Products for
Mobile Equipment
R
o
HS
Ready
TYCO ELECTRONICS “TECHNOLOGY PORTFOLIO”
●Connector Systems /
Electromechanical Components
●Relays
●Wireless Products
●Sensors
●Fiber Optic Products
●Wire & Cable
●Application Tooling
●Antennas, GPS Antennas,
Integrated Antenna Systems
●Circuit Protection Devices
●Tubing & Harnessing Products
●Touch Screen Displays
●Power Systems
●Electronic Modules
●Resistors & Inductors
●Battery Connectors &
Assemblies
●Heat Sinks & Thermal Solutions
●Switches and Knobs
●Identification Labeling Products
●Racks & Panels
●Smart Cards / Leadframes
All specifications subject to change. Consult Tyco Electronics for latest specifications. 1
TYCO ELECTRONICS “AT YOUR SERVICE”
Internet Homepage
www.tycoelectronics.com
Electronic Internet Catalog
www.catalog.tycoelectronics.com
Tyco Electronics Online
The Tyco Electronics website is an innovative and
interactive source for application information,
product updates and technical solutions.
Our step-by-step software makes our website
intuitive and user-friendly to better serve you !
Please contact us at :
www.tycoelectronics.com
Product Information Center
(PIC)
You can rely on Tyco Electronics PIC Team to
provide you support for answers to your
general information or technical questions in
an efficient and effective manner.
To reach our PIC staff, please contact your
local Tyco Electronics organization.
Product Literature
For more information about Tyco Electronics and its wide range of products we offer you a variety of literature such as
product catalogs and a lot of product specific brochures.
For catalogs and product brochures please contact your local Tyco Electronics organization.
@
2
Introduction
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 3
Tyco Electronics supplies a unique expertise for today’s and tomorrow’s mobile equipment
applications, including cellular phones, mobile media players, digital camera’s, GPS, payment
terminals and other portable electronics.
We also provide high-level analyses and simulation services to allow OEMs to predict system
performance, resulting in faster design cycles and lower costs. In addition our early involvement
programs allow us to design next-generation products to support equipment requiring more
speed, higher density and lower costs.
Our wide product portfolio for mobile equipment ranges from a variety of connectors (SIM, I/O,
Battery, Camera, LCD, Board-to-Board, FPC etc.) to battery packs, antennas circuit protection,
cable assemblies and others.
In addition to that Tyco Electronics offers a set of technologies especially developed to offer low
applied cost products to our customers in example MID technology (Molded Interconnection
Device).
We have several dedicated Mobile Equipment engineering teams to provide you with the best
service from persons which understand the way you are doing business.
The teams are dedicated to your success and are located in several regions of the world. These
regions are fully equipped with all necessary services such as quick turn sample shop, simulation
equipment, test laboratories and others.
Our standard offering is broad and reflected in this catalog. Therefore we are pleased to introduce
you to our portfolio for mobile equipment.
10 Reasons to Choose Tyco Electronics for Mobile Equipment Applications
1. Tyco Electronics is committed to customer success!
2. Wide range of products applicable for mobile equipment.
3. Global Sales, Logistics, Development and manufacturing teams in all regions of the world.
4. The most innovative connector company in the industry.
5. Low cost manufacturing locations around the globe.
6. Working with 8 of the top 10 OEM’s.
7. Dedicated development teams for mobile equipment.
8. Wide range of (patented) technologies which enable reduction of applied cost.
9. Organization adopted to working with mobile equipment OEM’s and ODM’s.
10. Our commitment is your advantage.
Table of Contents
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Restriction on the Use of Hazardous Substances (RoHS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connectors
Generic SIM Connector, 6 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Generic SIM Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5-Directional SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Scaleable SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Super Low Profile SIM Connector with Full Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Mini UICC SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Sliding SIM Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
0.4 mm Pitch 1.0 mm or 1.5 mm Height Board-to-Board Connector . . . . . . . . . . . . . . . . 14
0.3 mm FPC Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Circular Audio Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Circular DC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Mini USB Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Mini USB Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Micro USB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Generic Snake and Pad Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Multi Media Interface Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
MDIC and S-MDIC Connector System, 12 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
HDMI Connectors, Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Memory Card Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Micro SD Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Micro SD/SIM Combi Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Micro SD Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Spring Probe Connector (SPC), 1 Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Spring Fingers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
LCD ITO Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
LCD Connector 0.65 mm, 10 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Standard Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Standard Switching Coax Test Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Standard Switching Coax Right-Angle Cable Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Standard Switching Coax with ESD Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
MID Micro Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
MID Nano Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Spring Probe Connector (SPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Generic Battery Connector, 2 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
1.6 mm Pitch Low Profile Battery Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Right-Angle Leaf Spring Battery Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Battery Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Inboard SMIA 85 Camera Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Onboard SMIA 85 Camera Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Super Low Profile (SLP) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Micro SLP Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
STAX™ LD Elastomeric Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
STAX™ Array Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Elastiboot™ Connectors for Microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
STAX™ Elastomeric Connectors for COG LCDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
SMT-ETI-1 STAX™ Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
STAX™ Coax Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Vibration Motor Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Table of Contents (continued)
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5
Antenna Products
Antenna Manufacturing Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
RF Engineering Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
MID Technology
MID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Cable Products
USB Data Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Music Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Charger Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Mobile Phone Headset Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Bluetooth Hands-Free Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
High-Speed Micro-Coax Cable Assembly (MCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Batteries
Battery Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Mechatronic Center Niefern
Technology Portfolio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
LAMFRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Mini SIM Card Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
M/A-COM Antenna Products
GaAs SP6T 2.5 V Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Raychem Circuit Protection Products
Lithium Cells and Battery Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Rechargeable Battery Pack Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Portable Electronics Input Port Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
HDMI: LCD, Plasma, HDTV, Set-Top Box, DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Strap Battery Devices – VLR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Strap Battery Devices – VLP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Strap Battery Devices – VTP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Strap Battery Devices – LTP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Strap Battery Devices – LR4 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Strap Battery Devices – SRP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Surface-Mount Devices – nanoSMDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Surface-Mount Devices – microSMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Surface-Mount Devices – miniSMDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Surface-Mount Devices – miniSMDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Fast Acting Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Slow Blow Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
ESD Protection Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Switches
FSM 6 x 6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
FSMCT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
FSM 3.4 x 6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
FSM 0.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Turtle Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
CoinKey™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Labels
MP Metalized Polyester Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Kapton®Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
WP White Polyester Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Restriction on the Use of Hazardous Substances (RoHS)
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
6
At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more
than 1.5 million end items/components for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted materials. Part numbers in this catalog
are identified as:
RoHS Compliant
Part numbers in this catalog are RoHS Compliant, unless marked otherwise.
These products comply with European Union Directive 2002/95/EC as amended 1 January 2006
that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain
electrical and electronic products sold into the EU as of 1 July 2006.
Note: For purposes of this Catalog, included within the definition of RoHS Compliant are products
that are clearly “Out of Scope” of the RoHS Directive such as hand tools and other non-electrical
accessories.
Non-RoHS Compliant
These part numbers are identified with a “” symbol. These products do not comply with the
material restrictions of the European Union Directive 2002/95/EC.
5 of 6 Compliant
A “” symbol identifies these part numbers. These products do not fully comply with the European
Union Directive 2002/95/EC because they contain lead in solderable interfaces (they do not
contain any of the other five restricted substances above allowable limits). However, these prod-
ucts may be suitable for use in RoHS applications where there is an application-based exception
for lead in solders, such as the server, storage, or networking infrastructure exemption.
Note: Information regarding RoHS compliance is provided based on reasonable inquiry of our
suppliers and represents our current actual knowledge based on the information provided by our
suppliers. This information is subject to change. For latest compliance status, refer to our website
referenced below.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your
questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available
with links to more detailed information. You can also submit RoHS questions and receive a
response within 24 hours during a normal work week. The Support Center also provides:
■Cross-Reference from Non-compliant to Compliant Products
■Ability to browse RoHS Compliant Products in our on-line catalog:
http://ecommas.tycoelectronics.com/commerce/alt/RohsAltHome.do
■Downloadable Technical Data Customer Information Presentation
■More detailed information regarding the definitions used above
So whatever your questions when it comes to RoHS, we’ve got the
answers at www.tycoelectronics.com/leadfree
RoHS
Customer
Support
Center
Restriction on the Use
of Hazardous Substances
(RoHS)
Generic SIM Connector, 6 Positions
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 7
Generic SIM Connector,
6 Positions
Features
SIM (Security Identity Module)
and UIM (Universal Identity
Modules) cards have been and
continue to be used in mobile
equipment. Tyco Electronics
offers a wide selection of low
cost SMT SIM connectors with
heights from 1.9 mm to 4.0 mm
depending on your height
requirements. Several variations
have been tooled with and
without ribs or positive stop
(contact retention feature).
This product works with SIM
cards of Generation 1, 2 and 3.
All variations are packaged in
tape & reel for pick and place
manufacturing.
Material and Finish
Insulator:
LCP, glass-filled, black color
Contact Pin:
Phosphor bronze
Contact Plating:
Selectively gold over nickel plated
Documentation
Drawing:
C-338063
Product Specification:
108-19122
Test Report:
501-19011
Application Specification:
114-19054
Height
(mm)
Package
Quantity
(Pieces
per Reel)
1.9 1-338063-9 1-1377227-9 1-1483288-9 1-1483437-9 1400
2.0 2-338063-0 2-1377227-0 2-1483288-0 2-1483437-0 1400
2.1 2-338063-1 2-1377227-1 2-1483288-1 2-1483437-1 1400
2.2 2-338063-2 2-1377227-2 2-1483288-2 2-1483437-2 1400
2.3 2-338063-3 2-1377227-3 2-1483288-3 2-1483437-3 1400
2.4 2-338063-4 2-1377227-4 2-1483288-4 2-1483437-4 1400
2.5 2-338063-5 2-1377227-5 2-1483288-5 2-1483437-5 1400
2.6 2-338063-6 2-1377227-6 2-1483288-6 2-1483437-6 1400
2.7 2-338063-7 2-1377227-7 2-1483288-7 2-1483437-7 1400
2.8 2-338063-8 2-1377227-8 2-1483288-8 2-1483437-8 1140
2.9 2-338063-9 2-1377227-9 2-1483288-9 2-1483437-9 1140
3.0 3-338063-0 3-1377227-0 3-1483288-0 3-1483437-0 1140
3.1 3-338063-1 3-1377227-1 3-1483288-1 3-1483437-1 1140
3.2 3-338063-2 3-1377227-2 3-1483288-2 3-1483437-2 1140
3.3 3-338063-3 3-1377227-3 3-1483288-3 3-1483437-3 1140
3.4 3-338063-4 3-1377227-4 3-1483288-4 3-1483437-4 1140
3.5 3-338063-5 3-1377227-5 3-1483288-5 3-1483437-5 1140
3.6 3-338063-6 3-1377227-6 3-1483288-6 3-1483437-6 1140
3.7 3-338063-7 3-1377227-7 3-1483288-7 3-1483437-7 1140
3.8 3-338063-8 3-1377227-8 3-1483288-8 3-1483437-8 1140
3.9 3-338063-9 3-1377227-9 3-1483288-9 3-1483437-9 1140
4.0 4-338063-0 4-1377227-0 4-1483288-0 4-1483437-0 1140
Bold Part Numbers are tooled
Part Numbers
without Contact Retention with Contact Retention
with Ribs without Ribs with Ribs without Ribs
PCB Layout
Ribs
Dim. B
Height
2.54
2.54
11.7
7.0
1.0
1.5
1.7
7.5 8.5
2.54
2.54
Generic SIM Connector, 8 Positions
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
8
Generic SIM Connector,
8 Positions
Features
SIM (Security Identity Module)
and UIM (Universal Identity
Modules) cards have been and
continue to be used in mobile
equipment. Tyco Electronics
offers a wide selection of low
cost SMT SIM connectors with
heights from 1.9 mm to 4.0 mm
depending on your height
requirements.
All variations are packaged in
tape & reel for pick and place
manufacturing.
Material and Finish
Insulator:
LCP, glass-filled, black color
Contact Pin:
Phosphor bronze
Contact Plating:
Selectively gold over nickel plated
Documentation
Drawing:
C-338123
Product Specification:
108-19122
Test Report:
501-19011
Application Specification:
114-19054
3.0 3-338123-0 890
3.1 3-338123-1 890
3.2 3-338123-2 890
3.3 3-338123-3 890
3.4 3-338123-4 890
3.5 3-338123-5 890
3.6 3-338123-6 890
3.7 3-338123-7 890
3.8 3-338123-8 890
3.9 3-338123-9 890
4.0 4-338123-0 890
Height
(mm)
1.9 1-338123-9 1100
2.0 2-338123-0 1100
2.1 2-338123-1 1100
2.2 2-338123-2 1100
2.3 2-338123-3 1100
2.4 2-338123-4 1100
2.5 2-338123-5 1100
2.6 2-338123-6 1100
2.7 2-338123-7 1100
2.8 2-338123-8 1100
2.9 2-338123-9 890
Bold Part Number is tooled
Part Package
Quantity
Number (Pieces/Reel)
PCB Layout
Height
(mm)
Part Package
Quantity
Number (Pieces/Reel)
Dim. B
Height
2.54
7.62
7.0
10.1
max.
11.95 max.
11.7
7.62
1.9
1.5 1. 7
2.54
5-Directional SIM Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 9
5-Directional
SIM Connector
Features
Can be mated from 5 directions,
left, right, front, back and top.
The completely deep drawn
contact nose provides smooth
insertion and minimal card wear
under any condition.
Height range from 1.5 mm to
5.0 mm possible, while maintain-
ing 0.5 mm contact deflection
(GSM Specification).
This product works with SIM
cards of Generation 1, 2 and 3.
Material and Finish
Insulator:
GF liquid crystal polymer,
black color
Contact Pin:
Copper alloy
Contact Plating:
1.2 µm nickel underlayer,
1.25 µm gold at card side,
0.1– 0.2 µm gold at solder side
Documentation
Drawing:
C-1705300
Product Specification:
108-19280
Test Report:
501-19095
Application Specification:
114-19092
PCB Layout
Dimensions (mm)
AB
1.5 7.7 1-1705300-5 1450
1.6 7.7 1-1705300-6 1450
1.7 7.7 1-1705300-7 1450
1.8 7.6 1-1705300-8 1450
1.9 7.6 1-1705300-9 1450
2.0 7.5 2-1705300-0 1450
2.1 7.3 2-1705300-1 1450
2.2 7.2 2-1705300-2 1450
2.3 7.0 2-1705300-3 1450
2.4 6.7 2-1705300-4 1450
2.5 7.7 2-1705300-5 1150
2.6 7.5 2-1705300-6 1150
2.7 7.2 2-1705300-7 1150
2.8 6.9 2-1705300-8 1150
2.9 7.7 2-1705300-9 1150
3.0 7.4 3-1705300-0 1150
3.1 7.0 3-1705300-1 1150
3.2 7.7 3-1705300-2 1150
Bold Part Numbers are tooled
Part Package
Quantity
Number (Pieces/Reel)
Dimensions (mm)
AB
3.3 7.3 3-1705300-3 1450
3.4 6.7 3-1705300-4 1450
3.5 7.6 3-1705300-5 950
3.6 7.1 3-1705300-6 950
3.7 7.6 3-1705300-7 950
3.8 7.1 3-1705300-8 950
3.9 7.5 3-1705300-9 950
4.0 6.8 4-1705300-0 950
4.1 7.5 4-1705300-1 950
4.2 6.8 4-1705300-2 950
4.3 7.6 4-1705300-3 950
4.4 6.8 4-1705300-4 950
4.5 7.7 4-1705300-5 800
4.6 6.9 4-1705300-6 800
4.7 7.6 4-1705300-7 800
4.8 6.6 4-1705300-8 800
4.9 7.6 4-1705300-9 800
5.0 6.6 5-1705300-0 800
Part Package
Quantity
Number (Pieces/Reel)
Dim. B
Dim. A
10.0
1.0
2.0
7.6
0.5
0.1
2.54
2.54
2.54 2.54
Scaleable SIM Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
10
Scaleable SIM Connector
Features
Scaleable SIM connector height
from 0.7 mm to 2.0 mm (housing
height), featuring two different
kind of clips.
1 clip allover (1 piece clip design).
The one piece clip design
prevents for card bow.
2 piece clip design allows easy
removal of the SIM card.
Both versions have contact
retention (anti lifting) features
and smooth rounded contacts
in order to decrease card wear
to the minimum.
Total
Height
(mm)
Housing
Height
(mm)
1.9 0.7 -1747314-1 ––
2.0 0.8 – – –
2.1 0.9 -1871406-1 ––
2.2 1.0 – – –
2.3 1.1 – – –
2.4 1.2 2-292292-4 ––
2.5 1.3 2-292292-5 – 1-1705615-3
2.6 1.4 2-292292-6 2-292373-6 1-1705615-4
2.7 1.5 2-292292-7 2-292373-7 1-1705615-5
2.8 1.6 2-292292-8 2-292373-8 1-1705615-6
2.9 1.7 2-292292-9 2-292373-9 1-1705615-7
3.0 1.8 3-292292-0 3-292373-0 1-1705615-8
3.1 1.9 3-292292-1 3-292373-1 1-1705615-9
3.2 2.0 – 3-292373-2 2-1705615-0
Bold Part Numbers are tooled
Part Numbers
SIM with Card Stop SIM without Card Stop SIM without Card Stop
Clip Allover Clip Allover 2-Piece Clip
(1000 Pieces per Reel) (750 Pieces per Reel) (1100 Pieces per Reel)
Documentation Part No. 1705615 Part No. 292292 Part No. 292373 Part No. 1747314
Customer Drawing C-1705615 C-292292 C-292373 C-1747314
Product Specification 108-19241 108-60031 108-60031 108-5998
Test Report 501-19069 501-60001 501-60001 501-5559
Application Specification 114-19075 not available not available not available
Material and Finish
Insulator:
GF liquid crystal polymer,
black color
Contact Pin:
Copper alloy
Contact Plating:
1.2 µm nickel underlayer,
1.25 µm gold at card side,
0.1– 0.2 µm gold at solder side
Clip:
Stainless steel/phosphor bronze
Clip Plating:
3.0 µm Sn allover,
over 1.3 µm nickel underlayer
Super Low Profile SIM Connector with Full Clip
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 11
Super Low Profile
SIM Connector with Full Clip
Features
• Connector Height = 1.55 mm
max.
• Size (H x W x L): 1.43 x 16.3 x
17.5 mm
• Big clip totally encapsulates
SIM contact area
• Soldered clips provide additional
mechanical stability
• Datecode printed on the product
Material and Finish
Housing:
LCP
Contacts:
Copper alloy 1.3 µm nickel underlayer
0.4 µm gold in the contact area and
0.05 µm gold in the soldering area
Clip:
Stainless steel 1.3 µm nickel under-
layer, tin plated all over
Documentation
Drawing:
C-1981898
Product Specification:
108-78472
Test Report:
See Product Specification
Application Specification:
114-19075
Part No. 1981898-1
Package Quantity:
1000 pcs per reel
16.3
17.0 17.5
1.43
0.5 typ. 2.54
Mini UICC SIM Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
12
Total Height
(mm)
Housing Height
(mm)
Part Package
Quantity
Number (Pieces/Reel)
1.9 0.7 1-1827465-1 1000
2.4 1.2 1-1705813-2 1000
2.5 1.3 1-1705813-3 1000
2.6 1.4 1-1705813-4 1000
2.7 1.5 1-1705813-5 1000
2.8 1.6 1-1705813-6 1000
2.9 1.7 1-1705813-7 1000
3.0 1.8 1-1705813-8 1000
3.1 1.9 1-1705813-9 1000
Bold Part Numbers are tooled
Mini UICC SIM Connector
Features
This sliding SIM connector has
been developed for usage with
third generation SIM cards.
The scaleable connector is avail-
able in heights from 1.2 mm to
1.9 mm (housing height). The
forky contact provides a preload
as well as anti lifting capabilities.
The smooth and rounded con-
tacts ensure minimal card wear,
while the clip keeps the card in
position during usage.
Material and Finish
Insulator:
GF liquid crystal polymer,
black color
Contact Pin:
Copper alloy
Contact Plating:
1.2 µm nickel underlayer,
1.25 µm gold at card side,
0.1– 0.2 µm gold at solder side
Clip:
Stainless steel
Clip Plating:
3.0 µm Sn allover,
over 1.3 µm nickel underlayer
Documentation
Drawing:
C-1705813
Product Specification:
108-19241
Test Report:
501-19069
Application Specification:
114-19075 PCB Layout
13.4 12.9
3.98.1
2.54
1.6
2.7 2.77
0.9
2.2
2.89
5.43
7.97
12.1
13.4
7.7
5.0
1.0
11.3
13.4
Sliding SIM Connector, 8 Positions
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 13
Sliding SIM Connector,
8 Positions
Features
SIM (Security Identity Module)
and UIM (Universal Identity
Modules) cards have been and
continue to be used in mobile
equipment.
Tyco Electronics offers a wide
selection of low cost SMT sliding
SIM connectors.
Material and Finish
Insulator:
Thermoplastic HT, UL 94 V-0 rated,
black color
Contact Pin:
Copper alloy
Contact Plating:
Selective gold over nickel plated
Clip:
Brass, tin over nickel plated
Documentation
Drawing:
C-1857118
PCB Layout
Part No. 1857118-1
Package Quantity:
800 Pieces per Reel
7.62
15.7
11.8
5.9
3.7
2.54 typ.
2.5
1.0
∅ 0.8
∅ 0.9
∅ 0.6
0.6
0.9
2.65
7.62 16.4
0.78
13.3
11.41
8.0
5.3
1.55
0.2
0.4 mm Pitch 1.0 mm or 1.5 mm Height Board-to-Board Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
14
0.4 mm Pitch
1.0 mm or 1.5 mm Height
Board-to-Board Connector
Features
1.0 mm or 1.5 mm mated height
low profile stacking connector.
Connector body width is only
2.7 mm and enables space saving.
Formed contacts provide contact
points on rolled surface enabling
high reliability.
Multiple point contact system is
available (see note in table).
For the latest information please
contact your local sales engineer.
Material and Finish
Insulator:
Thermoplastic, black color
Contact Pin:
Copper alloy
Contact Plating:
Gold plating over nickel underplating
Documentation
Drawing:
C-See table
Product Specification:
108-5901
Test Report:
501-5570
Instruction Sheet:
411-78159
No. of
Positions
10 1-1871566-0 1-1747769-0 X – 1-1871275-0 1-1871274-0 X –
12 1-1871566-2 1-1747769-2 X – 1-1871275-2 1-1871274-2 – –
16 1-1871566-6 1-1747769-6 X – 1-1871275-6 1-1871274-6 – –
20 2-1871566-0 2-1747769-0 – X 2-1871275-0 2-1871274-0 – –
22 2-1871566-2 2-1747769-2 X – 2-1871275-2 2-1871274-2 – –
24 2-1871566-4 2-1747769-4 – X 2-1871275-4 2-1871274-4 – X
28 2-1871566-8 2-1747769-8 X – 2-1871275-8 2-1871274-8 – –
30 3-1871566-0 3-1747769-0 X – 3-1871275-0 3-1871274-0 – –
40 4-1871566-0 4-1747769-0 X – 4-1871275-0 4-1871274-0 – –
46 4-1871566-6 4-1747769-6 – X 4-1871275-6 4-1871274-6 – –
50 5-1871566-0 5-1747769-0 – X 5-1871275-0 5-1871274-0 – –
54 5-1871566-4 5-1747769-4 – – 5-1871275-4 5-1871274-4 – X
56 5-1871566-6 5-1747769-6 – – 5-1871275-6 5-1871274-6 – X
60 6-1871566-0 6-1747769-0 – X 6-1871275-0 6-1871274-0 – –
70 7-1871566-0 7-1747769-0 – – 7-1871275-0 7-1871274-0 – –
80 8-1871566-0 8-1747769-0 X – 8-1871275-0 8-1871274-0 – –
Stacking Height 1.0 mm: Plugs and Receptacles 4000 per Reel Stacking Height 1.5 mm: Plugs and Receptacles 3000 per Reel
Please contact sales for other pin counts.
