed for portable applications where low start-up and idling current are required to preserve battery life. * * * The Bliley Low Power DIP OCXO contains an internal hermetically sealed crystal for improved reliability and manufacturability. * This series of OCXOs has fast warm-up times, are available with various input supply voltages and have excellent frequency vs. temperature performance. Features: Low Input current during warm-up <250mA Warm-up Time as low as <10 Seconds Power Input at steady state <0.4 watts Standard Frequencies available; 10MHz, 12.8MHz, 16MHz, 16.384MHz, 19.44MHz, 20MHz, 26MHz, and 40MHz Many other Frequencies available, consult factory for your specific requirements. NVG79D Frequency Range: Output Frequency Range 20 KHz to 54MHz Frequency versus Temperature: Temperature Range Operating Options Temperature Option A 0C to 60C Option B -20C to+70C Option C -40 to +85 C Typical Specifications: Parameter Supply Voltage Output Signal Frequency <20MHz Frequency >20MHz Output Load Supply Voltage Output Signal Level "0" Level "1" Rise & Fall Time Duty Cycle Output Load www.bliley.com Tel (814) 838-3571 Frequency Stability (Block Tolerance) 0.05ppm 0.10ppm 0.20ppm Specification +3.3VDC & +5VDC Option A - Sine Wave >0.8 >0.63 50 3.3 5 12 Option B - HCMOS Compatible <0.4 >Vcc - 0.5V 4.5 - 5.0 <7 505 1K || 5pF Units NVG79E Vpp Vpp VDC V V nS % 2545 West Grandview Blvd Erie, PA. 16506 Page 1 of 2 Revision 1R4 NVG79D & E Series Low Power DIP OCXO Typical Specifications ...continued Parameter Aging 1st Year 10 Years Units 0.3 2.5 Short Term Stability 0.1 Sec to 30 Sec Typical @ 1 Sec Parameter Freq Stability vs. Supply Voltage; 5% Change ppm ppm <5 x 10 5 x 10-11 Offset from Carrier 1 Hz 10Hz 100Hz 1KHz 10KHz 0.1 Max 0.04 Typical Frequency Stability vs. Load Change; 10% Change -10 Phase Noise Performance: Typical @ 10MHz Units HCMOS Output Sine Wave Output -70 -100 -130 -140 -145 -75 -110 -135 -145 -150 Electronic Frequency Control: Voltage Control Supply Voltage Range +3.3VDC 0.0 - 3.3 VDC >2.5 0.5 - 5.0 VDC ---- 0.01 Max 0.006 Typical ppm ppm Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Supply Voltage +5.0VDC --->2.5 Supply Voltage +12VDC --->2.5 Units ppm ppm Power Supply Characteristics: Option "A" +3.3 <110 <170 <250 30 Input Voltage Input Current @ 30C Input Current @-20C Turn-on Current Warm-up Time Option "B" +5 <80 <120 <250 10 Option "C" +12 <30 <45 <250 10 Units VDC mA mA mA Seconds Ordering Options: Package Style NVG79 (ROHS Compliant) NVG79 www.bliley.com Tel (814) 838-3571 Temperature Range Output Type Power Supply D E A B C A B A B C Operating Frequency (MHz) XXMXXX XXMXXX XXMXXX D B A B 16M384 2545 West Grandview Blvd Erie, PA. 16506 Page 2 of 2 Revision 1R4