Stacking Height 1.0 mm Stacking Height 1.5 mm
Plug Receptacle Prototype Mass Pro- Plug Receptacle Prototype Mass Pro-
Tool duction Tool Tool duction Tool
0.2n + 2.05
0.2n + 1.20
0.2n – 0.40
0.4 Pitch
1.23 2.2 2.66
0.2n + 2.1
0.2n + 1.2
0.2n – 0.4
0.4 Pitch
1.26 2.2 2.7
0.3 mm FPC Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 15
0.3 mm FPC Connector
Features
1.0 mm height low profile
and 3.8 mm width narrow FPC
connector for space saving.
FCP is securely connected with
easy one touch flip lever actuator.
For the latest information please
contact your local sales engineer.
Material and Finish
Insulator:
Thermoplastic
Color:
Body: beige, Actuator: black
Contact Pin:
Copper alloy
Contact Plating:
Gold plating over nickel underplating
Documentation
Drawing:
C-1746237
Product Specification:
108-5944
Test Report:
501-5647
No. of
Positions
11 0-1827827-1 0-1827674-1 0-1746237-1
13 0-1827827-2 0-1827674-2 0-1746237-2
15 0-1827827-3 0-1827674-3 0-1746237-3
17 0-1827827-4 0-1827674-4 0-1746237-4
19 0-1827827-5 0-1827674-5 0-1746237-5
21 0-1827827-6 0-1827674-6 0-1746237-6
23 0-1827827-7 0-1827674-7 0-1746237-7
25 0-1827827-8 0-1827674-8 0-1746237-8
27 0-1827827-9 0-1827674-9 0-1746237-9
29 1-1827827-0 1-1827674-0 1-1746237-0
31 1-1827827-1 1-1827674-1 1-1746237-1
33 1-1827827-2 1-1827674-2 1-1746237-2
35 1-1827827-3 1-1827674-3 1-1746237-3
37 1-1827827-4 1-1827674-4 1-1746237-4
39 1-1827827-5 1-1827674-5 1-1746237-5
41 1-1827827-6 1-1827674-6 1-1746237-6
43 1-1827827-7 1-1827674-7 1-1746237-7
45 1-1827827-8 1-1827674-8 1-1746237-8
47 1-1827827-9 1-1827674-9 1-1746237-9
49 2-1827827-0 2-1827674-0 2-1746237-0
51 2-1827827-1 2-1827674-1 2-1746237-1
53 2-1827827-2 2-1827674-2 2-1746237-2
55 2-1827827-3 2-1827674-3 2-1746237-3
57 2-1827827-4 2-1827674-4 2-1746237-4
Package Quantity: 4000 Pieces per Reel Please contact sales for available pin counts.
Part Numbers
Narrow Type Standard Type
Front Flip Lock Back Flip Lock Front Flip Lock
0.3n + 1.3
0.3n – 0.3
0.3n + 0.6
0.3n – 0.9
0.12 typ. 0.6 Pitch Ref.
0.3 Pitch
1.85
2.5
3.0
0.9
0.2
Circular Audio Connectors
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
16
Circular Audio Connectors
Features
Tyco Electronics offers several
circular Audio Connectors for
usage with 3.5 mm or 2.5 mm
diameter plug. The mounting
style, which can be either SMD
or compressive, where the
compressive style does not
require a solder connection and
is invulnerable for forces applied
to the connection.
Material and Finish:
See drawing
Documentation
Drawing:
See table
Product Specification:
See table
Test Report:
See table
Part
Number
Package
Quantity
(Pieces)
Plug
Diameter
(mm)
Connection
Style
Length
(mm)
Width
(mm)
Height
(mm) Switch Location
Pins
Product
Specification
Test
Report
1) 1705058-1 1) 4000 per Box 2.5 Compressive 13.5 07.2 5.0 Y N/A 108-19TBA 501-19TBA
1775250-1 1000 per Reel 2.5 SMD 11.6 07.7 3.0 Y Y 108-57570 501-57660
1470964-1 1000 per Reel 2.5 SMD 06.8 11.6 3.0 Y Y 108-57466 501-57536
1) 1377032-3 2) 3000 per Box 3.5 Compressive 12.7 13.0 5.0 Y N/A 108-19190 501-19056
1) 1377032-2 2) 3000 per Box 3.5 Compressive 12.7 13.0 5.0 Y N/A 108-19190 501-19056
1470033-1 50 per Tube 3.5 TH 14.2 09.2 4.5 Y Y 108-57185 501-57175
1470164-1 310 per Tray 3.5 TH 14.0 09.0 4.5 Y Y 108-57147 501-57130
1) 0440217-1 3) 55 per Tube 3.5 TH 14.2 09.2 4.5 Y Y 108-57047 501-57121
1) 0440217-2 4) 55 per Tube 3.5 TH 14.2 09.2 4.5 Y Y 108-57047 501-57121
1470636-1 700 per Reel 3.5 TH 13.5 06.0 5.0 Y Y 108-57296 501-57326
1470636-2 200 per Tray 3.5 TH 13.5 06.0 5.0 Y Y 108-57296 501-57326
1470778-1 700 per Reel 3.5 TH 13.5 06.0 5.0 Y Y 108-57296 501-57399
0440343-1 250 per Tray 3.5 TH 15.0 10.8 7.3 Y Y 108-57462 501-57532
1) Not yet tooled
2) Audio + DC, Application Specification 114-19046
3) Ring Color Silvery White
4) Ring Color Black
Circular DC Connectors
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 17
Circular DC Connectors
Features
Tyco Electronics offers several
Circular DC Connectors for
usage with 3.5 mm or 2.5 mm
diameter plug.
The mounting style, which can
be either SMD or compressive,
where the compressive style does
not require a solder connection
and is invulnerable for forces
applied to the connection.
Material and Finish:
See drawing
Documentation
Drawing:
See table
Product Specification:
See table
Test Report:
See table
Part
Number
Package
Quantity
(Pieces)
DC Plug
Diameter
(mm)
Connection
Style
Length
(mm)
Width
(mm)
Height
(mm) Switch
Pin
Diameter
(mm)
Location
Pins
Product
Specification
Test
Report
1) Audio + DC, Application Specification 114-19046
2) Application Specification 114-19091
3) Color Yellow
1470177-1 800 per Reel 3.5 SMD 9.3 8.0 5.2 Y 1.00 Y 108-57176 501-57187
1470177-2 800 per Reel 3.5 SMD 9.3 8.0 5.2 Y 1.30 Y 108-57176 501-57187
1857353-1 1000 per Reel 3.5 SMD 9.3 8.0 5.3 Y 1.00 Y – –
1857353-2 1000 per Reel 3.5 SMD 9.3 8.0 5.3 Y 1.30 Y – –
1) 1377032-3 1) 3696 per Box 3.5 Compressive 12.7013.005.0 Y 1.00 N/A 108-19190 501-19056.
1) 1377032-2 1) 3696 per Box 3.5 Compressive 12.7013.005.0 Y 1.25 N/A 108-19190 501-19056.
1) 1483596-2 2) 308 per Tray 2.5 Compressive 10.306.2 4.5 N 0.65 N/A 108-19278 501-19TBA
1) 1483596-1 3) 308 per Tray 2.5 Compressive 10.306.2 4.5 N 0.65 N/A 108-19278 501-19TBA
Mini USB Plug
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
18
Part
Number
No. of
Conductors Plug 1 Plug 2 Color Length
(mm)
Description
Package
Quantity
(Pieces)
Standard USB-A to Mini-B Assembly, 1.0 M 1000 1496476-1 275 per Box
Standard USB-A to Mini-B Assembly, 1.5 M 1500 1496476-2 220 per Box
Standard USB-A to Mini-B Assembly, 2.0 M 2000 1496476-3 150 per Box
4 USB Type A Mini B Black Standard USB-A to Mini-B Assembly, 3.0 M 3000 1496476-4 110 per Box
Standard USB-A to Mini-B Assembly, 5.0 M 5000 1496476-5 60 per Box
Standard USB-A to Mini-B Assembly, 12″305 1496476-6 200 per Box
Standard USB-A to Mini-B Assembly, 8″203 1496476-8 10 per Box
C2113A USB Cable 800 1750516-1 200 per Box
Part
Number
No. of
Contacts Type Color Description
Package
Quantity
(Pieces)
4 Mini B Black Mini B Plug with Contact Insert 4 Positions 0-1734205-1 1000 per Bag
5 Mini B Black Mini B Plug with Contact Insert 5 Positions 1-1734205-1 1000 per Bag
Not applicable Mini B Not applicable Top and Front Shield 3-1734205-1 1000 per Bag
Not applicable Mini B Not applicable Bottom Shield 4-1734205-1 1000 per Bag
Mini B Plugs
USB 2.0 Type A to Mini B Cable Assemblies
Mini USB Plug
Features
Tyco Electronics offers a
complete range of (Mini) USB
receptacles, cables and plugs.
The system is fully compliant
with the USB specification and
supports data transmission
speeds >USB 2.0 full speed.
Material and Finish
Insulator:
LCP, glass-filled, black color
Contact Pin:
Phosphor bronze
Contact Plating:
Selectively plated gold over nickel
Documentation
Drawing:
C-1734205
Product Specification:
108-57062
Test Report:
501-57070
Mini USB Receptacle
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 19
Mini USB Receptacle
Features
Tyco Electronics offers a
complete range of (Mini) USB
receptacles, cables and plugs.
The system is fully compliant
with the USB specification and
supports data transmission
speeds >USB 2.0 full speed.
Material and Finish
Housing:
High temperature thermoplastic,
UL 94 V-0, black color
Contact:
Phosphor bronze, selectively plated
gold over nickel and tin-lead in
solder area
Shell:
Phosphor bronze, half bright tin
over copper underplating
Documentation
Drawing:
C-See table
Product Specification:
108-57062
Test Report:
501-57070 Part
Number
No. of
Contacts Color P&P
Tape
Locating
Post
Description
Package
Quantity
(Pieces)
4 Black Mini USB, Receptacle Y N 1-1775055-1 700 per Reel
YN
1-1734035-1 150 per Tray
1-1734035-3 700 per Reel
5 Black Mini USB, Right-Angle, SMT, pbFree Y Y 1-1734035-4 700 per Reel
NN
1-1734035-1 150 per Tray
1-1734035-3 700 per Reel
Mini USB Receptacles, Type B
Micro USB Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
20
Part
Number
No. of
Conductors Type Color Description
Package
Quantity
(Pieces)
Receptacle Gray Receptacle AB 1981584-1 1000
5Black Receptacle B 1981568-1 1000
Plug White Plug A Type 1939053-1 1000
Black Plug B Type 1939054-1 1000
Micro USB Connector
Features and Advantages
The brand new Micro USB con-
nector further decreases the size
needed for the popular USB con-
nector system, while maintaining
performance on the same level.
It is specifically developped for
mobile phone applications where
size is a major issue.
• Low profile connector system;
Height = 2.7 mm
(2.7 x 5.0 x 7.5 mm)
• Robust design
• 10,000 cxycles durability
• Latching design provides strong
mating
Material and Finish
Insulator:
Thermoplastic resin
Contact Pin:
Copper alloy
Contact Plating:
Selectively gold plated over
Ni-Pd over nickel
Shell:
Stainless steel, tin over nickel plated
Documentation
Drawing:
C-See table
Product Specification:
108-78434
Test Report:
See Product Specification
Generic Snake and Pad Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 21
Generic Snake and
Pad Connector
Features
The Snake and Pad contact system
is a spring loaded approach to
the I/O connector. Inherently the
system is very forgiving of large
mating tolerances and boasts a
low total application cost. Using
this proven contact system Tyco
Electronics has 12 and 16 pos.
standard connectors available.
The connector system uses
solderless compression in-phone
“pad” and cradle cable plug
“snake” contacts. The plug con-
sists of full load cradle and cable
connectors as well as charging
plugs. The connector system can
be keyed for individual customer
applications. Tyco Electronics
Snake and Pad connectors are
highly reliable cellular intercon-
nect solutions, used in millions
of handsets.
Material and Finish
Insulator:
LCP, glass-filled, black color
Contact Pin:
Phosphor bronze
Contact Plating:
Selectively plated gold over
nickel at contact position,
tin over nickel at solder area
Locking Springs:
POM, black color
Documentation
Drawing:
C-See table
Product Specification:
108-19184
Test Report:
501-19044
Application Specification:
114-19060
Part
Number
Package
Quantity
(Pieces)
No. of
Pos. Type Application
PCB
Thickness
(mm)
5338980-1 2250 per Box 2 Plug Cable – – – – X X
5338979-1 2250 per Box 12 Plug Desktop Stand – – – – X –
5338979-2 2250 per Box 12 Plug Cable – – – – X –
5338982-1 1750 per Box 16 Plug Desktop Stand – ––––X
5338982-2 1750 per Box 16 Plug Cable – ––––X
338966-9 250 per Box 12 Receptacle N/A 0.9✱XX–––
1-338967-2-250 per Box 16 Receptacle N/A 1.2✱X–X––
✱) Other PCB thickness can be made available upon request.
Mates with
5338980 5338979 5338982 338966 338967
2 Pos. 12 Pos. 16 Pos. 12 Pos. 16 Pos.
8.75 8.4
6.0
4.35
2.4
29.9
25.7
35.4
14.2
26.8
0.7 typ.
1.65 max.
1.1 typ.
5.0
5.3
2.75 ∅ 3.7
5.23.3
Multi Media Interface Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
22
Multi Media Interface
Connector
Features
This small versatile Multi Media
Interface Connector supports
various digital data/audio appli-
cations.
Proprietary metal shell side
lock provides superb EMI per-
formance as well as mechanical
robustness.
Various cable assemblies are
provided to support many mobile
electronics applications.
Material and Finish
Insulator:
Thermoplastic, UL 94 V-0, black color
Contact Pin:
Copper alloy
Contact Plating:
1.0 µm min. nickel underlayer,
0.1 µm min. gold at mating side,
0.01–0.2 µm gold at solder tin
Shell Plating:
0.5 µm min. tin plating
Documentation
Drawing:
See table
Product Specification:
See table
Test Report:
See table
PCB Layout
(for reference only)
Package
Quantity
(Pieces)
Part
Number
Pitch No.
of Pos. Type Height
(mm) Style Description Comment
Plug N/A N/A Plug Assy for Ear Phone Connector 1612633-1 150 per Tray –
3.0 DIP Receptacle Assemby for Ear Phone 1612634-1 1500 per Reel –
3.0 SMT Receptacle Assy for Ear Phone Jack Connector 1674432-1 1200 per Reel –
10 Receptacle 3.2 DIP Rec. Assy for Ear Phone Connector onboard reverse 1827349-1 1500 per Reel Reversed
1.4 DIP Receptacle Assy for Ear Phone Connector off 1674787-1 1500 per Reel Inboard
0.5 2.4 DIP Receptacle Assy for Ear Phone Connector off 1747124-1 1200 per Reel Inboard
2.4 DIP Receptacle Assy for Ear Phone Connector off 1746223-1 1500 per Reel Inboard, reversed
12 Plug N/A N/A Plug Assy for MMIC 1746717-1 110 per Tray –
Receptacle 3.0 SMT Receptacle Assy for MMIC 1746716-1 600 per Reel –
14 Plug N/A N/A Plug Assy for DC Cable 1717169-1 110 per Tray –
Receptacle 3.0 DIP Emboss Assy for MMIC Receptacle 1717312-1 600 per Reel –
MMI Connectors
7.25
3.0
3.0 2.5
6.2 8.0
1.4 4.0
3.95
7. 5 6.7 4.0 6.2 9.0
7. 5
8.5
6.2
5.3 2.0
1. 0
0.3
1. 5
0.18
0.5 typ.
0.95 0.2
4.5
8.15
7.05
1.9 1. 3
1.1
1.1 0.3
0.5
0.5 typ.
MDIC and S-MDIC Connector System, 12 Positions
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 23
MDIC and S-MDIC
Connector System,
12 Positions
Features
The MDIC and S-MDIC I/O
connector systems are further
decreasing the size of common
I/O interfaces.
This 12 positions connector
system is highly miniaturized
and features a receptacle height
as small as 2.0 mm.
Small Size (L x W x H):
6.0 x 7.2 x 2.5 mm (S-MDIC)
7.15 x 8.7 x 2.0 mm (MDIC)
Packaged in Tape and Reel
Material and Finish
Insulator:
Thermoplastic acc. UL 94 V-0
Contacts:
Copper alloy 0.3 µm gold over
1.3 µm nickel in contact area.
Gold-flash in other areas.
Shell:
SUS nickel plated 2.0 µm min.
Description Part Number
Pitch
(mm)
Height
(mm) Package Quantity
S-MDIC Receptacle 0.4 2.5 368560-1 1000 per Reel
S-MDIC Receptacle, Reversed 0.4 2.5 368565-1 1000 per Reel
S-MDIC Plug 0.4 N/A 368555-1 1750 per Tray
MDIC Receptacle 0.5 2.0 1827541-1 1000 per Reel
MDIC Plug 0.5 N/A 1827546-1 1110 per Tray
Receptacle Plug
S-MDIC as shown
6.5 4.0
10.3
4.5
1.85
8.2 7. 2 7. 5 6.55
8.5
3.5
1. 5
6.7
2.53 3.15 2.0 3.0
3.5
0.4 typ.
0.12
0.8
0.8 typ.
0.2
0.15
HDMI Connectors, Type C
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
24
HDMI Connectors, Type C
Features
New reduced form factor
connector for small portable
devices such as camcorders,
still cameras and mobile
phones.
Compliant with HDMI version
1.3 specification.
These HDMI connectors are on
the approved connector list.
Material and Finish
Insulator:
Thermoplastic acc. UL 94 V-0,
color black
Contact:
Copper alloy
Shell:
Copper alloy
Pick and Place Feature:
Polyamide tape
PCB Layout
11.2
8.5
10.85
14.0
10.4
10.85
7.2
4.7
30.0
7.4
3.45
2.1
2.3
1. 0
0.35
6.5
9.0 8.4
0.375 typ.
1.0 typ.
1.1 typ.
0.8 typ.
0.2 typ.
0.4 typ.
2.42
Memory Card Connectors
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25
Memory Card Connectors
Features
Tyco Electronics offers a wide
range of memory card connectors
in several variations.
Material and Finish:
See drawing
Documentation
Drawing:
See table
Product Specification:
See table
Part NumberType
Package
Quantity
(Pieces)
Ejection
Type
Card
Detection
Switch
Write
Protect
Switch
Standoff Packaging Product
Specification
SD 0-1470139-1 40 per Tray P-P Y Y 0 0.70 Long Tray 108-57127
0-1470139-2 32 per Tray P-P Y Y 0 0.70 Short Tray 108-57127
0-1470139-3 300 per Reel P-P Y Y 0 0.70 T&R 108-57127
0-1734234-1 45 per Tray P-PI Y Y 0 0.85 Tray 108-57127
0-1734234-2 500 per Reel P-PI Y Y 0 0.85 T&R 108-57127
0-1734234-3 45 per Tray P-PI Y Y 0 0.40 Tray 108-57127
0-1734234-4 500 per Reel P-PI Y Y 0 0.40 T&R 108-57127
0-1734472-1 40 per Tray P-P Y Y 0 0.70 Long Tray 108-57127
0-1734472-2 32 per Tray P-P Y Y 0 0.70 Short Tray 108-57127
0-1734472-3 300 per Reel P-P Y Y 0 0.70 T&R 108-57127
1-1734472-1 ✱40 per Tray P-P Y Y 0 0.70 Long Tray 108-57127
1-1734472-2 ✱32 per Tray P-P Y Y 0 0.70 Short Tray 108-57127
1-1734472-3 ✱300 per Reel P-P Y Y 0 0.70 T&R 108-57127
0-1871250-3 220 per Reel P-P Y Y 0 0.55 T&R 108-78220
0-1871250-4 220 per Reel P-P Y Y 0 0 T&R 108-78220
0-1871583-1 ✱✱ 280 per Reel P-P Y Y 0 0.55 T&R 108-78220
0-1871583-2 ✱✱ 281 per Reel P-P Y Y 0 0 T&R 108-78220
0-1871583-3 282 per Reel P-P Y Y 0 0.55 T&R 108-78220
0-1871583-4 283 per Reel P-P Y Y 0 0 T&R 108-78220
0-0440297-1 48 per Tray P-P Y Y 0 0.85 Tray 108-57127
0-0440297-2 500 per Reel P-P Y Y 0 0.85 T&R 108-57127
0-0440297-3 48 per Tray P-P Y Y 0 0.45 Tray 108-57127
0-0440297-4 500 per Reel P-P Y Y 0 0.45 T&R 108-57127
SD Reverse 0-1775059-1 250 per Reel P-P Y Y 0 0.50 T&R 108-57504
0-1775012-1 250 per Reel P-P Y Y 1.2 0.50 T&R 108-57504
0-1775067-1 250 per Reel P-P Y Y 0 0.50 T&R 108-57504
0-1871916-1 200 per Reel P-P Y Y 0 0.45 T&R –
0-1903302-1 180 per Reel P-P Y Y 0 0.45 T&R –
Memory Stick 0-1674162-1 45 per Tray P-P Y N 0 0.80 Tray 108-57340
0-1674319-1 54 per Tray P-P N N 0 0 Tray 108-57340
0-1470332-1 72 per Tray P-PI N N 0 0.60 Tray 108-57238
0-1717431-1 54 per Tray P-P N N 0 0 Tray 108-57340
XD 0-1470864-1 50 per Tray P-PI N N 0 0.45 Tray 108-57432
T-Flash 0-1827034-1 1100 per Reel P-P N N/A 0 0 T&R 108-78224
Mini SD 0-1775204-1 750 per Reel P-P Y N/A 0 0.5 T&R 108-57589
Micro SD 0-1871602-1 1000 per Reel P-P Y N/A 0 0 T&R 108-78337
0-1871602-2 1000 per Reel P-P Y N/A 0 0.45 T&R 108-78337
MMC 0-0338610-1 1350 per Reel P-PI N N/A 0 0 T&R 108-19173
✱) Full cover ✱✱) Reversed reflow possible
Height
Location Pin
(mm)
Micro SD Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
26
Micro SD Connector
Features
The Micro SD socket has an easy-
to-use push-push connection. It
is equipped with a mechanism we
created in-house that maintains
sufficient card ejection stroke
while preventing the card from
popping out. Also, it provides
high reliability in a compact low
profile shape with a durable card
detection switch built-in and it
holds contact securely. The Micro
SD/SD adapter achieves long-
lasting high operability by using
an internal construction that
prevents flexing and other
stresses on the case from being
conveyed to contacts.
Micro SD Socket
• Excellent insertion click
• Rugged connectivity maintains
connections
• Supports embossed packaging
Micro SD/SD Adapter
• Hook spring mechanism makes
clear click connection
• Comes with socket
• Any label design modification
is possible
• Equipped with write protect key
Material and Finish
Insulator:
Thermoplastic, black color
Contact:
Copper alloy, gold over nickel plated
Shell:
Copper alloy, gold over nickel plated
Coil:
SWP
Cam Rod:
SUS
Hook Spring:
SUS
Documentation
Drawing:
C-1871602
Product Specification:
108-78337
Test Report:
501-5756
Part No. 1871602-1 without Locating Pin
Part No. 1871602-2 with Locating Pin
14.6
1.7 1.35
2.5
14.3 15.3 16.0
1.73
Micro SD/SIM Combi Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 27
Part No. 368637-3
Package Quantity:
600 Pieces per Reel
Micro SD/SIM Combi
Connector
Features
This connector combines a
Micro SD memory slot with a
SIM card connector on top of it.
Besides of the enormous space
savings this brings, the connector
also includes features like shield-
ing test points and of course
push-push ejection system and
a card detection switch.
Material and Finish
SIM Contact:
Copper alloy, plated gold over nickel
Insulator:
Thermoplastic, black color
Micro SD Contact:
Copper alloy, plated gold over nickel
Switch Contacts:
Copper alloy plated gold over nickel
Cam Slider:
Thermoplastic, black color
Cam Hook Spring:
Stainless steel
Camrod:
Stainless steel
Coil Spring:
Piano wire nickel plated
Bottom Shell:
Copper alloy, nickel plated
Top Shell:
Copper alloy, gold over nickel plated
Documentation
Drawing:
C-368637
Product Specification:
108-61079
Test Report:
501-61050
17.3
8.0
17.6 19.7
3.0
1.1 typ.
0.4
2.8
0.6 1. 51. 3
PCB Layout
16.3
14.28
11.0
18.85
3.4
1. 8
1. 9 1.27
1. 1
1.45
0.65
0.95
Micro SD Adapter
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
28
Micro SD Adapter
Features
This adapter allows the Micro SD
card to be read in a normal
SD card slot. The adapter is
equipped with a spring which
provides required retention force
for the Micro SD card.
Custom labeling can be provided
on demand.
Material and Finish
Insulators:
Thermoplastic
Contacts:
Copper alloy selective gold plated
Spring:
Stainless steel
Label:
PET
Documentation
Drawing:
C-1903290
Product Specification:
108-78355
Description Part Number Package Quantity
Micro SD Adapter with Soft Case 1903290-1 60 Tray
Spring Probe Connector (SPC), 1 Position
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 29
6.26 6.26 6.76 7.26 7.76 0.3 0.8 +/- 0.2 2 1.5 1.9
3.10 3.20 3.60 4.00 4.20 0.3 0.8 +.6 -0.2 – 1.5 1.9
6.10 6.20 6.60 7.10 7.60 0.5 0.9 +/-0.3 – 1.5 1.8
5.13 5.68 6.08 6.70 6.88 0.3 N/A 1.3 1.5 2.3
5.00 5.10 5.45 6.00 6.50 0.3 0.9 +/- 0.3 – 1.5 1.8
7.60 7.75 8.15 8.65 9.15 0.3 0.9 +/- 0.3 – 1.5 1.8
7.30 7.40 7.80 8.30 8.80 0.3 0.9 +/- 0.4 – 1.5 1.8
4.90 – 5.47 – 6.10 N/A 1 – 001.175 001.175
7.35 7.90 8.40 8.90 9.40 0.6 N/A 1.8 1.5 02.65
Height / Length (mm) Force (N) Force (N)
Body
Height
Max.
Compression
Height
Working
Height
Min.
Compression
Height
Un-
compressed
Height
Min.
Diameter
Min.
Force
Nominal
Force
Max.
Force
Max.
Diameter
Spring Probe Connector
(SPC), 1 Position
Features
Spring Probe Connectors require
very small space on printed circuit
board.
Spring Probe Connectors can be
used for battery connections as
well as antenna, shielding and
many other applications.
A wide variety of pin count,
size, and soldering interfaces are
available.
Please contact your sales for
more details.
Material and Finish
Plunger:
Brass
Body:
Brass
Spring:
Piano wire
Contact Plating:
Nickel underlayer,
0.1 µm min. gold plating
Spring Fingers
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
30
820 0-1447009-5 5000 per Reel 2.0 0.8 0.3–0.5 Cu Alloy Au Au 108-78123 501-78113
915 0-1483748-1 5000 per Reel 1.5 0.8 0.6–0.3 Cu Alloy Au Au – –
1312 0-1447009-6 5000 per Reel 1.2 1.3 0.7–1.0 Cu Alloy Au Au 108-78135 501-78123
1410 1-1447360-1 5000 per Reel 1.0 1.4 1.05–1.30Cu Alloy Au Au 108-78174 501-78159
1511 0-1565158-1 5000 per Reel 1.1 1.5 0.95–1.30Cu Alloy Au Au 108-57850–
1520 0-1746136-1 5000 per Reel 2.0 1.5 0.6–1.0 BeCu Au Au – –
1608 0-1565322-1 5000 per Reel 0.8 1.6 1.1–1.4 Cu Alloy Au Au 108-57860–
1715 0-1447360-9 5000 per Reel 1.5 1.7 0.9–1.3 Cu Alloy Au Au 108-78143 –
1895 0-1857724-4 5000 per Reel 0.95 1.8 1.5–1.0 Stainless Steel Au Au – –
3025 Z1-T 0- 440432-1 2500 per Reel 2.5 3.0 1.0–2.5 Cu Alloy Sn Au 108-57169 501-57159
3025-Z1T2 0-1734300-1 2500 per Reel 2.5 3.0 0.8–3.0 Cu Alloy Sn Au 108-57507 501-57581
3525A 0-1447009-8 2000 per Reel 2.5 3.5 2.0–3.0 Cu Alloy Au Au 108-78162 501-78162
4025 0-1437259-6 2000 per Reel 2.5 4.0 2.0–3.5 Cu Alloy Ni Ni 108-78156 501-78141
404025C-T 0-1720028-2 2000 per Reel 2.5 4.0 0.8–3.2 Cu Alloy Sn Sn 108-57507 501-57581
5025T 0- 440423-1 1500 per Reel 2.5 5.0 2.0–4.0 Cu Alloy Au Au – –
6525 0- 440430-1 1200 per Reel 2.5 6.5 4.0–6.5 Cu Alloy Sn Au 108-57130 501-57110
Description Part
Number
Package
Quantity
(Pieces)
Width
(mm)
Uncompressed
Height
(mm)
Effective
Height
(mm)
Base
Material
Plating
Solder
Area
Plating
Contact
Area
Product
Specification
Test
Report
Spring Fingers
Features
Spring Fingers provides highly
reliable connection in many
applications such as shielding,
cconnection to vibration motors,
antennas, speakers and micro-
phones.
Our large portfolio contains
products with several mating
heights and plating variants.
Material and Finish
Contact Pin:
Copper alloy
Contact Plating:
See table
Documentation:
Drawing:
See table
Product Specification:
See table
Test Report:
See table
LCD ITO Connector, 8 Positions
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 31
LCD ITO Connector,
8 Positions
Features
8 positions ITO connector for
chip on glass technology. The
connector is being glued to the
LCD, using an anisotropic con-
ductive film. The compressive
part of the connector is used for
contacting the PCB.
Material and Finish
Insulator:
Thermoplastic resin, black color
Contact Pin:
Copper alloy
Contact Plating:
0.25 µm gold min. over
1.3 µm nickel in contact zones.
Documentation
Drawing:
C-338970
Product Specification:
108-19189
Test Report:
501-19047
Application Specification:
114-19061
Part No. 338970-1
Package Quantity:
1300 Pieces per Reel
16.0
8.05
0.6
3.2
1. 8
3.5
4.5
0.4 1.15 typ.
LCD Connector 0.65 mm, 10 Positions
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
32
LCD Connector 0.65 mm,
10 Positions
Features
The connector is SMD soldered
to the main board and provides a
stable and reliable connection by
compressive contacts with the
LCD module.
Material and Finish
Insulator:
Glass-reinforced LCP, black color
Contact Pin:
BeCu Copper alloy
Bracket:
BeCu Copper alloy
Contact Plating:
0.5 µm gold min. over 1.3 µm nickel
in contact zone. Other area’s flash
gold over 1.3 µm nickel.
Documentation
Drawing:
C-1705536
Product Specification:
108-19269
Part No. 1705536-2
Package Quantity:
1900 Pieces per Reel
6.8
2.15
5.35
2.1
0.62
1.1
1.5
1.2
1.4
0.9
0.78
1.64
0.8
17.15
13.5
5.18
1.5 typ.
17.4
9 x 1.5 = 13.5
16.7
4.85
7.17
PCB Layout
Standard Switching Coax
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 33
Standard Switching Coax
Features
These switching coax connectors
are used for testing and setting
the power of the phone on the
production lines but also to make
external switched connection in
a car kit application to use an
external antenna.
The deep drawn outer shell
allows a misalignment tolerance
capture up to 1.0 mm in all
direction.
This system allows up to 20.000
mating/switching cycles.
3 different height available:
6.0 mm, 4.5 mm and 3.5 mm
(only 0.5 mm tolerance capture).
Coplanarity: 0.1 mm
Material and Finish
Dielectric:
PEEK, natural color
Outer Shell:
Steel gold plated
Switch Contacts:
Stainless steel, selective plated
Center Pin:
Brass, gold plated
Documentation
Drawing:
C-619061, C-61062 and 619072
Product Specification:
108-71000
Test Report:
501-19028
Dimension A
(mm)
Part Package Quantity
Number (Pieces)
6.0 619061-1 1200 per Reel
4.5 619062-1 1600 per Reel
3.5 619072-1 1600 per Reel
Recommended PCB Layout
3.1 2.4
2.7
3.8
4.3
1.7
0.1
8.0
∅ 5.4
∅ 3.4
∅ 0.6
3.2
3.7
0.8 3.1
2.7
2.4
0.9
2.5
Dim. A 4.6 4.0
3.7 3.0
Standard Switching Coax Test Adapters
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
34
Standard Switching Coax
Test Adapters
Features
Test adapters are used in Test
Jigs on mobile phone production
lines to connect smoothly to the
PCB Jack switch.
This system allows a minimum
of 100,000 cycles mating cycles.
Applicable up to 3 GHz.
Material and Finish
Dielectric:
PTFE
Outer Shell:
CuBe or similar, gold plated
Center Contact:
CuBe or similar, gold plated
Documentation
Drawing:
C-619052, C-619068
Product Specification:
108-71000
Test Report:
501-19028
Part No. 619052-1
35.0
22.0
7. 0
13.0
6.62
∅3.4
5.47
∅10.0
1/4″–36 UNS-2A
∅6.5
Part No. 619052-1
35.0
22.0
7. 0
13.0
6.62
∅3.4
5.47
∅10.0
1/4″–36 UNS-2A
∅6.5
∅8.18
2.5
2.5
Standard Switching Coax Right-Angle Cable Plug
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 35
Standard Switching Coax
Right-Angle Cable Plug
Features
Right-Angle cable plugs are used
mainly for car kit application
but can also be used in test jigs
instead of test adapters.
The integrated floating system
allows smooth connection, able
to capture tolerances up to
1.0 mm misalignment between
phone and car kit with any risk
of damaging the mobile phone.
A minimum of 20,000 mating
cycles can be done with this
system.
Various form and length can be
offered.
Cable to be used: RG 174, RG 316.
Material and Finish
Dielectric:
PEEK
Outer Shell:
CuBe or similar, gold plated
Center Contact:
CuBe or similar, gold plated
Documentation
Drawing:
C-619078, C-619028
Product Specification:
108-71000
Test Report:
501-19028
Part No. 5-619078-2
Package Quantity: 500 Pieces
Part No. 5-619028-2
Package Quantity: 500 Pieces
20.3
14.9
11.0
15.6
12.1
10.92
6.62
For further models, please contact Tyco Electronics
∅3.3
∅3.4
5.47
∅3.9
1.65
∅3.7
∅9.6
3.4
3.4
3.1
Standard Switching Coax with ESD Proctection
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
36
Standard Switching Coax
with ESD Proctection
Features
These switching coax connectors
are used for testing and setting
the power of the phone on the
production lines but also to make
external switched connection in
a car kit application to use an
external antenna.
This 3 connector types offer in
addition an ESD protection which
means that as long as the PCB
connector is not connected to a
test connector or a cable connec-
tor, the center contact actuating
the switch is grounded. The
outer shell allows also a mis-
alignment tolerance capture up
to 1.0 mm in all direction.
This system allows up to 20.000
mating/switching cycles.
Two version available:
Height of 6.3 mm and 4.1 mm
Coplanarity: 0.1 mm
Material and Finish
Dielectric:
PEEK, natural color
Outer Shell:
Steel gold plated
Switch Contacts:
Stainless steel, selective plated
Center Pin:
Brass, gold plated
Documentation
Drawing:
C-619201 and 619231
Product Specification:
108-71053 and 108-71063
Test Adapters and Cable Plugs to be used for all Standard switching Coax with ESD protection:
Same as for Standard Switching Coax.
4.1 5.0 619201-1 1600 per Reel –
619231-1 1600 per Reel In/Out 180° rotated
Part Package Quantity Comment
Number (Pieces)
Height Diameter
(mm) (mm)
Recommended PCB Layout
∅5.8
∅3.4
0.97
0.8
0.65
1.35
1.75
0.8
1.75
∅5.0
∅4.4
∅5.8
1. 8
3.8
∅0.56
1.0
(4x)
4.0
1.0
(4x)
MID Micro Switching Coax
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 37
MID Micro Switching Coax
Features
This very small switching coax
connector is used for testing and
setting the power of the phone
on the Mobile Phone production
lines.
Applicable up to 6 GHz.
This connector using MID tech-
nology has only two components
and allows a coplanarity value of
max 0.08 mm.
PCB surf. need: 3.0 x 3.0 mm
Height: 2.5 mm
Two types of mating connector
offered:
• Press-on for test jigs
• Snap-on for hand testing
Material and Finish
Dielectric / Outer Shell /
Second Signal Contact:
Two shot molded LCP selectively
gold plated
Switch Contacts:
Stainless steel, gold plated
Documentation
Drawing:
C-619196, C-619210, C-619211
Product Specification:
108-71062
SMD Switch: Part No. 619196-1
Package Quantity: 1,000 Pieces per Reel
Right-Angle Cable Plug with Snap Fingers:
Part No. 5-619211-1
Test Adapter: Part No. 619210-1
Package Quantity: 50 Pieces per Box
Recommended PCB Layout
∅3.0 3.0
2.5
1.54
3.2
3.4
0.8 (4x)
1.7
0.66
0.66
1.12
0.92
0.46 0.46
3.0
1. 3
MID Nano Switching Coax
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
38
MID Nano Switching Coax
Features
This very small switching coax
connector is used for testing and
setting the power of the phone
on the Mobile Phone production
lines.
Applicable up to 6 GHz.
This connector using MID tech
nology has only two components.
By having the switch contact
mounted inside the connector,
only the MID outer shell is touch-
ing the PCB. This allows remark-
able coplanarity value of max.
0.06 mm.
PCB surf. need: 2.7 x 2.7 mm
Height: 1.7 mm
Two types of mating connector
offered:
• Press-on for test jigs
• Snap-on for hand testing
Material and Finish
Dielectric / Outer Shell /
Second Signal Contact:
Two shot molded LCP selectively
gold plated
Switch Contact:
Stainless steel, gold plated
Documentation
Drawing:
C-619213, C-619214, C-619217
Product Specification:
108-71065
SMD Switch: Part No. 619213-1
Package Quantity: 8,000 Pieces per Reel
Snap-On Test Adapter: Part No. 619217-1
• Spring loaded center contact
Test Adapter: Part No. 619214-1
• Spring loaded outer conductor
• Spring loaded center contact
∅0.55
2.7
2.7
∅1. 9
1. 7
0.65
2.95
1. 0
1.15
1.5 5
0.93
2.0
2.9
0.4
0.4
0.55
Recommended PCB Layout
Spring Probe Connector (SPC)
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 39
Spring Probe Connector
(SPC)
Features
Spring Probe Connectors are
widely used in the electronics
industry. In mobile equipment
they can be used in several
applications such as antenna,
charging/power, shielding and
many other applications.
Their proven design provides
several advantages:
• Relatively large stroke
• Small Printed Circuit Board
usage
• Spring action in only one direc-
tion (direction of movement)
The Tyco Electronics spring probe
connector portfolio contains a
vast variety of products with
several heights, strokes, building
styles (verticall or right-angle),
pin counts and pitches.
Material and Finish
Insulator:
Thermoplastic, black color
Probe Pin:
Brass
Body:
Brass
Contact Plating:
Nickel underlayer, 0.1 µm min.
gold plating
Documentation
Drawing:
See table
Product Specification:
See drawing
No. of
Positions
1746730-1 1000 per Reel 3.00 3.30 0.90 Vertical (180°) Rotating (hinged)
1746750-1 1500 per Reel 3.00 3.70 0.90 Vertical (180°) Rotating (hinged)
1279154-1 1000 per Reel 3.60 4.45 1.20 Vertical (180°) Rotating (hinged)
0900971-1 1000 per Reel 4.00 5.00 1.40 Vertical (180°) Rotating (hinged)
1612681-1 1000 per Reel 3.60 5.00 1.40 Vertical (180°) Rotating (hinged)
20900905-1 1000 per Reel 3.60 5.00 1.40 Vertical (180°) Rotating (hinged)
1746931-1 1000 per Reel 3.00 5.10 0.90 Vertical (180°) Rotating (hinged)
0900795-1 1000 per Reel 4.00 5.70 1.50 Vertical (180°) Rotating (hinged)
0900965-1 1000 per Reel 3.60 6.40 1.40 Vertical (180°) Rotating (hinged)
0900712-1 1000 per Reel 3.00 6.90 1.50 Vertical (180°) Rotating (hinged)
1705254-1 2060 per Reel 3.10 2.80 2.30 Right-Angle (90°) Sliding & hinged
1612493-1 1000 per Reel 3.00 3.95 1.40 Vertical (180°) Rotating (hinged)
1746751-1 1500 per Reel 3.00 5.50 1.50 Vertical (180°) Rotating (hinged)
1717400-1 1000 per Reel 4.00 6.30 1.40 Vertical (180°) Rotating (hinged)
1746116-1 1000 per Reel 4.60 6.35 1.25 Vertical (180°) Rotating (hinged)
3 1747103-1 1000 per Reel 3.45 4.15 1.70 Right-Angle (90°) Sliding & hinged
1717017-1 1000 per Reel 3.85 4.60 1.65 Right-Angle (90°) Sliding & hinged
1717257-1 1000 per Reel 3.50 3.95 1.40 Right-Angle (90°) Sliding & hinged
1717029-1 1000 per Reel 3.50 4.43 1.70 Right-Angle (90°) Sliding & hinged
1717294-1 1000 per Reel 2.60 4.75 1.60 Right-Angle (90°) Sliding & hinged
1705130-1 1500 per Reel 2.50 5.00 1.50 Vertical (180°) Rotating (hinged)
1705030-1 1500 per Reel 2.54 3.60 1.00 Vertical (180°) Rotating (hinged)
41705795-1 1250 per Reel 2.54 5.60 1.50 Vertical (180°) Rotating (hinged)
0900688-1 1000 per Reel 4.00 5.50 1.40 Vertical (180°) Rotating (hinged)
0900988-1 1000 per Reel 4.00 5.50 1.50 Vertical (180°) Rotating (hinged)
1674783-1 1000 per Reel 4.00 5.70 1.50 Vertical (180°) Rotating (hinged)
1483960-1 1500 per Reel 2.54 4.10 1.00 Vertical (180°) Rotating (hinged)
1377269-2 1500 per Reel 2.54 5.00 1.50 Vertical (180°) Rotating (hinged)
1674977-2 1500 per Reel 2.90 5.15 1.25 Vertical (180°) Rotating (hinged)
5 1483940-1 1500 per Reel 2.54 5.20 1.40 Vertical (180°) Rotating (hinged)
1674977-1 1400 per Reel 2.90 6.65 1.25 Vertical (180°) Rotating (hinged)
1717989-1 1000 per Reel 3.70 2.90 1.65 Right-Angle (90°) Sliding & hinged
1746773-1 1000 per Reel 3.50 3.65 1.70 Right-Angle (90°) Sliding & hinged
Part
Number
Package
Quantity
(Pieces)
Pitch
Contact
Height
(Free)
Stroke Mating Type Battery Mating
Generic Battery Connector, 2 Positions
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
40
Generic Battery Connector,
2 Positions
Features
Our Generic 2 positions SMT
Battery Connector has an industry
proven contact design that can
be used in a wide variety of appli-
cations. Two contacts can be
used for one pad for redundancy
reasons.
Its small size and low cost make
this connector ideal for low to
medium volume requirements.
This connector is also “in-line”
stackable for multi position
requirements.
Material and Finish
Insulator:
LCP, glass-filled, black color
Contact Pin:
Phosphor bronze
Contact Plating:
Selectively plated gold over nickel
and tin on solder beam
Documentation
Drawing:
C-6337194
Product Specification:
108-3419
Test Report:
GB 39-99
Application Specification:
114-3211
Part No. 6337194-1
Package Quantity:
550 Pieces per Reel
Recommended
PCB Layout
6.2
4.1
7.0
7.0
4.25
1.0
1.05
0.6
4.25 1.85
1.8
2.05
6.8
3.4
2.8
2.2
7.05
4.8
2.0
1.5
0.850.4
1.0
0.7
1.6 mm Pitch Low Profile Battery Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 41
1.6 mm Pitch Low Profile
Battery Connector
Features
Because of their low cost, relia-
bility and high current capacity,
Leafspring connectors are
ultimately suitable for battery
connections. This connector
series features a low housing
height of 2.1 mm min.
The product can be used with
hinged or slided batteries and
can carry up to 2 A at 250 V AC.
Material and Finish
Insulator:
Thermoplastic, black color,
LCP or equivalent UL 94 V-0
Contact Pin:
Copper alloy
Contact Plating:
0.38 µm gold plating on contact
area, gold-flash on solder area over
1.27 µm nickel
Documentation
Drawing:
C-See table
Product Specification:
108-60035
Test Report:
501-5629
No. of
Positions
Pitch
(mm)
Housing
Height
(mm)
Part Number
Package
Quantity
(Pieces)
4 1.6 2.5 3.75 292331-1 1500 per Reel
2 1.6 2.5 3.75 292331-2 1500 per Reel
3 1.6 2.5 3.75 292331-3 1500 per Reel
5 1.6 2.5 3.75 292331-5 1500 per Reel
3 3.0 2.1 3.65 292448-1 1500 per Reel
Bold Part Numbers have been tooled.
Total Height
Uncompressed
(mm)
Recommended
PCB Layout
4.33
7.0
2.5
1.6 typ. 0.6
1.0
1.2
1.2
1.25
1.6
1.00.8
4.8
1.25
0.1
0.15
Right-Angle Leaf Spring Battery Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
42
No. of
Positions
1717273-1 500 per Reel 3.0 3.9 6.3 10.5 x 8.6 Ni + Au
1717406-1 500 per Reel 3.0 5.0 7.7 10.5 x 7.4 Ni + Au
1717413-1 500 per Reel 3.0 4.5 6.9 10.5 x 7.4 Ni + NiPd + Au
1717562-1 500 per Reel 3.0 4.5 6.9 10.5 x 7.4 Ni + NiPd + Au
1717838-1 40 per Tray 6.5 6.6 11.5020.0 x 5.0 Ni + Au
3 1746142-1 500 per Reel 3.2 3.5 6.5 12.4 x 3.7 Ni + Au
1747129-1 500 per Reel 3.0 4.4 6.7 10.3 x 4.9 Ni + NiPd + Au
1827000-1 40 per Tray 6.5 10.4017.1019.9 x 2.6 Ni + Au
1827928-1 400 per Reel 3.0 05.75 7.6 11.2 x 2.5 Ni + Au
1871813-1 500 per Reel 2.7 3.9 6.0 10.3 x 4.7 Ni + NiPd + Au
Part
Number
Package
Quantity
(Pieces)
Pitch
Contact
Height
(mm)
Total
Height
(mm)
Mount Size
Width x Depth
(mm)
Finish
Right-Angle Leaf Spring
Battery Connector
Features
Right-Angle Leaf Spring Battery
Connector provides reliable
battery interconnection for mobile
handset application.
Typical part numbers are shown
below.
For the custom sizes, please
contact Tyco Electronics sales.
Material and Finish
Insulator:
6T PA, UL 94 V-0, black color
Contact Pin and Solder Pegs:
Copper alloy
Contact Plating:
1.27 µm min. nickel underlayer,
1.0 µm min. gold at contact side
0.05–0.13 µm gold at solder side
Solder Peg Plating:
1.0 µm min. nickel underlayer,
1.0 µm min. tin plating
Documentation
Drawing:
See table
Product Specification:
See drawing
Recommended PCB Layout
12.0
11.0
7.5
10.9
0.7 1.2
1.0
3.0
7.4
7.9
∅1.2
9.6 Ref.
10.5
5.0
2.2
1.72
2.4
1.9 1. 8
6.9 6.3
3.9
1.8
1.5
3.0
2.2
3.2
2.0
Battery Block
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 43
Battery Block
Features
This battery concept allows for a
stable battery connection in any
circumstances. The plug side,
which is mounted in the equip-
ment, connects to the special
connector in the battery.
The battery side connector is
equipped with two contact points
per contact. The U-shaped
contact always keeps the forces
in the connector. The special
construction of the connector
allows for hinged or sliding
mating of the battery pack.
The small size of the complete
system makes it ultimately suit-
able for mobile applications.
Material and Finish
Insulator:
Thermoplastic, UL 94 V-0, black color
Contact Pin:
Copper alloy
Contact Plating:
Selectively plated gold over nickel
and gold-flash in solder area
Documentation
Drawing:
C-Part No.
Product Specification:
108-5846
Test Report:
501-5452
Plug:
Part No. 1612898-1
Receptacle:
Part No. 1612901-1
Receptacle: Part No. 1612901-1
Package Quantity:
1700 Pieces per Reel
PCB Layout
PCB Layout
Plug: Part No. 1612898-1
Package Quantity:
75 Pieces per Tube
6.6
3.0
3.0
1. 5
0.6
0.55 2.6
4.0
0.7
0.72.0
1. 2
0.7
∅0.75
7.4
2.0
2.75
2.0
0.55
0.5
1.55
6.5
5.5
4.8
5.3 5.4
4.9
∅0.75
∅1. 4
∅0.8
2.6
1. 6
1. 8
2.0
2.0
0.9
1. 8
3.4 4.4
2.0 2.0
2.2
0.5
5.9
3.8
Inboard SMIA 85 Camera Socket
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
44
Inboard SMIA 85
Camera Socket
Features
Inboard SMIA 85 Camera socket
according to the SMIA standard.
For camera modules with 8.5 x
8.5 mm footprint.
• Fully-shielded camera socket
• Inboard allows for “flat” phone
design
• Grounding fingers to camera
module
• Keying feature and optical
identification feature
• Large pick and place possibility
inside
• Grounding clips
Material and Finish
Insulator:
LCP, black color
Contact Pin:
Phosphor bronze
Contact Plating:
Selectively plated gold over nickel
Shields:
Phosphor bronze
Top Shield Plating:
Selective gold over nickel
Bottom Shield:
Tin over nickel
Documentation
Drawing:
C-1857258
Product Specification:
108-19297
Application Specification:
114-19101
Part No. 1857258-1
Package Quantity:
800 Pieces per Reel
PCB Layout
0.5
0.95
10.2
13.1
11.2 13.8
11.8 8.3 14.1
10.8
10.3
13.3
3.05
5.45
1.1
0.25
0.9
0.8
Onboard SMIA 85 Camera Socket
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 45
Onboard SMIA 85
Camera Socket
Features
Onboard SMIA 85 Camera socket
according to the SMIA standard.
For camera modules with 8.5 x
8.5 mm footprint.
• 4x camera module locking clips
• Grounding to the camera by clips
• Overmolded contacts
• Keying and optical identification
feature
Material and Finish
Insulator:
PA, black color
Contact Pin:
Phosphor bronze
Contact Plating:
Selectively plated gold over nickel
Shields:
Copper alloy
Shield Plating:
Selective gold over nickel
Documentation
Drawing:
C-1857346
Product Specification:
108-19297
Application Specification:
114-19101
Part No. 1857346-1
Package Quantity:
1000 Pieces per Reel
PCB Layout
5.03
10.3
10.0
10.3
9.5
10.55
10.6
9.4
1. 6
0.4
Super Low Profile (SLP) Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
46
Super Low Profile (SLP)
Connector
Features
This super low profile cable-to-
board connector requires very
little space for high density and
small size mobile electronics.
For your one stop shoping,
various cable assemblies are
provided to best suit your appli-
cation.
Applicable Cable
Wire Size: AWG 32
Diameter: 0.39 mm
Material and Finish
Insulator:
Thermoplastic,
Black (Board Connector),
Beige (Receptacle Connector)
Contact Pin:
Copper alloy
Contact Plating:
Board Connector:
1.3 µm min. nickel underlayer,
0.3 µm min. gold at mating side
0.05–0.20 µm gold at solder side
Receptacle Connector:
Gold plating
Shields:
Copper alloy
Shield Plating:
Selective gold over nickel
Documentation
Drawing:
See table
Product Specification:
108-5822
Test Report:
501-5593
Application Specification:
114-5357
Board
Connector
Cable Assembly (Example)
Plug: Part No. 1612537-1
Receptacle: Part No. 1612534-1
5.3
0.3
2.05 3.55
1.1 1.3 3
3.58 1.6 3.9
5.7
3.3
1.6
1.4
0.8
1.7
3.2
2.3
1.5
0.8
PCB Layout
Micro SLP Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 47
Micro SLP Connector
Features
This connector is applied for
interconnection to speakers,
receivers or other small devices
in Mobile equipment.
• Low Profile,
Mating Height = 1.4 mm
• Contact Pitch = 0.8 mm
• Applied Wire Size: AWG 32
• Double slot mass termination
• Double latch concept, contact
and housing
• Special latch design ensures
good tactile feedback
• Size (H x W x L):
1.4 x 2.85 x 4.66 mm
• Design ensures contact
protection during mating
Material and Finish
Insulator:
Thermoplastic resin
Contact Pin:
Phosphor bronze
Contact Plating:
0.3 µm gold over 1.3 µm nickel in
contact area, gold-flash plating in
solder area
Shields:
Copper alloy
Shield Plating:
Selective gold over nickel
Documentation
Drawing:
C-See table
Product Specification:
108-78466
Test Report:
See Product Specification
Application Specification:
114-5426
Cable Assembly
Plug: Part No. x-1981812-x
Receptacle: Part No. 1981813-1
Package Quantity:
4000 Pieces per Reel
2.85
1.1 1. 4
1.0
2.65
2.95 4.7
0.8
1.1
0.7
4.4
1.5
2.85
4.3
PCB Layout
STAX™ LD Elastomeric Connectors
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
48
Product Facts
■Single piece compression
connector
■Contact pitch as lows as
0.8 mm
■No. of rows of contacts:
1 through 5 (two rows shown
to the right)
■No. of Contacts: 1–200
■Board Separation:
0.5–8.0 mm
■Shielding Capability
■Performs in high-speed
applications (3 GHz)
■Low resistance
■Current Capability:
1 Amp typical with higher
capability possible with
modification
■Easily modified standard
designs
■Facilitates automatic
assembly, rework, and field
upgrades
■Compatible with tin and
flash gold contact metallurgy
■Rugged and reliable Dual-Row STAX Connector connects two rows of contact pads. Retention slot is provided in PCB separator.
STAX™ LD Elastomeric Connectors
Surface-to-Surface Compression Connection for Board Stacking Applications
Elastomeric connectors are
viable in most applications
where traditional board-board
connectors are used. The
applications may include high
speed, power, digital, ground-
ing/shielded interconnect.
The elastomer is a single piece
compression technology. The
silicone within the connector
provides the normal force
(spring). The conductive layers
(blend of silicone and silver
particles) make redundant
electrical contact to the pads
on the board.
The STAX LD technology is
based upon 30 years of
experience in manufacturing
and in the hundreds of millions
of connectors used in trouble-
free applications. This is a low
durometer and low contact
resistance product.
Tyco Electronics maintains
complete control over the
quality and performance of the
product. The STAX product
line is manufactured from basic
raw materials (silver or gold,
and silicone) using a proprie-
tary manufacturing process.
The result is a connector
technology that allows the
freedom of design without the
traditional limitations of stand-
ard product availability. There
is no need to compromise
the end product at the design
stage.
Mechanically, the elastomeric
capabilities are flexible. The
technology can meet PCB
area requirements in appli-
cations of board separations
under 8.0 mm. Electrically,
resistance and current ratings
are competitive with most
alternative technologies.
How STAX Elastomeric
Connectors Work
STAX elastomers are zero
insertion force connectors
that do not require soldering.
They provide a compliant
surface-to-surface com-
pression connection when
deflected between opposing
mirror-image pad patterns.
Modifications & Options
The flexible elastomeric
manufacturing process
allows a fast, easy modifi-
cation of the products to
suit the individual needs
of the application. Typically
with an elastomer-only
solution there is no tooling.
There are requirements
for minimum production
volume.
STAX™ LD Elastomeric Connectors (continued)
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 49
application engineers are
avail-able to assist in:
• Defining customer furnish-
ed housing requirements.
• Providing design input for:
•■Alignment
•■Deflection
•■Pad layout
•■Final elastomer dimen-
sions
3. Can Tyco Electronics
supply a complete
Connector Solution?
Yes. These solutions can
take the form of simple
holders with STAX connec-
tors held in place by:
• Localized interference
• In-molding
• Grafting
The holder or frame can be
plastic, silicone rubber, or
metal and typically has low
tooling investment:
Below are examples of
complete connection solutions
in challenging applications.
STAX elastomers are com-
posed of alternating layers of
conductive and non-conduc-
tive silicone rubber. Silicone
rubber is the base material
because it has excellent aging
properties, chemical stability,
electrical reliability, and super-
ior performance in shock and
vibration. It also provides a
gasket-like seal to protect the
contact surfaces.
The conductive layers consist
of tiny metallic particles
dispersed in silicone rubber.
Within each of the conductive
layers, the metallic particles
create thousands of conduc-
tive paths. Therefore, each
conductive layer provides
multiple points of contact at
the substrate interface. While
the conductive layers ensure
contact between mating pads,
the non-conductive layers
isolate the conductive layers
from each other. The alter-
nating STAX construction,
200 conductive layers per inch
(8 per mm), allows multiple
conductive layers to make
contact to a single contact
pad while the non-conductive
layers electrically isolate
adjacent contact pads.
The advantage of this material
construction is that you
achieve 3–4 conductive layers
typically making contact to a
single contact pad on the
board. A single elastomeric
strip (element) is used to con-
nect an entire row of contacts.
The multiple layers coupled
with the thousands of con-
ductive paths in each layer
ensure reliable interconnect.
Why use a
Tyco Electronics
Elastomeric Connector
1 – Simple Implementation
Assembly is easy as making
a sandwich. There is no
soldering, no special tooling
or machinery.
2 – Easily Modified
How often is a standard off-
the-shelf connector ideal for
your application? Smaller
height, higher I/O, greater cur-
rent capacity, lower resistance,
less PCB area are all modifi-
cations that can be made.
3 – Fast
The flexible elastomeric manu-
facturing process allows quick
turn on prototypes (1 week)
to test solutions and rapid
ramp on production. Proto-
types are made with the same
process as production.
4 – No Tooling
An elastomer-only approach
allows the customer to imple-
ment the housing and align-
ment features within existing
plastic or metal structure.
Modifications of elastomer
length, height, and width do
not require tooling.
5 – Reliability
Tyco Electronics elastomeric
products have been tested to
the following:
• MIL STD-1344
• IEC-68-2
• EIA-364
• MIL STD-202
• JIS C 0020
• JEIDA 38
• INTEL SPEC 5.1, 5.2
• NUMEROUS CUSTOMER
ACCELERATED LIFE
TESTING (ALT)
Test data available on request.
6 – Product Support
Tyco Electronics product
engineers work directly with
customer engineering teams
on modifications and custom
solutions for volume applica-
tions. All aspects of the design
and implementation of the
product are reviewed to ensure
a successful product launch.
Custom Capability
Application requirements vary
dramatically across the many
industries that elastomers are
used. The technology is
flexible in adapting to many
of these requirements but, as
with any product, there are
limits.
1. Determine if an
Elastomeric Connector
is appropriate for the
Application
a) Board-Board separation
>8.0 mm?
An elastomer cost is tied
closely to material usage
(precious metals). In appli-
cation greater than 8 mm
elastomers lose their price
competitiveness.
b) X-YAlignment (>±0.25 mm)?
Unlike a mechanical male-
female connector an elas-
tomer cannot perform the
alignment of the system.
The reference drawings
show how pins can provide
satisfactory alignment.
Other methods can achieve
the same result.
c) Sliding Contact?
Silicone by the nature of
the product has a high co-
efficient of friction. Sliding a
contacting surface across
the elastomer will not be
reliable.
d) Contact Pitch: <0.8 mm?
Since an elastomeric con-
nector depends on the align-
ment of the mating surfaces
by an external means, con-
tact pitch <0.8 mm is not
easily achievable. However,
board real-estate is minimi-
zed by achieving more
closely-spaced rows of con-
tacts pads than fine-pitch
connectors.
2. Determine if “holder”
functions can be inte-
grated within existing
structure?
The holder is synonymous
with the plastic that sur-
rounds traditional mecha-
nical connectors. The most
efficient and cost effective
way to implement a STAX
connector is by incorpora-
ting a retaining slot into an
existing housing or board
separator as shown on the
reference designs.
In an approved application,
Elastomeric Technologies
Circular Connector Grafted
160 Pos. (LCP Frame)
Ultra-Low Profile Inmolded
8 Pos. 0.5 mm Height Silicone
Rubber Base
Module-to-Board Grafted
220 Pos. Peripheral Contact
Ultem Frame
STAX™ Array Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
50
STAX™ Array Connector
Features
Allows connection to non-stan-
dard pad patterns without tooling
and long lead time for custom
connector.
• Long term reliability and
durability
• Economical
• One piece connector
• Custom prototype samples
within 1 week
Physical Properties
Height:
0.5–1.5 mm
Minimum Pad Pitch:
0.8 mm
Individual Conductor Width:
0.063 mm
Individual Conductor Length:
0.25 mm
Typical Electrical Properties
Contact Resistance1):
50 mΩ
Dielectric Constant:
3.1
Insulation Resistance1):
1012 Ωmin
Dielectric Withstanding Voltage1):
1000 V without breakdown or arcing
Current Carrying Capacity1):
0.5 A
Deflection Force:
0.5–1.5 Newtons/mm2
Environmental Parameters
Operating Temperature:
–40 ºC to +125 ºC
Moisture:
0 to 100% RH
Test Report:
TR 368
1) Elastomer: 1.0 mm (0.039″) high.
Boards: Gold plated contact pads 0.5 mm
(0.020″) wide on 1.0 mm (0.039″) pitch. Part No. 3-1442003-2
The STAX Array connector is an anisotropic conductive mat material that was developed to
interconnect land grid array pad patterns as well as random, circular or other non-linear circuit
board pad patterns. As long as the material is deflected between two mating mirror image pad
patterns electrical connection is made between the mirror image pads.
Using our core competency in laminating silicone, the Tyco Electronics Elastomeric Technologies
product line has created a mat material having .063 mm (0.0025″) x 0.25 mm (0.010″) conductive
silicone segments surrounded on all sides by 0.063 mm thick nonconductive silicone insulation.
As long as a minimum of 0.4 mm separation is maintained between adjacent pads on the mating
surface, shorting is avoided.
STAX array connectors are very easily customized to the users required dimension and can be
made in either rectangular or die-cut shapes. Z-axis thicknesses between 0.5 mm and 1.5 mm
and dimensions from 2 mm x 2 mm to 60 mm x 60 mm can be accommodated.
Elastiboot™ Connectors for Microphones
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 51
Elastiboot™ Connectors
for Microphones
Features
• Boot and STAX elastomeric
connector are together as one
inseparable piece.
• Elastiboot allows microphone
to be provided as an assembly
complete with acoustic boot
and STAX compression-style
connector.
• Large deflection range of
5 thru 50%.
• Standard Elastiboots available
for smaller industry-standard
leadless microphones of 4.0
and 6.0 mm diameter.
• Elastiboot uses reliable,
superior performing Tyco
Electronics STAX elastomeric
compression connectors.
• Custom, application specific
designs can be created.
Physical Properties
Height:
See chart
Minimum Pad Pitch:
See PCB drawings
STAX Conductor Width:
0.064 mm (.0025″)
STAX Conductor Pitch:
0.127 mm (.005″)
Environmental Parameters
Operating Temperature:
–40 ºC to +125 ºC
Moisture:
0 to 100% RH
Test Report:
TR 341
Elastiboot with Seal Ribs Elastiboot without Seal Ribs
Typical PCB Pattern for
4.0 mm Diameter Microphone
Typical PCB Pattern for
6.0 mm Diameter Microphone
Part Number
Microphone
Outer Diameter/
Thickness
(mm)
STAX Type Seal Ribs
2-1442003-2 4.0 / 1.0 LD Yes 5.17 1.60 5.26
6-1442001-3 4.0 / 1.85 LD No 5.12 2.60 5.37
9-1442002-7 6.0 / 1.0 Gold Yes 7.37 1.35 7.46
5-1442003-9 6.0 / 1.0 LD Yes 7.37 1.35 7.46
1-1442002-5 6.0 / 1.3 SD Yes 7.50 1.70 7.65
9-1442000-8 6.0 / 1.5 SD Yes 7.50 2.26 7.66
8-1442001-6 6.0 / 2.2 LD No 7.30 2.30 7.44
6-1442001-0 6.0 / 2.2 LD Yes 7.50 2.30 7.50
Dimensions for Cavity in Host (above)
(mm)
Diameter Max. Cavity Depth Mated Height
The Tyco Electronics line of Elastiboot connectors combines an elastomeric connector with an
acoustic grommet or “boot” for industry standard 4.0 and 6.0 mm diameter leadless microphones.
In a continued effort to lower the cost of hand-held electronic devices, high volume manufacturers
are looking for value added sub-assemblies from their component suppliers.
Elastiboot connectors from the Tyco Electronics Elastomeric Technologies product line fill this
need by providing ease of assembly in connecting small form-factor microphones to host PCBs.
Elastiboots combine the connector with the acoustic grommet (or “boot”) to create a one-piece,
orientation free subassembly.
Elastiboot connectors make assembly of microphones into portable electronic devices economical
and robust.
■Microphone is placed into
Elastiboot connector.
■Elastiboot/Microphone as-
sembly is placed in cavity in
front housing of mobile unit.
■Makes blind-mate connec-
tion to concentric-ring pads
on PC Board during final
assembly of unit.
■Concentric-ring pad layouts
allow for orientation-free
assembly.
■Elastiboot connector cap-
tures microphone while
providing electrical connec-
tion and acoustic sealing.
STAX™ Elastomeric Connectors for COG LCDs
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
52
STAX™ Elastomeric
Connectors for COG LCDs
Features
• Easily customized.
• Connects display glass or flex
circuit to PCB.
• Inhibits movement of the con-
tact interface during vibration.
• Stable electrical performance
over a wide working range of
deflection.
• Can accommodate glass-to-
board separations of as little as
0.25 mm.
• Applications engineering sup-
port from Tyco Electronics to
incorporate STAX elastomeric
connectors into your product.
Support includes board layout,
slot definition, alignment and
compression.
• In-molded sub assemblies can
be created to combine LCD
connector with backlighting
connection while providing
orientation features.
Physical Properties
Height:
0.5–12.7 mm (.020″–.500″)
Minimum Pad Pitch:
0.50 mm (.020″)
Conductor Width:
0.064 mm (.0025″)
Conductor Pitch:
0.127 mm (.005″)
Typical Electrical Properties
Contact Resistance: See chart
Dielectric Constant: 3.1
Insulation Resistance:
1012 Ωmin
Dielectric Withstanding Voltage1):
1000 V without breakdown or arcing
Current Carrying Capacity: 1 Amp
Environmental Parameters
Operating Temperature:
–40 ºC to +125 ºC
Moisture: 0 to 100% RH
Technical Documents
Engineering Test Report:
TR 341
Low resistance STAX elastomeric connectors are the best means of connecting to Chip-on-Glass
and other types of LCD modules. Gold STAX and STAX LD elastomeric connectors are easily
customized without the tooling charges and lead times typically found with stamped contacts
and molded insulators. They can be retained in a slot incorporated into the light guide that allows
for automatic placement of the light guide subassembly.
STAX connectors provide a gasket-like contact interface to the
ITO traces thereby sealing the interface from the environment.
At the same time, the compliant sealing properties of the silicone
elastomeric connector maintain intimate conformal contact to
the ITO surface.
STAX connectors have proven reliability in COG LCD displays for cell phone units – numbering in
the hundreds of millions.
STAX LD – Force vs Deflection vs Resistance Curve
Gold STAX – Force vs Deflection vs Resistance Curve
SMT-ETI-1 STAX™ Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 53
Tyco Electronics Elastomeric Technologies™ continues to demonstrate technology leader-ship
with the introduction of the INDUSTRY’S FIRST surface-mount elastomeric connector product.
The SMT-ETI-1 is a dedicated single position connector used in lieu of a spring-finger, pogo-pin,
or compliant materials in portable electronic and communication devices. The applications include
grounding, power connection, and shielding to eliminate EMI and RFI.
SMT-ETI-1
STAX™ Connector
Features
• Surface Mount / Pick-n-Place
• Tape & Reel or Bulk Packaging
• Low Resistance: 20 µOhm
• Deflection Range: 5–65%
• Long term reliability and
durability
• Economical
• Readily customized
(Hd: 1.0 to 2.25 mm )
• No tooling required
• One-piece connector
• Quick delivery custom proto-
type samples
Physical Properties
Deflected Height:
1.0–2.5 mm (.039″–.098″)
Minimum Pad Pitch:
3.0 mm (0.120″)
Elastomer Width:
1.00 ±0.10 mm
Elastomer Length:
1.95 ±0.15 mm
Conductor Pitch:
0.127 mm (.005″)
Pad Dimensions:
See below
Typical Electrical Properties
Contact Resistance1):
20 mΩ
Current Carrying Capacity1):
2 Amps
1) Test Boards: Gold plated contact pads
Environmental Parameters
Operating Temperature:
–40 ºC to +125 ºC
Moisture:
0 to 100% RH
Technical Documents
Qualification Test Report:
TR 371
The SMT-ETI-1 is an integration of Tyco Electronics’ ETI and
MID technologies:
■The surface mount holder is a gold plated plastic and
provides a low profile – small form factor “standard” base.
■A STAX™ HT (high temperature resistant) elastomer is
grafted into the SMT holder for a single-piece assembly.
A STAX™ elastomer has the widest range of deflection in low
profile connection (5 thru 65%) while maintaining consistent
performance and reliability. Combining the standard base with
the flexibility of the elastomeric manufacturing process allows
for an optimized connector for each application.
This minimizes the deflection forces while compensating for
z-axis tolerances. The silicone provides the normal force of the
connector, seals the contact interface, and even conforms to
irregular surfaces. Standard parts are available – modifications
can be easily created.
The electrical characteristics of the SMT-ETI-1 rival all competitive
technologies in resistance and current carrying capacity.
The SMT-ETI-1 STAX connector features silver particles
embedded within a low durometer silicone. Within each of the
conductive layers, the conductive particles create thousands
of conductive paths. Each conductive layer provides multiple
points of contact to the substrate interface.
The pitch of the conductive layers is only 0.127 mm (0.005″),
allowing multiple conductive layers to make contact to each
substrate pad.
Part No. 1-1442004-7
Bottom PCB Contact
Solder Pad Dimensions
Top PCB Contact Pad
(Flash-Gold) Dimensions
3.4
2.5
2.4
3.4
1.0
1.5
2.5
STAX™ Coax Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
54
Conductive elastomer outer conductor
Conductive elastomer inner conductor
Non-conductive elastomer
Center conductor
Dielectric material board
Outer conductor
Solder ring
Solder mask
Center conductor
Dielectric material board
Outer conductor
Solder ring
Solder mask
619238-2 SMT Mating Target Holder
619229-1 SMT STX Coaxial Connector Assembly
PCB Pattern for Mating Target
PCB Pattern
Tyco Electronics’ STAX coax connector is
the first surface mount RF coax connector
on the market that uses elastomeric con-
nector technology to provide an economi-
cal means to achieve low board separation
while maintaining excellent RF signal
integrity between PCBs.
The connector uses laminated sections of
conductive and non-conductive silicone that
are tuned to provide a 50 ohm impedance
line between mated substrates.
The single piece construction of the STAX coax connector eliminates some of the signal anomalies
normally associated with mated pairs of metal contact coax connectors. The dimensional rela-
tionship of the inner and outer conductor is consistently maintained throughout the connector.
With its metal holder, the STAX coax connector can be surface mount soldered to the PCB. An
additional metal SMT holder aligns the connector to the mating PCB. If adequate PCB alignment
is already maintained by other means, the coax connector may not need the additional mating
receptacle and can become a blind-mating connector. This has an additional advantage in space
constrained mobile applications where very fine-pitch board-to-board connectors are also used.
STAX™ Coax Connector
Features
• Low cost, low height and high
performance
• Low insertion loss 0–0.5 dB
from 0–6 GHz
• VSWR <1.07 from 0–6 GHz
• Wide working range of deflec-
tion
• Long term reliability and dura-
bility
• Surface mount / pick and place
• Low board separation < 2.5 mm
• Technology can support board
separations <1.5 mm
• Easily modified free height
• No tooling required for height
modifications
• Modified prototype samples
within 2 weeks
Physical Properties
Board Separation:
2.5 mm ±0.2 (Standard Part)
PCB Board Area:
4.0 mm diameter
Environmental Parameters
Operating Temperature:
–40 ºC to +125 ºC
Moisture:
0 to 100% RH
Electrical Properties
Contact Resistance:
<50 mΩ
Insulation Resistance:
1012 Ωmin
Dielectric Withstanding Voltage:
1000 Volt
Technical Documents
• Qualification Test Report – TR 368
• RF Performance Report – 00266
Part No. 619229-1 STAX SMT Coax Connector Assembly: Consists of STAX coax elastomer
in round SMT holder.
Part No. 619238-2 Mating SMT Target Holder: Controls alignment between PCBs
Part No. 1442004-1 STAX Coax Elastomer only: Used with customer furnished holder
Vibration Motor Connector
Products for Mobile Equipment
Connectors
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 55
Tyco Electronics’ vibration motor
elastomeric assembly is an innovative
option to standard motor attachment
methods using our proven STAX™
layered elastomeric connector
product line.
Hundreds of millions of our STAX
family of connectors have been used
to connect flex circuits, LCD’s, micro-
phones, and speakers within space-
constrained products such as mobile
phones, pagers, PDAs and disk
drives. This solution allows the com-
pression mate of a vibration motor to
almost any printed circuit board.
The STAX connector consist of
alternating layers of conductive and
non-conductive silicone.
These layers are typically 0.064mm thick on 0.127 mm centers and make redundant surface-to-
surface connection when deflected between the flat contact pads on the vibration motor to the
main PC Board. Vibration motor connectors provide a excellent combination of electrical perform-
ance, reliability, functionality and durability.
Vibration Motor Connector
Features
• Flexibility to modify the
standard product offering to
meet custom applications
• Eliminates obsolete inventory
due to changing application
requirements
• Minimize PCB space
• Eliminates fretting corrosion
issues
• Enables single piece assembly
• Eliminates troublesome solder-
ing of wires or use of male /
female connectors
• Eliminates the need and time
to tool many different spring
contacts
• Economical
• Long term reliability and
durability
• Custom prototype samples
within 2 weeks
Physical Properties
Application Deflected Height:
8.7 ±.02 mm (.342 ±0.008″)
Compression Force:
0.4 kg (nominal deflection)
Grommet Material:
Silicone Rubber
(55 Shore A durometer)
Typical Electrical Properties
Standard Voltage:
1.3 V DC
Rotating Direction:
Clockwise
Standard Load Rotation:
9000 ±2000
Standard Load Current:
105 mA
Starting Current:
130 mA max
Insulation Resistance:
1 Mega Ohm
Environmental Parameters
Operating Temperature:
–10 ºC to +60 ºC
Moisture:
0 to 100% RH
Part No. 6-1442002-7 Vibration Motor Connector Assembly
Part No. 7-1442002-3 Rubber Vibration Motor Boot
Part No. 7-1442002-2 Sanyo Motor # RS-2561
Part No. 7-1442002-1 Elastomeric Silver STAX™ Connector
Engineering Notes
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
56
Antenna Manufacturing Capabilities
Products for Mobile Equipment
Antenna Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 57
Tyco Electronics
Antenna Products
combines world class antenna
design competency with
unsurpassed integration and
optimization skills to provide
the best integrated solutions
for various applications.
Our global footprint and
wide variety of manufacturing
technologies allows our
customer s to be able to
choose from a large base of
manufacturing technologies
and factory locations.
Applications
Voice
Tyco Electronics Antenna Products provides handset OEM’s with the highest performing, lowest
cost embedded antenna solutions. With over 500 million Tyco Electronics cellular handset
antennas designed and manufactured to date, we offer the worldwide spectrum of frequencies
required to support cutting edge embedded antenna solutions. In addition to the handset
segments, the digital cordless telephone segment presents secondary voice capability for Tyco
Electronics. As this market continues its evolution into the 900 MHz and 2.4 GHz frequency
bands, Tyco Electronics Antenna Products is positioned to provide cutting-edge embedded
antenna solutions.
Data
Rapid growth in the wireless data market is creating unprecedented demand for embedded
antenna solutions. With the proper antenna, these devices can offer “any time” wireless access.
Data devices that utilize Tyco Electronics Antenna Product embedded antennas are PDAs,
laptops, access points, bar code scanners, compact flash cards, PC cards, printers, print
servers, cameras, etc. The Tyco Electronics Antenna Products Group has developed an entire
line of high performance, low cost embedded antennas for wireless data applications. Tyco
Electronics has a variety of cutting-edge " off the shelf” and customized embedded solutions
for virtually any wireless device. Covering 802.11a/b/g/n, WLAN, WWAN, WiBro, WiMAx, WiFi,
DVB and UWB applications.
Bluetooth
Bluetooth is revolutionizing the communication industry. It facilitates fast and secure trans-
missions of voice and data even when devices are not within line-of-sight. Devices include
mobile phones, computers, cameras, printers and virtually any device that has information to
communicate. The Tyco Electronics Antenna Products Group is at the forefront of Bluetooth
antenna development with a number of standard antenna products that are already being
utilized in the first generation Bluetooth devices on the market.
Antenna Manufacturing Capabilities
Products for Mobile Equipment
Antenna Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
58
MID Two Shot Antennas
■Design flexibility for 3D patterning
■Fewest manufacturing steps and processes
■Repeatability of manufacturing process
■Ability to integrate multiple functions
■Flexible manufacturing capacity
■Manageability of demand increases
■Simple low cost standardized interconnect utilized
■Best utilization of the 3D space that is available
■Tightest tolerances for pattern registration
Stamped Antennas
■Stamped and heatstaked
■Stamped and overmolded
■Pure stampings
■Typically the lowest cost antenna technology
when considering the interconnect cost as well
■Interconnect can be designed in (contacts)
■Production die is high volume capable
■Hand assembly stations can be added for volume
upswings
Three Key Technologies
MID (Molded Interconnect Device) Antennas
In 2000, Tyco Electronics acquired Molded Interconnect Device, LLC (MID). Now part of Tyco
Electronics Antenna Products, MID is headquartered in Rochester, NY and prides itself in being the
world’s leader in utilizing its technology to make everyday products better. With over 500 million
parts in service, our products are being utilized in applications ranging from joysticks to cell phones
as well as minivans to airplanes. In its most basic form, MID technology can be defined as any
product that results in selectively plated plastic parts. This technology results in outstanding repeat-
ability, which is ultimately suitable for the design and production of complex shaped antennas.
Stamped Metal and Overmolded
Tyco Electronics Antenna products has developed a line of low profile, high performance
Stamped Metal embedded antenna solutions for single-, dual-, tri-and quad-band applications.
Tyco Electronics Stamped Metal antennas offer OEMs, a low cost and highly repeatable manu-
facturing solution, in a number of standard “of the shelf” and customized antenna designs. Our
stamped embedded antennas address the needs of a variety of applications from 400 MHz to
5 GHz such as; mobile phones (AMPS, TDMA, CDMA, WCDMA, PCS, DCS and GSM), cordless
telephones, personal digital assistants (PDA), laptop computers, global positioning system (GPS)
devices and wireless networking (Bluetooth, 802.11 and ISM).
Antenna Manufacturing Capabilities
Products for Mobile Equipment
Antenna Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 59
FPC and PWB Antennas
■Pure FPC / PWB
■FPC on a carrier
■Best flexibility for pattern changes during production
■More ability to quickly tool to higher demand
during production
FPC and Printed Wiring Boards (PWB) Antennas
The Tyco Electronics Antenna Products Group has developed a line of low profile, high perform-
ance Print Wiring Board (PWB) antenna solutions for single-, dual-, tri-and quad-band applications.
Allowing virtually any wireless product to operate on different frequencies without multiple
antennas. Our FPC and PWB antenna solutions address the need of a variety of applications:
mobile phones (AMPS, TDMA, CDMA, WCDMA, PCS, DCS and GSM), cordless telephones,
personal digital assistants (PDA), laptop computers, global positioning system (GPS) devices and
wireless networking (Bluetooth, 802.11 and ISM).
RF Engineering Capabilities
Products for Mobile Equipment
Antenna Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
60
Antenna Design at Tyco Electronics
Tyco Electronics gets the optimal performance out of antennas by applying system-level integra-
tion and optimization design expertise to each wireless application. Our practical application and
simulation skills are second to none with global expertise in the U.S., Europe, and Asia.
Our global presence places antenna design experts next to the customer.
Modeling and Simulation
3D Part Design at Tyco Electronics
Six Step Integration Process
■Evaluation:
Is the customer’s expectation reasonable?
■Modeling:
Utilizing Ansoft HFSS
■Rapid Prototyping:
Are we making electrically working samples or just dummy
mechanical samples? Prototypes can be made in 1 week.
■Testing & Optimization:
Do we have the real device and is it the latest version?
■Production:
Pick the manufacturing technology after the design is
developed and fully understanding our customer’s goals
■Quality Assurance:
Our quality focus is inherent throughout the entire design
process and product life cycle.
Modeling and Simulation
Need info
■Pro Engineer Wildfire 2.0
CAD software
■Auto CAD 2005
■MPA Moldflow to predict moldings
behaviors
■Pro Mechanica stress and thermal
analysis software
Customer Support and Design Integration
Tyco Electronics provides world class antenna design integration and optimization to its cus-
tomers. Tyco Electronics prides itself in working with customers to optimize not only the antenna
performance but also the total system performance. The earlier that Tyco Electronics can be
involved in an integration project, the more opportunities there will be to deliver the most optimal
solution.
RF Engineering Capabilities
Products for Mobile Equipment
Antenna Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 61
Aptos, California
RF Engineering Capabilities
■Six Anechoic Chambers
■One Satimo Near Field Spherical Measurement Chamber
■Satimo Upgrade for mobile phone compliance testing
■Narda®SAR Measurement Equipment FEM
Electromagnetic Modeling (Ansoft HFSS)
■One CTIA compliant 3D test chamber
■Network analyzer to 20 GHz for Laptop programs
RF Engineering Locations:
■US
■China
■Japan
■Taiwan
■Korea
■Europe
Engineering Notes
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
62
MID
Products for Mobile Equipment
MID Technology
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 63
MID Technology
at Tyco Electronics
Tyco Electronics prides itself
in being the global leader in
providing Molded Interconnect
Technology (MID). In it’s most
basic form, MID technology
can be defined as any product
that results in selectively plated
plastic parts. This technology
can be used in three basic
ways, to solve 3-dimensional
electro-mechanical problems,
for shielding purposes, or to
develop antennas.
MID Technologies
Tyco Electronics can manu-
facture MID parts using three
manufacturing technologies,
Two Shot, Laser Imaging, and
Laser Direct Structuring.
Two Shot MID Technology
Two Shot
■Sequential injection molded substrate
■A plateable resin and a non-plateable resin
■Imaging in the molding process
■All electroless plating of catalyzed surfaces
Laser Imaging MID Technology
Laser Imaging today is typically only used for rapid prototyping
■Manufacturing using a circuit board production type process
■Machine or single shot mold in 3–10 days
■Laser image circuitry in 3–5 days
■Circuitry and plating are accurate to production processes
MID
Products for Mobile Equipment
MID Technology
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
64
Laser Direct Structuring Technology
Laser Direct Structuring (LDS) Technology
■Offers the ability to create parts with finer line width and spacing than conventional MID
processes will allow for.
■The structure is molded in a standard single shot mold using one of several proprietary plastics
available.
■Desired interconnect pattern is directly written on the resulting molded part and the conductive
paths are plated using industry standard methods.
■The plating adheres only where the plastic has been activated by the laser.
3D Part Design
Tyco Electronics provides its customers vast design expertise over a wide variety of manufac-
turing technologies. Our design engineers are experts in two shot design and product integration
for MID products. Optimal solutions are engineered with the appropriate MID technology to best
suit the application.
Modeling and Simulation
Tyco Electroniocs employs the most up
to date design tools available. We use
sophisticated 3D modeling and simulation
packages to accurately manufacture and
predict the end product.
■Pro Engineer Wildfire 2.0 CAD software
■Auto CAD 2005
■MPA Moldflow to predict molding
behaviors
■Pro Mechanica stress and thermal
analysis software
USB Data Cable Assembly
Products for Mobile Equipment
Cable Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 65
USB Data Cable Assembly
Features
■USB Data cable intend to
connect a mobile phone to
computer etc.
■Can be used as charger
■Connector and cable are
approved by USB Org.
■PU and PVC cable,
both types are available.
Connector
USB A Type
USB B Type
Mini USB A Type
Mini USB B Type
Can design the connector to
mate customer system
Cable
1P+2C+AL+D+B USB 2.0
28 AWG x 28 AWG
28 AWG x 26 AWG
28 AWG x 24 AWG
28 AWG x 22 AWG
28 AWG x 20 AWG
Overmolding
PVC
PVC Free/PU
USB Cable Assembly
Connectors
Music Cable Assembly
Products for Mobile Equipment
Cable Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
66
Music Cable Assembly
Features
■Audio cable intend to connect
a mobile phone to the line-in
on a stereo amplifier.
■PU and PVC cable,
both types are available.
Connector
RCA Plug
2.5 mm Audio Plug/Jack
3.5 mm Audio Plug/Jack
Adapter from Plug to Jack
Can design the connector to
mate customer system.
Cable
Twin Cable
Shielded Twisted Pair Cable
Overmolding
PVC
PVC Free/PU
Music Cable Assembly
Connectors
Charger Cable Assembly
Products for Mobile Equipment
Cable Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 67
Charger Cable Assembly
Features
■The semi-goods or finished
goods intend to be used for
the charger.
■PU and PVC cable,
both types are available.
Connector
USB Plug
2.0 mm DC Plug
3.5 mm DC Plug
Can design the connector to
mate customer system.
Cable
Can follow customer
specification.
Overmolding
PVC
PVC Free/PU
Charger Cable Assembly
Connectors
Mobile Phone Headset Solution
Products for Mobile Equipment
Cable Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
68
Mobile Phone
Headset Solution
Speaker
Diameter:
15 mm
Impedance:
16 Ω±15%
Frequency Range:
20 Hz up to 20 KHz
Sensitive:
108 ±4dB at 1 kHz
Nominal Power:
3 mW
Maximum Power:
5 mW
Connector
3 Pin, gold or nickel plating
Cable
Length:
400 ±15 mm
Pull Force:
30 N/min
Flexing Cycle:
3000 times/300 g
Non-Migration:
PS 60°, 500 g/72 H
Cover:
PVC
Color:
Grey/Silver
Bluetooth Hands-Free Solution
Products for Mobile Equipment
Cable Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 69
E11
Key Features
■Continuous Talk Time: 9 hours
■StandbyTime:
400 hours (16 days)
■Weight: 14 g
■Voice Dial
■Redial Last Number1
■Call Muting
■Multi Pairing2
■Fast Charge 2 hours
■Reversible hook with anti
allergic soft material for long
hold.
■Bluetooth v 1.2 headset and
hands-free profile compatible.
■For phones with hands-free
profile function.
■For headsets which are both
in the headset profile.
Bluetooth
Hands-Free Solution
Key Features
■Continuous Talk Time: 9 hours
■Standby Time:
400 hours (16 days)
■Weight: 12 g
■Voice Dial
■Redial Last Number1
■Call Muting
■Multi Pairing2
■Fast Charge 2 hours
■Reversible hook with anti
allergic soft material for long
hold.
■Bluetooth R v 1.2 Headset and
hands-free profile compatible.
■For phones with hands-free
profile function.
■For headsets which are both
in the headset profile.
■Color: Grey/Black
High-Speed Micro-Coax Cable Assembly (MCC)
Products for Mobile Equipment
Cable Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
70
High-Speed Micro-Coax
Cable Assembly (MCC)
Features
■Thin cable thickness and
fine pitch can save room for
application.
■Multi-position can transfer
5 to 25 pairs of signal.
■High soldering quality makes
high performance connect
between cable and contact.
Tyco Electronics has special
know-how for whole assembly
process.
■Tyco Electronics design the
connectors by herself.
Connector
No. of Positions:
10, 17, 20, 30, 40, 44, 50 pos.
are available to use.
Pitch:
0.4, 0.5, 0.6, 1.0 mm pitch are
available.
Direction:
Straight and 90 degree are
available.
Cable
Gage:
30, 32, 36, 40, 42 AWG cables
are available.
Pairs:
Single and Twin-Coax cables
are available.
Micro-Coax Cable Assembly
Connectors
Battery Systems
Products for Mobile Equipment
Batteries
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 71
Designing and Building Battery Systems for Technology
Tyco Electronics Battery Systems (TEBS) is a worldwide leader in the design and manufacture
of custom battery packs and systems for any portable electronic device or stationary back-up
power. A battery system is much more than a collection of cells. It is the source of the power
that enables your products to their fullest potential.
When you specify TEBS, you’re getting a dedicated team of innovative designers, trained to
devise the perfect solution within your power, space, weight and cost parameters.
From Concept Through Total Design
TEBS’ worldwide engineering design team incorporates electrical, mechanical and chemical
expertise to shorten the time required for design and development, ultimately reducing product
delivery times. Our cutting edge technology can increase functionality while reducing size, weight
and cost. TEBS has the ability to offer a turnkey design and manufacturing solution to match
the battery system to the specifications of your products.
Our unique program management system gives you a champion inside TEBS, charged with
supervising the design process from concept through finished product. When you specify TEBS,
you are buying the power to bring innovations to market, on time.
Design Innovation
With the goal of maximising compatibility with your product, our mechanical and electrical design
team will use creativity and technology to provide the optimum solution. Our engineering and
technical sales personnel are experienced in solving complex problems, validating the design
steps to ensure downstream performance, and developing quality designs that work. TEBS’
innovations deliver everything needed to get to market sooner, with an added competitive edge.
The Leading Edge
in Custom Power
Solutions
At TEBS, we provide powerful solutions for a wide range
of OEM applications, including:
●Cellular Telephones
●Laptop Computers & PDA’s
●Power Back-Up (i.e. Mass Data Storage Units)
●Digital Still & Video Cameras
●Two-Way Radios
●Data Acquisition
●Test Equipment
●Medical Applications
●Handheld P.O.S. & GPS
●Outdoor Telecom UPS
From Concept Through Total Design
Battery Systems
Products for Mobile Equipment
Batteries
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
72
Core Manufacturing Processes
Cost effective and flexible manufacturing methods are at the core of TEBS’ working methodology.
Incorporating advanced production techniques and the most reliable and efficient equipment
available in both manual and automated processes. TEBS’ production techniques ensure the
consistency and high performance of the finished product.
Flexible, future proof processes allow large volume manufacturing capacities and a higher degree
of repeatability in both quality and quantity of products. Integrating the best in both design and
assembly, TEBS gives you a world-class combination in both service and technology.
Testing and Qualification
With a fully integrated professional battery pack and cell testing facility in Shanghai, China,
TEBS provides complete in-house component and battery pack approval, typically covering cell,
PCB and full product assemblies. Testing includes pre-compliance and planned compliance
testing in safety, abuse, EMC, environmental reliability, performance and life testing through
internal, customer and regulatory specifications and standards.
In Shanghai, an array of environmental chambers, cell and pack cycling channels and other
specialized equipment is housed in over 6,000 square feet of dedicated testing space. These
unique independent testing capabilities offer our customers the ability to complete all of their
required specification and environmental testing under one roof and enables TEBS to offer the
complete turnkey power solution.
The lab is approved by UL to conduct UL1642 and UL2054 testing and issue certification to
both standards. TEBS also has senior level representation on the UL Standards Technical Panel
(UL1642 & UL2054) and IEEE-P1725 Work Group. TEBS has the additional capability to conduct
all UN/DoT testing in-house and provide the required certification documents.
Global Commitment
TEBS’ world-wide engineering design team
incorporates electrical, mechanical and chemical
expertise to shorten the time required for design
and development, ultimately reducing product
delivery times. Our cutting edge technology can
increase functionality while reducing size, weight
and cost.
TEBS has the ability to offer a turnkey design
and manufacturing solution to match the battery
system to the specifications of your products.
Our unique program management system gives
you a champion inside TEBS, charged with
supervising the design process from concept
through finished product.
When you specify TEBS, you are buying the
power to bring innovations to market, on time.
Technology Portfolio
Products for Mobile Equipment
Mechatronic Center Niefern
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 73
Bonding Capability Guaranty
Reel-to-Reel Stamping
■High-speed stamping
■4 fold stamping tool,
70 mm width
■Material: Copper alloy
Mechatronic Center
Niefern
Advanced Tyco Electronics
technologies allow us to
produce highly competitive
semi-finished products for
card manufacturers of the
1st, 2nd and 3rd generation.
■High-Speed Stamping
■Selective Plating
■Laminating
■Reel-to-Reel Over-Molding
The products are delivered
on a reel and can be used
for chip mounting by our
customers.
Reel-to-Reel Plating
■Plating in 70 mm width
■Selective Metalization:
●Overall Ni
●Contacts Side:
– Spots on contact area
– Gold flash
●Bonding Side:
– Strips or Spots
■Slitting in 35 mm
Reel-to-Reel Lamination
■Clean room class 100,000
■High accuracy dielectric
stamping
■Mechanical alignment and
prefixing of dielectric
■Leadframe roll lamination
■100 % video control
Reel-to-Reel
Over-Molding
■Free cutting in line
■Multiple cavities
mold
LAMFRAME
Products for Mobile Equipment
Mechatronic Center Niefern
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
74
LAMFRAME
Key Features
■Low cost tape for memory
and microprocessor
applications
■Compatible with industry
standard processes
■Allow wide range of dielectric
(type and thickness)
■Optimisation of dielectric
area for cost reduction
■Minimum Slit Size:
0.15 mm
This technology allows Tyco Electronics to
offer a wide range of products for memory
and microprocessor smart cards with:
■Plating Finishes
●Gold
●“Grey like” plating
■Dielectric
●Polyimide
●Glass epoxy
●Polyester
●…
■Customized thickness
■Disconnection option
Lamination process is carried out in a clean room to avoid any outside contamination.
Tyco Electronics is able to perform bonding tests with gold or aluminium wires during design phase
but also to ensure the quality during all the life time of the products.
Products are today customer specific, Tyco Electronics Open Design available.
Mini SIM Card Packaging
Products for Mobile Equipment
Mechatronic Center Niefern
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 75
Key Features
■Microelectronic can be made on semi final packaging, no module out cutting and embedding
operation.
■Lower risk and process time improvement.
■Personalisation can be realized separately on tapes, and bring together by a final operation.
■No additional card body is needed, but also possibility to plug in 1st or 2nd card body generation.
Mini SIM
Card Packaging
Tyco Electronics propose
a new Packaging for the
3rd Generation of SIM Cards
The leadframe is over moulded
with a plastic package at
dimension close to the final
Mini SIM card body.
This technology allows our
customers to work directly
on advanced product and
use their standard available
reel-to-reel equipments.
Produced with the Standard
Tyco Electronics Technologies
■High-speed stamping
■Selective plating
■Laminating
■Reel-to-reel over moulding
GaAs SP6T 2.5 V Power Switch
Products for Mobile Equipment
M/A-COM Antenna Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
76
GaAs SP6T 2.5 V
Power Switch
Features
M/A-COM’s MASWSS0091 is a
GaAs PHEMT MMIC single pole
six throw (SP6T) high power
switch die. This switch is ideally
suited for applications where
high power, low control voltage,
low insertion loss, high isolation,
small size and low cost are
required.
The MASWSS0091 is designed
for dual-, tri-, and quad-band
GSM and DCS/PCS handset
systems that connect separate
transmit and receive functions to
a common antenna, and can be
used in all systems operating up
to 2.5 GHz requiring high power
at low control voltage.
GaAs SP3T 2.6 V
CDMA/GPS Switch
Features
M/A-COM’s MASWSS0191 is an
industry leading GaAs PHEMT
MMIC single pole three throw
(SP3T) CDMA-GPS switch in a
2 mm 8-lead STDFN package.
The MASWSS0191 is uniquely
configured to enable switching
from a common antenna port to
CDMA cellular, CDMA PCS, or
GPS ports. The design is asym-
metric and has been fully
optimized for excellent cross
modulation performance in CELL
and PCS paths while still main-
taining excellent insertion loss
and isolation. The MASWSS0191
is fabricated using a 0.5 micron
gate length GaAs PHEMT pro-
cess. The process features full
passivation for performance and
reliability.
Functional Schematic
Functional Schematic
Die Layout
0.82
2.0
1.01
2.0
GaAs SP3T 2.6 V CDMA/GPS Switch
Lithium Cells and Battery Packs
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 77
Lithium Cells and
Battery Packs
External shorts, runaway
charging conditions, or
abusive charging can cause
considerable damage to
primary and secondary lithium
cells. Rechargeable lithium
batteries are used in notebook
computers and cellular phones
as well as other portable
electronic applications.
Product Series:
LR4, LTP, SRP, VLR, VTP
Rechargeable Battery Pack Protection
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
78
Rechargeable
Battery Pack Protection
Due to external shorts, run-
away charging conditions, or
abusive charging, considerable
damage can be sustained in
both battery cells and pack
surroundings. The most
common applications are
nickel-cadmium (NiCd), nickel-
metal-hydride (NiMH), and
lithium-ion (Li-ion) battery
packs for cellular phones,
laptop/notebook computers,
and other portable electronic
applications.
Product Series:
LR4, LTP, SRP, VLR, VLP, VTP
Portable Electronics Input Port Protection
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 79
Portable Electronics Input
Port Protection
The use of an incorrect or
faulty adapter/charger can irre-
parably damage unprotected
portable electronics equip-
ment. Typical applications
include cellular phones,
PDAs, and digital cameras.
Product Series:
nanoSMD, microSMD, miniSMD
IC
OV
OC1 OC2
PWM Ident
PolySwitch
Strap device
alternative position
FET or BJT
PolySwitch device
From
AC
3x NiMH
Battery Pack
Phone supply
Adapter
Charge
Control
HDMI: LCD, Plasma, HDTV, Set-Top Box, DVD Player
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
80
HDMI: LCD, Plasma, HDTV,
Set-Top Box, DVD Player
HDMI (High Definition Multi-
media Interface) applications
such as LCD displays, Plasma
displays, High Definition Tele-
vision set-top boxes, and
DVD players are susceptible
to electrostatic discharge.
To help protect the high speed
TNDS lines against ESD hits
PESD devices are used, two
per line.
Product Series:
PESD
Strap Battery Devices – VLR Series
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 81
Strap Battery Devices –
VLR Series
Features
■Current ratings from
1.7 A to 2.3 A
■Voltage: 12 V
■Agency Recognition:
UL, CSA, TÜV
■Fast time-to-trip
■Low resistance
Lead Material:
0.125 mm nominal thickness,
quarter-hard nickel
Tape Material:
Polyester Figure B1 Figure B2
Figure B3
Part Number Figure
85 °C Typical Activation
VLR
VLR170F 20.8 23.2 – 0.8 3.5 3.9 4.5 6.5 4.5 06.5 2.4 2.6 B1
VLR170LF 38.8 41.2 – 0.8 3.5 3.9 8.7 10.3018.7020.3 2.4 2.6 B1
VLR170UF 20.8 23.2 – 0.7 3.5 3.7 5.3 6.7 5.3 06.7 2.4 2.6 B2
VLR175F 23.0 24.5 – 0.8 2.9 3.3 4.7 7.2 3.8 05.4 2.4 2.6 B1
VLR175LF 29.3 31.7 – 0.8 2.9 3.3 5.2 6.8 10.0012.5 2.4 2.6 B1
VLR175UF 23.0 24.5 – 0.7 2.9 3.1 5.2 7.5 4.3 05.7 2.4 2.6 B2
VLR230F 20.9 23.1 – 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B1
VLR230F-C36 25.3 27.7 – 0.8 3.5 3.9 3.5 5.7 3.5 05.7 2.9 3.1 B3
VLR230SUF 20.9 23.1 – 0.7 4.9 5.1 4.1 6.0 4.1 06.0 3.9 4.1 B2
Dimensions (mm)
F
Min. Max.
E
Min. Max.
D
Min. Max.
C
Min. Max.
B
Min. Max.
A
Min. Max.
Strap Battery Devices – VLP Series
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
82
Strap Battery Devices –
VLP Series
Features
■Current ratings from
2.1 A to 2.7 A
■Voltage: 16 V
■Agency Recognition:
UL, CSA, TÜV
■Fast time-to-trip
■Low resistance
Lead Material:
0.125 mm nominal thickness,
quarter-hard nickel
Tape Material:
Polyester
Figure B4
Part Number Figure
90 °C Typical Activation
VLP
VLP220F 21.1 23.3 0.6 0.8 3.5 3.9 5.1 6.8 5.1 6.8 2.9 3.1 B4
VLP270F 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 5.8 3.9 4.1 B4
Dimensions (mm)
F
Min. Max.
E
Min. Max.
D
Min. Max.
C
Min. Max.
B
Min. Max.
A
Min. Max.
Strap Battery Devices – VTP Series
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 83
Strap Battery Devices –
VTP Series
Features
■Current ratings from
1.1 A to 2.4 A
■Voltage: 16 V
■Agency Recognition:
UL, CSA, TÜV
■Fast time-to-trip
■Low resistance
Lead Material:
0.125 mm nominal thickness,
quarter-hard nickel
Tape Material:
Polyester Figure B5 Figure B7Figure B6
Figure B8 Figure B9
Part Number Figure
90 °C Typical Activation
VTP
VTP110F 23.6 25.6 – 0.7 2.7 2.9 7.0 8.0 7.0 08.0 2.3 2.5 B9
VTP170F 15.4 17.5 0.5 0.8 7.0 7.4 4.0 6.2 4.0 06.2 3.9 4.1 B5
VTP170XF 20.9 22.9 0.5 0.8 4.9 5.3 6.0 8.6 6.0 08.6 3.9 4.1 B6
VTP170XSF 20.9 22.9 0.5 0.8 4.9 5.3 6.0 8.6 6.0 08.6 3.9 4.1 B7
VTP175F 21.2 23.2 – 0.8 3.5 3.9 4.6 6.6 4.6 06.6 2.9 3.1 B6
VTP175LF 25.8 28.2 – 0.8 3.5 3.9 5.7 7.3 8.7 10.3 2.4 2.6 B6
VTP175UF 21.2 23.2 – 0.7 3.5 3.7 5.6 6.8 5.6 06.8 2.9 3.1 B9
VTP200GF 20.9 23.1 – 0.8 4.1 4.5 3.0 4.8 3.0 04.8 2.9 3.1 B6
VTP200UF 20.9 23.1 – 0.7 4.1 4.3 4.0 5.4 4.0 05.4 2.9 3.1 B9
VTP210GF 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B6
VTP210SF 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B7
VTP210SLF 29.0 32.0 0.6 0.8 4.9 5.3 3.5 5.8 12.5014.5 3.9 4.1 B7
VTP210SSF 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B8
VTP240F 23.8 26.2 – 0.8 4.9 5.3 3.5 5.7 3.5 05.7 3.9 4.1 B6
Dimensions (mm)
F
Min. Max.
E
Min. Max.
D
Min. Max.
C
Min. Max.
B
Min. Max.
A
Min. Max.
Strap Battery Devices – LTP Series
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
84
110 °C Typical Activation
LTP
LTP070F 19.9 22.1 0.7 1.2 4.9 5.2 5.5 7.5 5.5 7.5 3.9 4.1 B10
LTP070SF 19.9 22.1 0.7 1.2 4.9 5.2 5.5 7.5 5.5 7.5 3.9 4.1 B11
LTP100F 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B10
LTP100SF 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B11
LTP100SLF 29.0 32.0 0.6 1.0 4.9 5.2 3.5 5.5 12.5014.503.9 4.1 B11
LTP100SSF 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B12
LTP180F 24.0 26.0 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B10
LTP180LF 35.5 37.5 0.6 1.0 4.9 5.2 9.7 11.009.7 11.003.9 4.1 B10
LTP180SF 24.0 26.0 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B11
LTP190F 21.3 23.4 0.5 1.1 10.2011.005.0 7.6 5.0 7.6 4.8 5.4 B10
LTP260F 24.0 26.0 0.6 1.0 10.8011.905.0 7.0 5.0 7.0 5.9 6.1 B10
LTP300F 28.4 31.8 0.5 1.1 13.0013.506.3 8.9 6.3 8.9 6.0 6.6 B10
LTP340F 24.0 26.0 0.6 1.0 14.8015.904.0 5.0 4.0 5.0 5.9 6.1 B10
Strap Battery Devices –
LTP Series
Features
■Current ratings from
0.7 A to 3.4 A
■Voltage: 15 V to 25 V
■Agency Recognition:
UL, CSA, TÜV
■Fast time-to-trip
■Low resistance
Lead Material:
0.125 mm nominal thickness,
quarter-hard nickel
Tape Material:
Polyester
Figure B10 Figure B11
Figure B12
Part Number Figure
Dimensions (mm)
F
Min. Max.
E
Min. Max.
D
Min. Max.
C
Min. Max.
B
Min. Max.
A
Min. Max.
Strap Battery Devices – LR4 Series
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 85
125 °C Typical Activation
LR4
LR4-170UF 19.0 21.0 0.5 0.7 3.8 4.0 5.3 6.5 5.3 6.5 2.9 3.1 B15
LR4-190F 19.9 22.1 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B13
LR4-190SF 19.9 22.1 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B14
LR4-260F 20.9 23.1 0.6 1.0 4.9 5.5 4.1 5.5 4.1 5.5 3.9 4.1 B13
LR4-260SF 20.9 23.1 0.6 1.0 4.9 5.5 4.1 5.5 4.1 5.5 3.9 4.1 B14
LR4-380F 24.0 26.0 0.6 1.0 6.9 7.5 4.1 5.5 4.1 5.5 4.9 5.1 B13
LR4-380XF 32.2 35.8 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B13
LR4-450F 24.0 26.0 0.6 1.0 9.9 10.505.3 6.7 5.3 6.7 5.9 6.1 B13
LR4-550F 35.0 37.0 0.6 1.0 6.9 7.5 5.3 6.7 5.3 6.7 4.9 5.1 B13
LR4-600F 24.0 26.0 0.6 1.0 13.9014.504.1 5.5 4.1 5.5 5.9 6.1 B13
LR4-600XF 40.5 42.7 0.6 1.0 6.9 7.5 5.2 6.8 5.2 6.8 4.9 5.1 B13
LR4-730F 27.1 29.1 0.6 1.0 13.9014.504.1 5.5 4.1 5.5 5.9 6.1 B13
LR4-880SSF 62.8 65.2 0.6 1.0 7.9 8.5 10.0012.0010.0012.005.9 6.1 B16
LR4-900F 45.4 47.6 0.9 1.3 7.9 8.5 4.6 6.2 4.6 6.2 5.9 6.1 B13
LR4-1300SSF 61.5 66.5 0.9 1.3 9.4 10.005.0 7.5 5.0 7.5 5.9 6.1 B16
Strap Battery Devices –
LR4 Series
Features
■Current ratings from
1.7 A to 14.1 A
■Voltage: 15 V to 20 V
■Agency Recognition:
UL, CSA, TÜV
■Fast time-to-trip
■Low resistance
Lead Material:
0.125 mm nominal thickness,
quarter-hard nickel
Tape Material:
Polyester Figure B13 Figure B14
Figure B15 Figure B16
Part Number Figure
Dimensions (mm)
F
Min. Max.
E
Min. Max.
D
Min. Max.
C
Min. Max.
B
Min. Max.
A
Min. Max.
Strap Battery Devices – SRP Series
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
86
SRP
SRP120F 19.9 22.1 0.6 1.0 04.9 05.2 5.5 7.5 5.5 7.5 3.9 4.1 B17
SRP120LF 24.9 27.1 0.6 1.0 04.9 05.2 5.5 7.5 10.5 12.5 3.9 4.1 B17
SRP120SF 19.9 22.1 0.6 1.0 04.9 05.2 5.5 7.5 5.5 7.5 3.9 4.1 B18
SRP175F 20.9 23.1 0.6 1.0 04.9 05.2 4.1 5.5 4.1 5.5 3.9 4.1 B17
SRP175LF 29.9 32.1 0.6 1.0 04.9 05.2 5.5 7.5 10.5012.503.9 4.1 B17
SRP175SF 20.9 23.1 0.6 1.0 04.9 05.2 4.1 5.5 4.1 5.5 3.9 4.1 B18
SRP175SSF 20.9 23.1 0.6 1.0 04.9 05.2 4.1 5.5 4.1 5.5 3.9 4.1 B19
SRP200F 21.3 23.4 0.5 1.1 10.2 11.0 5.0 7.6 5.0 7.6 4.8 5.4 B17
SRP350F 28.4 31.8 0.5 1.1 13.0 13.5 6.3 8.9 6.3 8.9 6.0 6.6 B17
SRP420F 30.6 32.4 0.5 1.1 12.9 13.6 5.0 7.5 5.0 7.5 6.0 6.7 B17
Strap Battery Devices –
SRP Series
Features
■Current ratings from
1.2 A to 4.2 A
■Voltage: 15 V to 30 V
■Agency Recognition:
UL, CSA, TÜV
■Fast time-to-trip
■Low resistance
Lead Material:
0.125 mm nominal thickness,
quarter-hard nickel
Tape Material:
Polyester
Figure B17 Figure B18
Figure B19
Part Number Figure
Dimensions (mm)
F
Min. Max.
E
Min. Max.
D
Min. Max.
C
Min. Max.
B
Min. Max.
A
Min. Max.
Surface-Mount Devices – nanoSMDC
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 87
nanoSMP Series
Size 3216 mm/1206 mils
nanoSMDC012F 3.00 3.40 0.62 1.00 1.37 1.80 0.25 0.75 0.08 – – – S1
nanoSMDC016F 3.00 3.40 0.62 1.00 1.37 1.80 0.25 0.75 0.08 – – – S1
nanoSMDC020F 3.00 3.40 0.38 0.64 1.37 1.80 0.25 0.75 0.08 – – – S1
nanoSMDC035F 3.00 3.40 0.38 0.64 1.37 1.80 0.25 0.75 0.08 – – – S1
nanoSMDC050F/13.2 3.00 3.40 0.38 0.64 1.37 1.80 0.25 0.75 0.08 – – – S1
nanoSMDC075F 3.00 3.40 0.28 0.48 1.37 1.80 0.25 0.75 0.08 – – – S1
nanoSMDC110F 3.00 3.40 0.67 1.00 1.37 1.80 0.25 0.75 0.08 – – – S1
nanoSMDC150F 3.00 3.40 0.55 0.89 1.37 1.80 0.25 0.75 0.08 – – – S1
nanoSMDC200F 3.00 3.40 0.68 1.25 1.37 1.80 0.25 0.75 0.08 – – – S1
Surface-Mount Devices –
nanoSMDC
Features
■Broadest range of resett-
able devices available in the
industry
■Current ratings from
0.12 A to 2 A
■Voltage ratings from
6 V to 48 V
■Agency Recognition:
UL, CSA, TÜV
■Fast time-to-trip
■Low resistance
Terminal Pad Material:
100 % matte tin with nickel
underplate
Figure S1
Part Number Figure
Dimensions (mm)
F
Min. Max.
E
Min. Max.
D
Min. Max.
C
Min. Max.
B
Min. Max.
A
Min. Max.
Surface-Mount Devices – microSMD
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
88
microSMD Series
Size 3225 mm/1210 mils
microSMD005F 3.00 3.43 0.50 0.85 2.35 2.80 0.25 0.75 0.20 – – – S3
microSMD010F 3.00 3.43 0.50 0.85 2.35 2.80 0.25 0.75 0.20 – – – S2
microSMD035F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.20 – – – S2
microSMD050F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.20 – – – S2
microSMD075F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.20 – – – S2
microSMD110F 3.00 3.43 0.28 0.48 2.35 2.80 0.25 0.75 0.20 – – – S2
microSMD150F 3.00 3.43 0.51 1.22 2.35 2.80 0.25 0.75 0.20 – – – S2
microSMD175F 3.00 3.43 0.40 0.76 2.35 2.80 0.25 0.75 0.20 – – – S2
Surface-Mount Devices –
microSMD
Features
■Broadest range of resett-
able devices available in the
industry
■Current ratings from
0.05 A to 1.75 A
■Voltage ratings from
6 V to 30 V
■Agency Recognition:
UL, CSA, TÜV
■Small footprint
■Fast time-to-trip
■Low resistance
Terminal Pad Material:
100 % matte tin with nickel
underplate
Figure S2 Figure S3
Part Number Figure
Dimensions (mm)
F
Min. Max.
E
Min. Max.
D
Min. Max.
C
Min. Max.
B
Min. Max.
A
Min. Max.
Surface-Mount Devices – miniSMDC
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 89
miniSMDC Series
Size 4532 mm/1812 mils
miniSMDC014F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC020F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC050F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC075F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC075F/24 4.37 4.83 0.81 1.30 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC110F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC110F/16 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC110F/24 4.37 4.83 0.81 1.30 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC125F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC125F/16 4.37 4.83 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC150F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC150F/12 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC150F/24 4.37 4.83 1.00 1.68 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC160F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC200F 4.37 4.73 0.51 1.22 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC260F 4.37 4.73 0.48 0.74 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC260F/12 4.37 4.73 0.76 1.25 3.07 3.41 0.25 0.95 0.20 – – – S4
miniSMDC260F/16 4.37 4.73 0.76 1.25 3.07 3.41 0.25 0.95 0.20 – – – S4
Surface-Mount Devices –
miniSMDC
Features
■Broadest range of resett-
able devices available in the
industry
■Current ratings from
0.14 A to 2.6 A
■Voltage ratings from
6 V to 60 V
■Agency Recognition:
UL, CSA, TÜV
■Small footprint
■Fast time-to-trip
■Low resistance
Terminal Pad Material:
100 % matte tin with nickel
underplate
Figure S4
Part Number Figure
Dimensions (mm)
F
Min. Max.
E
Min. Max.
D
Min. Max.
C
Min. Max.
B
Min. Max.
A
Min. Max.
Surface-Mount Devices – miniSMDE
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
90
miniSMDE Series
Size 11550 mm/4420 mils
miniSMDE190F 11.15 11.51 0.33 0.53 4.83 5.33 0.51 1.02 0.38 – – – S5
Surface-Mount Devices –
miniSMDE
Features
■Broadest range of resett-
able devices available in the
industry
■Current Rating: 1.9 A
■Voltage Rating: 16 V
■Agency Recognition:
UL, CSA, TÜV
■Small footprint
■Fast time-to-trip
■Low resistance
Terminal Pad Material:
100 % matte tin with nickel
underplate
Figure S5
Part Number Figure
Dimensions (mm)
F
Min. Max.
E
Min. Max.
D
Min. Max.
C
Min. Max.
B
Min. Max.
A
Min. Max.
Fast Acting Fuses
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 91
0402SFF050F/24 0.50 0.380
0402SFF075F/24 0.75 0.210
0402SFF100F/24 1.00 0.120
0402SFF150F/24 1.50 0.056 24 35
0402SFF200F/24 2.00 0.035
0402SFF300F/24 3.00 0.021
0402SFF400F/24 4.00 0.014
0603SFF050F/32 0.50 0.485
0603SFF075F/32 0.75 0.254 50
0603SFF100F/32 1.00 0.131
0603SFF150F/32 1.50 0.059
0603SFF200F/32 2.00 0.044 32
0603SFF250F/32 2.50 0.032
0603SFF300F/32 3.00 0.025 35
0603SFF350F/32 3.50 0.024
0603SFF400F/32 4.00 0.018
0603SFF500F/32 5.00 0.013
0603SFF600F/24 6.00 0.010 24
1206SFF050F/63 0.50 0.500
1206SFF075F/63 0.75 0.330
1206SFF100F/63 1.00 0.220 63
1206SFF150F/63 1.50 0.120 50
1206SFF175F/63 1.75 0.100
1206SFF200F/63 2.00 0.050
1206SFF250F/32 2.50 0.035
1206SFF300F/32 3.00 0.031 32
1206SFF400F/32 4.00 0.022
1206SFF500F/32 5.00 0.015
1206SFF600F/24 6.00 0.013 45
1206SFF700F/24 7.00 0.011 24
1206SFF800F/24 8.00 0.008
Fast Acting Fuses
Features
Fast-acting fuses help provide overcurrent protection on systems
using DC power sources up to 63 V DC. The fuse’s monolithic,
multilayer design provides the highest hold current in the smallest
footprint, reduces diffusion-related aging, improves product relia-
bility and resilience, and enhances high temperature performance
in a wide range of circuit protection designs. This helps facilitate
the development of more reliable, high-performance consumer
electronics such as laptops, multimedia devices, cell phones, and
other portable electronics.
Material Specifications
Construction Body Material: Ceramic
Termination Material: Silver, Nickel, Tin
Fuse Element: Silver
Terminal Strength: Hanging Test
0603: 0.5 kg, 30 seconds;
1206: 1.5 kg, 30 seconds;
0402: Part types meet 2-pound push test
Part
Number
Typical Electrical
✱Characteristics ✱
Rated Nominal
Current †Cold DCR †
(A) (Ω)
Maximum
✱Interrupt Ratings ✱
Voltage Current
(VDC) (A)
✱) Measured at 25 °C
†) Measured at 10% of rated current
1206 (3216 mm) Fast Acting Surface-Mount Chip Fuses
Shape and Dimensions Recommended Pad Layout
Inch (mm) Inch (mm)
Dimensions and Pad Layout
0402 (1005 mm) Fast Acting Surface-Mount Chip Fuses
Shape and Dimensions Recommended Pad Layout
Inch (mm) Inch (mm)
0603 (1608 mm) Fast Acting Surface-Mount Chip Fuses
Shape and Dimensions Recommended Pad Layout
Inch (mm) Inch (mm)
Slow Blow Fuses
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
92
Recommended
Pad Layout
Inch (mm)
1206SFS100F/63 1.0 0.260 0.11
1206SFS125F/63 01.25 0.150 0.22 63
1206SFS150F/63 1.5 0.130 0.23
1206SFS200F/63 2.0 0.090 0.63
1206SFS250F/32 2.5 0.050 0.90
1206SFS300F/32 3.0 0.032 1.20
1206SFS350F/32 3.5 0.028 1.60 32
1206SFS400F/32 4.0 0.022 2.20
1206SFS450F/32 4.5 0.019 3.60
1206SFS500F/32 5.0 0.018 5.30
1206SFS550F/24 5.5 0.014 6.40
1206SFS600F/24 6.0 0.012 8.50 24
1206SFS700F/24 7.0 0.009 10.000
1206SFS800F/24 8.0 0.008 16.900
Slow Blow Fuses
Features
Industry standard 1206 chip
sizes, high reliability and strong
arc suppression characteristics.
The fuse’s monolithic, multi-
layer design helps provide
some of the highest current
ratings available in the 1206
footprint and enhances high
temperature performance in a
wide range of circuit protection
designs. Designed for DC
power applications of up to
63 V DC such as protection of
power supplies, capacitor filter
banks, LCD backlight inverters,
electric motors and portable
electronics.
Material Specifications
Construction Body Material:
Ceramic
Termination Material:
Silver, Nickel, Tin
Fuse Element: Silver
Terminal Strength:
Hanging Test: 1.5 kg, 30 seconds
Part
Number
Typical Electrical
✱Characteristics ✱
Rated Nominal
Current †Cold DCR †
(A) (Ω)
Nominal Voltage
l2t
(A2sec)2(VDC)
✱) Measured at 10 % of rated current and 25 °C
†) Melting l2t at 0.001 sec clear time
Dimensions and Pad Layout
1206 (3216mm) Slow Blow Surface-Mount Chip Fuses
Shape and
Dimensions
Inch (mm)
ESD Protection Devices
Products for Mobile Equipment
Raychem Circuit Protection Products
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 93
ESD Protection Devices
Features
Designed for I/O port protection in high-speed data transmission
applications, PESD protection devices shunt ESD away from
sensitive circuitry in electronic devices.
The Raychem PESD protection devices provide exceptionally
low capacitance, and they perform better than other comparable
components in transmission line pulse (TLP) testing, as well as
IEC61000-4-2 testing, especially after multiple hits (up to 1000).
The devices offer a lower trigger voltage and a lower clamping
voltage than typical polymer ESD devices, resulting in improved
protection of sensitive electronic components.
Dimensions
Pad Layout
Part
Number
Dimensions (mm) ✱
Length A
Min. Max.
Height B
Min. Max.
Terminal Width C
Min. Max.
Width D
Min. Max.
0402 0.95 1.05 0.33 0.43 0.10 0.30 0.45 0.55
0603 1.40 1.80 0.38 0.58 0.10 0.50 0.60 1.00
✱) Rounded off approximation
Part
Number
Dimensions (mm) ✱
Height B
Min. Max.
Length A
Min. Max.
Terminal Width C
Min. Max.
Width F
Min. Max.
Width E
Min. Max.
Width D
Min. Max.
1206Q 3.0 3.4 0.4 0.6 0.1 0.3 1.4 1.8 0.2 0.6 0.2 0.6
✱) Rounded off approximation
Part
Number
Dimensions (mm) ✱
V Ref. W Ref. X Ref. Y Ref. Figure
PESD0402Q– 0.65 ±0.05 0.35 ±0.05 0.85 ±0.05 – E3
PESD0603Q– 0.95 ±0.05 0.55 ±0.05 1.05 ±0.05 – E3
PESD1206Q 3.2 ±0.2 22.0 ±0.200.50 ±0.10 0.80 ±0.20 1.0 ±0.1 E4
Note: Solder Thickness 0.15 to 0.20 mm
✱) Rounded off approximation
Figure E4Figure E3
Engineering Notes
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
94
FSM 6 x 6 Series
Products for Mobile Equipment
Switches
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 95
FSM 6 x 6 Series
■Different Actuator and
Mounting Versions
Technical Features
Style:
6 x 6 mm
Mounting Style:
THT, SMT
Right-Angle Versions:
Available
Low Profile Versions:
Available
Flush Actuator Version:
Available
Different Actuator Styles:
Available
ESD Ground Terminal/
Locating Post:
Optional/No
Sealed Versions:
Available
Standard Actuation Force:
1.6 and 2.6 N
Electrical Endurance:
up to 2,000,000 cycles
Operating Temperature Range:
–20 °C up to +85 °C
Dimensions (L x W x H)
Horizontal Version:
6.0 x 6.0 x 4.3 … 17.0 mm
Sealed Version:
7.6 x 7.6 x 3.3 … 5.0 mm
Packaging:
Tape and Reel, Bulk
FSM2JSMATR 1.6 4.3 3-1437565-0
FSM4JSMATR 1.6 5.0 4-1437565-2
FSM6JSMATR 1.6 7.0 5-1437565-0
FSM2JSMAATR 2.6 4.3 2-1437565-9
FSM4JSMXLTR 0.7 5.0 0-1571563-2
FSM4JSMAATR 2.6 5.0 0-1571563-4
FSM6JSMAATR 2.6 7.0 1-1571563-2
FSM2JSMLTR 1.0 4.3 0-1571527-2
FSM2JSMA 1.6 4.3 2-1437565-7
FSM4JSMA 1.6 5.0 4-1437565-1
FSM6JSMA 1.6 7.0 4-1437565-9
FSM2JSMAA 2.6 4.3 2-1437565-8
FSM4JSMXL 0.7 5.0 0-1571563-1
FSM4JSMAA 2.6 5.0 0-1571563-3
FSM6JSMAA 2.6 7.0 1-1571563-1
FSM2JSML 1.0 4.3 0-1571527-1
FSM, Extended Life, J-Lead
FSM, J 1.6 2.5 SMT/J Bulk 0-1571625-5
Tape and Reel 0-1571625-6
FSM, Extended Life, Gull Wing
FSM, G 1.6 2.5 SMT/G Bulk 0-1571626-5
Tape and Reel 0-1571626-6
FSM, Extended Life, Gull Wing, Ground Terminal
FSM, G, Grd.T. 1.6 2.5 SMT/G Bulk 0-1571636-5
Tape and Reel 0-1571636-6
FSM1LP, Low Profile
FSM1LP 1.6 3.1 SMT Bulk 1-1437565-6
FSM1LPA 2.6 1-1437565-7
FSM1LPTR 1.6 3.1 SMT Tape and Reel 1-1437565-9
FSM1LPATR 2.6 1-1437565-8
FSM Sealed Extended Actuator
4.3 SMT Bulk 0-1571294-1
FSM Sealed 1.6 Tape and Reel 0-1571294-2
5.0 SMT Bulk 0-1571294-3
Tape and Reel 0-1571294-4
FSM Sealed Flush Actuator
FSM Sealed, Fl. 1.6 3.3 SMT Bulk 0-1571296-1
Tape and Reel 0-1571296-2
FSM Sealed Right-Angle
FSM Sealed RA 2.6 – SMT Bulk 0-1571407-1
Tape and Reel 0-1571407-2
Product Key Part Number Packaging Mounting
Height
(mm)
Actuator Force
(N)
Tape and Reel
Bulk
SMT
FSMCT Series
Products for Mobile Equipment
Switches
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
96
FSMCT Series
■Low Profile
Technical Features
Style:
5 x 5 mm
Mounting Style:
SMT
Right-Angle Versions:
No
Low Profile Versions:
No
Flush Actuator Version:
No
Different Actuator Styles:
No
ESD Ground Terminal/
Locating Post:
No/No
Sealed Versions:
No
Standard Actuation Force:
1.6 and 2.6 N
Electrical Endurance:
up to 1,000,000 cycles
Operating Temperature Range:
–20 °C up to +85 °C
Dimensions (L x W x H)
Horizontal Version:
5.2 x 5.2 x 1.5 mm
Packaging:
Tape and Reel
FSMCTTR 1.6 1.5 SMT Tape and Reel 8-1437565-0
FSMCTATR 2.6 8-1437565-1
Product Key Part Number Packaging Mounting
Height
(mm)
Actuator Force
(N)
FSM 3.5 x 6 Series
Products for Mobile Equipment
Switches
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 97
FSM 3.5 x 6 Series
■Small PCB Footprint
Technical Features
Style:
3.5 x 6 mm
Mounting Style:
THT, SMT
Right-Angle Versions:
No
Low Profile Versions:
No
Flush Actuator Version:
Available
Different Actuator Styles:
Available
ESD Ground Terminal/
Locating Post:
No/No
Sealed Versions:
Available
Standard Actuation Force:
1.3 and 1.8 N
Electrical Endurance:
up to 40,000 cycles
Operating Temperature Range:
–40 °C up to +85 °C
Dimensions (L x W x H)
Horizontal Version:
3.5 x 6.0 x 4.3 … 5.0 mm
Sealed Version:
4.7 x 6.8 x 4.3 … 5.0 mm
Packaging:
Tape and Reel, Bulk
FSMSM 4.3 SMT Bulk 1437566-3
FSMSMTR 1437566-4
FSMJM3,5ATR 1.8 3.5 0147873-3
FSMJM4,3ATR 4.3 0147873-2
FSMJM5ATR 5.0 0147873-1
FSM Sealed
FSM Sealed 5.0 SMT 1571298-2
FSM Sealed 4.3 SMT/J 1571299-2
FSM Sealed 5.0 SMT/J 1571299-4
Product Key Part Number Packaging
Tape and Reel
Tape and Reel1.3
SMT/J
Mounting
Height
(mm)
Actuator Force
(N)
1.8
FSM 0.5 mm
Products for Mobile Equipment
Switches
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
98
FSM 0.5 mm
■Ultra Low Profile
Technical Features
Style:
5 x 5 mm
Mounting Style:
SMT
Right-Angle Versions:
No
Low Profile Versions:
Standard
Flush Actuator Version:
Standard
Different Actuator Styles:
No
ESD Ground Terminal/
Locating Post:
No/No
Sealed Versions:
No
Standard Actuation Force:
1.6 N
Electrical Endurance:
up to 500,000 cycles
Operating Temperature Range:
–20 °C up to +70 °C
Dimensions (L x W x H)
Horizontal Version:
4.8 x 4.8 x 0.5 mm
Packaging:
Tape and Reel
FSM 4.8x4.8x0.5 1.6 0.5 SMT Tape and Reel 1825534-1
Product Key Part Number Packaging Mounting
Height
(mm)
Actuator Force
(N)
Turtle Style
Products for Mobile Equipment
Switches
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 99
Turtle Style
■Side Actuated Tactile
Technical Features
Style:
Turtle
Mounting Style:
SMT
Right-Angle Versions:
No
Low Profile Versions:
No
Flush Actuator Version:
No
Different Actuator Styles:
No
ESD Ground Terminal/
Locating Post:
No/Optional
Sealed Versions:
No
Standard Actuation Force:
1.6 N
Electrical Endurance:
up to 100,000 cycles
Operating Temperature Range:
–20 °C up to +85 °C
Dimensions (L x W x H)
Horizontal Version:
4.5 x 7.5 x 1.8 mm
Packaging:
Tape and Reel, Bulk
FSM Turtle 1.6 1.8 SMT Bulk 1571262-1
FSM Turtle Tape and Reel 1571262-2
Product Key Part Number Packaging Mounting
Height
(mm)
Actuator Force
(N)
CoinKey™
Products for Mobile Equipment
Switches
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
100
CoinKey is a registered trademark of
CoinKey™
■Improve the
Human Interface
Technical Features
CoinKey is a one finger operated
key with excellent input and
navigational capabilities.
With its two-ways rotation and
5 press points; left, right, top,
bottom and center, CoinKey is the
ultimate key for multi-application
handheld devices.
Its unique functionality makes it
possible to develop more efficient
and user-friendly menu systems
than with any other navigation
key in the market. We would
be happy to offer opportunity
assessment in that regard.
Documentation
Drawing:
1705448-1
Product Specification:
108-19288
Engineering Notes
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 101
MP Metalized Polyester Labels
Products for Mobile Equipment
Labels
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
102
Specifications: TTDS-074
Adhesive: Permanent Acrylic
Service Temperature: –40 °C to +150 °C
Recommended Printer: T308S✱
Recommended Ribbon: 1330-0607-10✱
✱)Alternative printers and ribbons are
available for special applications.
Contact Tyco Electronics for more
information.
Part Numbering System
MP
-
080080-10-8A
Color
Pack Size
Label Height (mm)
Label Width (mm)
Product Family
Features and Benefits
■Thermal transfer printable
■Metalized appearance
■Ideal for rating plate applications
■Several die-cut sizes available
■UL Listed and CSA Certified
Ordering Information
MP Metalized Polyester Labels
Tyco Electronics MP is a thermal transfer printable metalized
polyester film with a permanent acrylic adhesive, designed for
rating plates and other applications that require a metal look,
such as nameplates, equipment labels, detailed product
information labels and serial number plates.
MP is UL Listed and CSA Certified.
Print performance and durability are reliable when used with
Tyco Electronics’s RHD series ribbon.
MP Metalized Polyester Labels (continued)
Products for Mobile Equipment
Labels
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 103
Product
Order Code
Package
Quantity
Labels
Across
MP-040040-25-8A 25,000 20 04.0 04.0 04.0 07.2 86.0
MP-064064-25-8A 25,000 12 06.4 06.4 06.4 09.5 82.2
✱MP-080080-10-8A 10,000 0808.0 08.0 09.9 13.3 83.3
MP-089047-10-8A 10,000 0508.9 04.7 11.4 07.9 60.6
MP-095080-25-8A 25,000 0509.5 08.0 12.2 12.7 64.3
MP-095095-10-8A 10,000 0709.5 09.5 11.1 12.7 82.1
MP-127111-10-8A 10,000 05 12.7 11.1 16.8 14.3 86.0
MP-127127-10-8A 10,000 05 12.7 12.7 15.9 15.9 82.6
✱MP-165051-25-8A 25,000 04 16.5 05.1 17.8 08.3 75.8
MP-165102-10-8A 10,000 05 16.5 10.2 19.1 13.8 99.1
MP-171171-10-8A 10,000 05 17.1 17.1 19.7 20.3 101.80
✱MP-178095-10-8A 10,000 04 17.8 09.5 19.1 12.7 80.9
✱MP-191064-10-8A 10,000 04 19.1 06.4 21.6 09.5 89.9
MP-191114-15-8A 15,000 03 19.1 11.4 22.2 14.7 69.5
✱MP-203127-10-8A 10,000 04 20.3 12.7 22.9 15.9 94.6
MP-229064-10-8A 10,000 03 22.9 06.4 28.6 09.5 86.0
MP-254045-10-8A 10,000 03 25.4 04.6 31.8 08.5 95.3
MP-254064-10-8A 10,000 03 25.4 06.4 27.9 09.5 87.3
MP-254097-10-8A 10,000 03 25.4 09.7 27.9 12.7 87.4
MP-254127-10-8A 10,000 03 25.4 12.7 27.9 16.9 87.4
MP-254254-10-8A 10,000 03 25.4 25.4 27.9 28.6 87.4
✱MP-305047-10-8A 10,000 02 30.5 04.7 33.0 07.8 69.5
MP-318064-10-8A 10,000 01 31.8 06.4 N/A 09.5 37.9
MP-318097-10-8A 10,000 01 31.8 09.7 N/A 12.7 37.8
MP-381064-10-8A 10,000 01 38.1 06.4 N/A 09.5 44.5
✱MP-381127-5-8A 05,000 02 38.1 12.7 44.2 15.9 88.2
MP-381191-5-8A 05,000 02 38.1 19.1 43.2 22.2 87.6
✱MP-381381-2.5-8A 02,500 02 38.1 38.1 44.5 40.8 88.9
✱MP-381635-5-8A 05,000 02 38.1 63.5 40.6 66.7 84.7
✱MP-406254-1.5-8A 01,500 02 40.6 25.4 55.9 38.1 102.90
MP-445064-10-8A 10,000 01 44.5 06.4 N/A 09.5 50.4
MP-445102-5-8A 05,000 01 44.5 10.2 N/A 12.7 50.4
MP-445445-2-8A 02,000 01 44.5 44.5 N/A 47.6 50.4
MP-478175-5-8A 05,000 01 47.8 17.5 N/A 24.4 66.0
MP-508064-10-8A 10,000 01 50.8 06.4 N/A 09.5 56.9
MP-508095-5-8A 05,000 01 50.8 09.5 N/A 12.7 57.2
MP-508127-5-8A 05,000 01 50.8 12.7 N/A 15.9 56.9
MP-508254-5-8A 05,000 01 50.8 25.4 N/A 28.6 57.2
MP-508318-2.5-8A 02,500 01 50.8 31.8 N/A 34.9 56.9
MP-508508-3-8A 03,000 01 50.8 50.8 N/A 54.6 54.0
MP-523841-1.5-8A 01,500 01 52.3 84.1 N/A 88.9 58.2
MP-610419-2.5-8A 02,500 01 61.0 41.9 N/A 45.5 67.3
MP-699191-5-8A 05,000 01 69.9 19.1 N/A 23.3 76.2
MP-699254-5-8A 05,000 01 69.9 25.4 N/A 28.6 76.2
MP-762381-2.5-8A 02,500 01 76.2 38.1 N/A 41.3 82.3
MP-762508-2.5-8A 02,500 01 76.2 50.8 N/A 54.0 82.6
MP-762127-1-8A 01,000 01 76.2 127.00N/A 129.5079.4
MP-101508-2.5-8A 02,500 01 101.6050.8 N/A 54.6 104.10
MP-101635-2.5-8A 02,500 01 101.6063.5 N/A 66.7 107.70
MP-101762-1.8-8A 01,800 01 101.6076.2 N/A 79.4 104.10
MP-101101-1.3-8A 01,300 01 101.60101.60N/A 104.80104.10
MP-101165-0.85-8A 00,850 01 101.60165.10N/A 168.30104.90
✱)Note: Standard Format Not Compatible with T200 Printers.
Dimensions (mm)
Label Width Label Height Horizontal Repeat Vertical Repeat Web Width
A B C D E
Kapton®Labels
Products for Mobile Equipment
Labels
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
104
Specifications: T1K TTDS-034
T2K TTDS-035
TSK TTDS-085
Adhesive: Permanent Acrylic
Service Temperature:
T1K1, T2K2, TSK2, KTT2–40 °C to +260 °C
T2Y3–40 °C to +232 °C
1 Flash exposure to +472 °C
2 Flash exposure to +538 °C
3 Flash exposure to +316 °C
Recommended Printer:
T1K, T2K, TSK, T2Y, T2Y, KTT T312S✱
Recommended Ribbon: 1330-0619-10✱
✱)Alternative printers and ribbons are
available for special applications.
Contact Tyco Electronics for more
information.
Part Numbering System
T1K-044033-10-9
Color
Pack Size
Label Height (mm)
Label Width (mm)
Product Family
Features and Benefits
■UL Listed: T1K, T2K & TSK
■Thermal transfer printable
■High temperature permanent acrylic adhesive
T1K
■Gloss white topcoat
■Withstands surface mount board processes on either the top
or bottom side of the board.
■Low profile 1 mil film offers polyimide thermal performance
at competitive cost.
■Ideal for manual apply applications.
T2K
■Gloss white topcoat
■Withstands surface mount board processes on either the top
or bottom side of the board.
■Ideal for auto apply applications.
KTT
■Matte tan topcoat
■Withstands surface mount board processes on either the top
or bottom side of the board.
■Product approved for aerospace/defense applications.
■Low outgassing
TSK
■High opacity gloss white topcoat.
■Withstands surface mount board processes on either the top
or bottom side of the board.
■Deemed to be a static safe product in accordance with
EIA 625, EIA 541. Test methods employed were in accordance
with EOS/ESD S11.11.
■Ideal for auto apply applications.
T2Y
■High opacity gloss white topcoat.
■Economic alternative to T1K material.
■Withstands surface mount board processes on either the top or
bottom side of the board – can also be used on the top side of the
board in mixed processes, but it is not recommended for the bottom
side which is directly exposed to the wave solder environment.
Kapton®Labels
Tyco Electronics polyimide (Kapton®) labels are all ideal for high
temperature labeling requirements such as printed circuit boards.
They are suitable for direct wave (bottom side) and IR reflow
(top side) PCB applications. Tyco Electronics Kapton®labels are
designed to withstand the fluxes, cleaning solvents and molten
solder encountered in the manufacture of printed circuit boards.
They offer excellent contrast for bar code applications.
Tyco Electronics Kapton®labels are suitable for the harshest
high temperature applications. For reliable print performance
and durability, use with Tyco Electronics’s RHT-45 series ribbon.
Kapton®Labels (continued)
Products for Mobile Equipment
Labels
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 105
Ordering Information
T1K-044033-10-9 10,000 20 04.4 3.3 04.4 09.5 92.4
T1K-064064-25-9 25,000 12 06.4 6.4 06.4 09.5 82.2
T1K-080080-10-9 10,000 0808.0 8.0 09.9 13.3 83.3
T1K-095080-25-9 25,000 0509.5 8.0 12.2 12.7 64.3
T1K-095095-10-9 10,000 0709.5 9.5 11.1 12.7 82.1
T1K-127032-10-9 10,000 05 12.7 3.2 19.1 03.2 94.9
T1K-127111-10-9 10,000 05 12.7 11.1016.8 14.3 86.0
T1K-127127-10-9 10,000 05 12.7 12.7015.9 15.9 82.6
T1K-165051-25-9 25,000 04 16.5 5.1 17.8 08.3 75.8
T1K-171171-10-9 10,000 05 17.1 17.1019.7 20.3 101.80
T1K-178095-10-9 10,000 04 17.8 9.5 19.1 12.7 80.9
T1K-191064-10-9 10,000 04 19.1 6.4 21.6 09.5 89.9
T1K-229064-10-9 10,000 03 22.9 6.4 28.6 09.5 86.0
T1K-254045-10-9 10,000 03 25.4 4.6 31.8 08.5 95.3
T1K-254064-10-9 10,000 03 25.4 6.4 27.9 09.5 87.3
T1K-254097-10-9 10,000 03 25.4 9.7 27.9 12.7 87.4
T1K-254127-10-9 10,000 03 25.4 12.7027.9 16.9 87.4
T1K-254254-10-9 10,000 03 25.4 25.4027.9 28.6 87.4
T1K-305047-10-9 10,000 02 30.5 4.7 33.0 07.8 69.5
T1K-318064-10-9 10,000 01 31.8 6.4 N/A 09.5 37.9
T1K-381020-10-9 10,000 01 38.1 2.0 N/A 10.7 44.1
T1K-381127-5-9 05,000 02 38.1 12.7044.2 15.9 88.2
T1K-381381-2.5-9 02,500 02 38.1 38.1044.5 40.8 88.9
T1K-445064-10-9 10,000 01 44.5 6.4 N/A 09.5 50.4
T1K-445102-5-9 05,000 01 44.5 10.20N/A 12.7 50.4
T1K-508064-10-9 10,000 01 50.8 6.4 N/A 09.5 56.9
T1K-508095-5-9 05,000 01 50.8 9.5 N/A 12.7 57.2
T1K-508127-5-9 05,000 01 50.8 12.70N/A 15.9 56.9
✱)Note: Kapton®/Polyimide Labels Not Compatible with T200 Printers.
Product
Order Code
Package
Quantity
Labels
Across
Dimensions (mm)
Label Width Label Height Horizontal Repeat Vertical Repeat Web Width
A B C D E
WP White Polyester Labels
Products for Mobile Equipment
Labels
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
106
Specifications: TTDS-073
Adhesive: Permanent Acrylic
Service Temperature: –40 °C to +150 °C
Recommended Printer: T308S✱
Recommended Ribbon: 1330-0607-10✱
✱)Alternative printers and ribbons are
available for special applications.
Contact Tyco Electronics for more
information.
WP White Polyester Labels
Tyco Electronics WP is a thermal transfer printable white
polyester film with a permanent acrylic adhesive. It is ideal for
bar coding, PCB and component labeling, as well as general
purpose labeling applications that require a high durability white
label. WP is resistant to a variety of solvents while maintaining
print quality.
It is UL Listed and CSA Certified, and print performance
and durability are reliable when used with Tyco Electronics’s
RHD series ribbon.
Features and Benefits
■Thermal transfer printable
■Excellent for use in PCB component labeling
■Ink receptive topcoat
■Excellent for bar code applications
■UL Listed and CSA Certified
Ordering Information
Part Numbering System
WP
-
040040-10-9
Color
Pack Size
Label Height (mm)
Label Width (mm)
Product Family
WP White Polyester Labels (continued)
Products for Mobile Equipment
Labels
Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 107
Product
Order Code
Package
Quantity
Labels
Across
WP-040040-25-9 25,000 20 04.0 04.0 04.0 07.2 86.0
WP-064064-25-9 25,000 12 06.4 06.4 06.4 09.5 82.2
✱WP-080080-10-9 10,000 0808.0 08.0 09.9 13.3 83.3
WP-089047-10-9 10,000 0508.9 04.7 11.4 07.9 60.6
WP-095080-25-9 25,000 0509.5 08.0 12.2 12.7 64.3
WP-095095-10-9 10,000 0709.5 09.5 11.1 12.7 82.1
WP-127111-10-9 10,000 05 12.7 11.1 16.8 14.3 86.0
WP-127127-10-9 10,000 05 12.7 12.7 15.9 15.9 82.6
✱WP-165051-25-9 25,000 04 16.5 05.1 17.8 08.3 75.8
WP-165102-10-9 10,000 05 16.5 10.2 19.1 13.8 99.1
WP-171171-10-9 10,000 05 17.1 17.1 19.7 20.3 101.80
✱WP-178095-10-9 10,000 04 17.8 09.5 19.1 12.7 80.9
✱WP-191064-10-9 10,000 04 19.1 06.4 21.6 09.5 89.9
WP-191114-15-9 15,000 03 19.1 11.4 22.2 14.7 69.5
✱WP-203127-10-9 10,000 04 20.3 12.7 22.9 15.9 94.6
WP-229064-10-9 10,000 03 22.9 06.4 28.6 09.5 86.0
WP-254045-10-9 10,000 03 25.4 04.6 31.8 08.5 95.3
WP-254064-10-9 10,000 03 25.4 06.4 27.9 09.5 87.3
WP-254097-10-9 10,000 03 25.4 09.7 27.9 12.7 87.4
WP-254127-10-9 10,000 03 25.4 12.7 27.9 16.9 87.4
WP-254254-10-9 10,000 03 25.4 25.4 27.9 28.6 87.4
✱WP-305047-10-9 10,000 02 30.5 04.7 33.0 07.8 69.5
WP-318064-10-9 10,000 01 31.8 06.4 N/A 09.5 37.9
WP-318097-10-9 10,000 01 31.8 09.7 N/A 12.7 37.8
WP-381064-10-9 10,000 01 38.1 06.4 N/A 09.5 44.5
✱WP-381127-5-9 05,000 02 38.1 12.7 44.2 15.9 88.2
WP-381191-5-9 05,000 02 38.1 19.1 43.2 22.2 87.6
✱WP-381381-2.5-9 02,500 02 38.1 38.1 44.5 40.8 88.9
✱WP-381635-5-9 05,000 02 38.1 63.5 40.6 66.7 84.7
✱WP-406254-1.5-9 01,500 02 40.6 25.4 55.9 38.1 102.90
WP-445064-10-9 10,000 01 44.5 06.4 N/A 09.5 50.4
WP-445102-5-9 05,000 01 44.5 10.2 N/A 12.7 50.4
WP-445445-2-9 02,000 01 44.5 44.5 N/A 47.6 50.4
WP-478175-5-9 05,000 01 47.8 17.5 N/A 24.4 66.0
WP-508064-10-9 10,000 01 50.8 06.4 N/A 09.5 56.9
WP-508095-5-9 05,000 01 50.8 09.5 N/A 12.7 57.2
WP-508127-5-9 05,000 01 50.8 12.7 N/A 15.9 56.9
WP-508254-5-9 05,000 01 50.8 25.4 N/A 28.6 57.2
WP-508318-2.5-9 02,500 01 50.8 31.8 N/A 34.9 56.9
WP-508508-3-9 03,000 01 50.8 50.8 N/A 54.6 54.0
WP-523841-1.5-9 01,500 01 52.3 84.1 N/A 88.9 58.2
WP-610419-2.5-9 02,500 01 61.0 41.9 N/A 45.5 67.3
WP-699191-5-9 05,000 01 69.9 19.1 N/A 23.3 76.2
WP-699254-5-9 05,000 01 69.9 25.4 N/A 28.6 76.2
WP-762254-5-9 05,000 01 76.2 25.4 N/A 28.6 82.3
WP-762381-2.5-9 02,500 01 76.2 38.1 N/A 41.3 82.3
WP-762508-2.5-9 02,500 01 76.2 50.8 N/A 54.0 82.6
WP-762127-1-9 01,000 01 76.2 127.00N/A 129.5079.4
WP-101508-2.5-9 02,500 01 101.6050.8 N/A 54.6 104.10
WP-101635-2.5-9 02,500 01 101.6063.5 N/A 66.7 107.70
WP-101762-1.8-9 01,800 01 101.6076.2 N/A 79.40104.10
WP-101101-1.3-9 01,300 01 101.60101.60N/A 104.80104.10
WP-101165-0.85-9 00,850 01 101.60165.10N/A 168.30104.90
✱)Note: Standard Format Not Compatible with T200 Printers.
Dimensions (mm)
Label Width Label Height Horizontal Repeat Vertical Repeat Web Width
A B C D E
Engineering Notes
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
108
Numerical Index
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 109
Part Number Page
147873-1 97
147873-2 97
147873-3 97
2-292292-4 10
2-292292-5 10
2-292292-6 10
2-292292-7 10
2-292292-8 10
2-292292-9 10
3-292292-0 10
3-292292-1 10
292331-1 41
292331-2 41
292331-3 41
292331-5 41
2-292373-6 10
2-292373-7 10
2-292373-8 10
2-292373-9 10
3-292373-0 10
3-292373-1 10
3-292373-2 10
292448-1 41
1-338063-9 7
2-338063-0 7
2-338063-1 7
2-338063-2 7
2-338063-3 7
2-338063-4 7
2-338063-5 7
2-338063-6 7
2-338063-7 7
2-338063-8 7
2-338063-9 7
3-338063-0 7
3-338063-1 7
3-338063-2 7
3-338063-3 7
3-338063-4 7
3-338063-5 7
3-338063-6 7
3-338063-7 7
3-338063-8 7
3-338063-9 7
4-338063-0 7
1-338123-9 8
2-338123-0 8
2-338123-1 8
Part Number Page Part Number Page Part Number Page
2-338123-2 8
2-338123-3 8
2-338123-4 8
2-338123-5 8
2-338123-6 8
2-338123-7 8
2-338123-8 8
2-338123-9 8
3-338123-0 8
3-338123-1 8
3-338123-2 8
3-338123-3 8
3-338123-4 8
3-338123-5 8
3-338123-6 8
3-338123-7 8
3-338123-8 8
3-338123-9 8
4-338123-0 8
338610-1 25
338966-9 21
1-338967-2 21
338970-1 31
368555-1 23
368560-1 23
368565-1 23
368637-3 27
440217-1 16
440217-2 16
440297-1 25
440297-2 25
440297-3 25
440297-4 25
440343-1 16
440423-1 30
440430-1 30
440432-1 30
5-619028-2 35
619052-1 34
619061-1 33
619062-1 33
619068-1 34
619072-1 33
5-619078-2 35
619196-1 37
619201-1 36
619210-1 37
5-619211-1 37
619213-1 38
619214-1 38
619217-1 38
619229-1 54
619231-1 36
619238-2 54
900688-1 39
900712-1 39
900795-1 39
900905-1 39
900965-1 39
900971-1 39
900988-1 39
1279154-1 39
1377032-2 16, 17
1377032-3 16, 17
1-1377227-9 7
2-1377227-0 7
2-1377227-1 7
2-1377227-2 7
2-1377227-3 7
2-1377227-4 7
2-1377227-5 7
2-1377227-6 7
2-1377227-7 7
2-1377227-8 7
2-1377227-9 7
3-1377227-0 7
3-1377227-1 7
3-1377227-2 7
3-1377227-3 7
3-1377227-4 7
3-1377227-5 7
3-1377227-6 7
3-1377227-7 7
3-1377227-8 7
3-1377227-9 7
4-1377227-0 7
1377269-2 39
1437259-6 30
1-1437565-6 95
1-1437565-7 95
1-1437565-8 95
1-1437565-9 95
2-1437565-7 95
2-1437565-8 95
2-1437565-9 95
3-1437565-0 95
4-1437565-1 95
4-1437565-2 95
4-1437565-9 95
5-1437565-0 95
8-1437565-0 96
8-1437565-1 96
1437566-3 97
1437566-4 97
9-1442000-8 51
6-1442001-0 51
6-1442001-3 51
8-1442001-6 51
1-1442002-5 51
6-1442002-7 55
7-1442002-1 55
7-1442002-2 55
7-1442002-3 55
9-1442002-7 51
2-1442003-2 51
3-1442003-2 50
5-1442003-9 51
1442004-1 54
1447009-5 30
1447009-6 30
1447009-8 30
1447360-9 30
1-1447360-1 30
1470033-1 16
1470139-1 25
1470139-2 25
1470139-3 25
1470164-1 16
1470177-1 17
1470177-2 17
1470332-1 25
1470636-1 16
1470778-1 16
1470864-1 25
1470964-1 16
1-1483288-9 7
2-1483288-0 7
2-1483288-1 7
2-1483288-2 7
2-1483288-3 7
2-1483288-4 7
2-1483288-5 7
2-1483288-6 7
2-1483288-7 7
Numerical Index
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
110
Part Number Page
2-1483288-8 7
2-1483288-9 7
3-1483288-0 7
3-1483288-1 7
3-1483288-2 7
3-1483288-3 7
3-1483288-4 7
3-1483288-5 7
3-1483288-6 7
3-1483288-7 7
3-1483288-8 7
3-1483288-9 7
4-1483288-0 7
1-1483437-9 7
2-1483437-0 7
2-1483437-1 7
2-1483437-2 7
2-1483437-3 7
2-1483437-4 7
2-1483437-5 7
2-1483437-6 7
2-1483437-7 7
2-1483437-8 7
2-1483437-9 7
3-1483437-0 7
3-1483437-1 7
3-1483437-2 7
3-1483437-3 7
3-1483437-4 7
3-1483437-5 7
3-1483437-6 7
3-1483437-7 7
3-1483437-8 7
3-1483437-9 7
4-1483437-0 7
1483596-1 17
1483596-2 17
1483748-1 30
1483940-1 39
1483960-1 39
1496476-1 18
1496476-2 18
1496476-3 18
1496476-4 18
1496476-5 18
1496476-6 18
1496476-8 18
1565158-1 30
Part Number Page Part Number Page Part Number Page
1565322-1 30
1571262-1 99
1571262-2 99
1571294-1 95
1571294-2 95
1571294-3 95
1571294-4 95
1571296-1 95
1571296-2 95
1571299-2 97
1571299-4 97
1571407-1 95
1571407-2 95
1571527-1 95
1571527-2 95
1571563-1 95
1571563-2 95
1571563-3 95
1571563-4 95
1-1571563-1 95
1-1571563-2 95
1571598-2 97
1571625-5 95
1571625-6 95
1571626-5 95
1571626-6 95
1571636-5 95
1571636-6 95
1612493-1 39
1612534-1 46
1612537-1 46
1612633-1 22
1612634-1 22
1612681-1 39
1612898-1 43
1612901-1 43
1674162-1 25
1674319-1 25
1674432-1 22
1674783-1 39
1674787-1 22
1674977-1 39
1674977-2 39
1705030-1 39
1705058-1 16
1705130-1 39
1705254-1 39
1-1705300-5 9
1-1705300-6 9
1-1705300-7 9
1-1705300-8 9
1-1705300-9 9
2-1705300-0 9
2-1705300-1 9
2-1705300-2 9
2-1705300-3 9
2-1705300-4 9
1705336-2 32
1705448-1 99
1-1705615-3 10
1-1705615-4 10
1-1705615-5 10
1-1705615-6 10
1-1705615-7 10
1-1705615-8 10
1-1705615-9 10
2-1705615-0 10
1705795-1 39
1-1705813-2 12
1-1705813-3 12
1-1705813-4 12
1-1705813-5 12
1-1705813-6 12
1-1705813-7 12
1-1705813-8 12
1-1705813-9 12
1717017-1 39
1717029-1 39
1717169-1 22
1717257-1 39
1717273-1 42
1717294-1 39
1717312-1 22
1717400-1 39
1717406-1 42
1717413-1 42
1717431-1 25
1717562-1 42
1717838-1 42
1717989-1 39
1720028-2 30
1734035-1 19
1734035-3 19
1734035-4 19
1-1734035-1 19
1-1734035-3 19
1734205-1 18
1-1734205-1 18
3-1734205-1 18
4-1734205-1 18
1734234-1 25
1734234-2 25
1734234-3 25
1734234-4 25
1734300-1 30
1734472-1 25
1734472-2 25
1734472-3 25
1-1734472-1 25
1-1734472-2 25
1-1734472-3 25
1746116-1 39
1746136-1 30
1746142-1 42
1746223-1 22
1746237-1 15
1746237-2 15
1746237-3 15
1746237-4 15
1746237-5 15
1746237-6 15
1746237-7 15
1746237-8 15
1746237-9 15
1-1746237-0 15
1-1746237-1 15
1-1746237-2 15
1-1746237-3 15
1-1746237-4 15
1-1746237-5 15
1-1746237-6 15
1-1746237-7 15
1-1746237-8 15
1-1746237-9 15
2-1746237-0 15
2-1746237-1 15
2-1746237-2 15
2-1746237-3 15
2-1746237-4 15
1746716-1 22
1746717-1 22
1746730-1 39
1746750-1 39
1746751-1 39
Numerical Index
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications. 111
Part Number Page
1746773-1 39
1746931-1 39
1747103-1 39
1747124-2 22
1747129-1 42
1747314-1 10
1-1747769-0 14
1-1747769-2 14
1-1747769-6 14
2-1747769-0 14
2-1747769-2 14
2-1747769-4 14
2-1747769-8 14
3-1747769-0 14
4-1747769-6 14
5-1747769-0 14
5-1747769-4 14
5-1747769-6 14
6-1747769-0 14
7-1747769-0 14
8-1747769-0 14
1750516-1 18
1775012-1 25
1775055-1 19
1775059-1 25
1775067-1 25
1775204-1 25
1775250-1 16
1825534-1 98
1827000-1 42
1827034-1 25
1827349-1 22
1827465-1 12
1827541-1 23
1827546-1 23
1827674-1 15
1827674-2 15
1827674-3 15
1827674-4 15
1827674-5 15
1827674-6 15
1827674-7 15
1827674-8 15
1827674-9 15
1-1827674-0 15
1-1827674-1 15
1-1827674-2 15
1-1827674-3 15
Part Number Page Part Number Page Part Number Page
1-1827674-4 15
1-1827674-5 15
1-1827674-6 15
1-1827674-7 15
1-1827674-8 15
1-1827674-9 15
2-1827674-0 15
2-1827674-1 15
2-1827674-2 15
2-1827674-3 15
2-1827674-4 15
1827827-1 15
1827827-2 15
1827827-3 15
1827827-4 15
1827827-5 15
1827827-6 15
1827827-7 15
1827827-8 15
1827827-9 15
1-1827827-0 15
1-1827827-1 15
1-1827827-2 15
1-1827827-3 15
1-1827827-4 15
1-1827827-5 15
1-1827827-6 15
1-1827827-7 15
1-1827827-8 15
1-1827827-9 15
2-1827827-0 15
2-1827827-1 15
2-1827827-2 15
2-1827827-3 15
2-1827827-4 15
1827928-1 42
1857118-1 13
1857258-1 44
1857346-1 45
1857353-1 17
1857353-2 17
1857724-4 30
1871250-3 25
1871250-4 25
1-1871274-0 14
1-1871274-2 14
1-1871274-6 14
2-1871274-0 14
2-1871274-2 14
2-1871274-4 14
2-1871274-8 14
3-1871274-0 14
4-1871274-0 14
4-1871274-6 14
5-1871274-0 14
5-1871274-4 14
5-1871274-6 14
6-1871274-0 14
7-1871274-0 14
8-1871274-0 14
1-1871275-0 14
1-1871275-2 14
1-1871275-6 14
2-1871275-0 14
2-1871275-2 14
2-1871275-4 14
2-1871275-8 14
3-1871275-0 14
4-1871275-0 14
4-1871275-6 14
5-1871275-0 14
5-1871275-4 14
5-1871275-6 14
6-1871275-0 14
7-1871275-0 14
8-1871275-0 14
1871406-1 10
1-1871566-0 14
1-1871566-2 14
1-1871566-6 14
2-1871566-0 14
2-1871566-2 14
2-1871566-4 14
2-1871566-8 14
3-1871566-0 14
4-1871566-0 14
4-1871566-6 14
5-1871566-0 14
5-1871566-4 14
5-1871566-6 14
6-1871566-0 14
7-1871566-0 14
8-1871566-0 14
1871583-1 25
1871583-2 25
1871583-3 25
1871583-4 25
1871602-1 25, 26
1871602-2 25, 26
1871813-1 42
1871916-1 25
1903290-1 28
1903302-1 25
1939053-1 20
1939054-1 20
1981568-1 20
1981584-1 20
1981812-1 47
1981813-1 47
1981898-1 11
5338979-1 21
5338979-2 21
5338980-1 21
5338982-1 21
5338982-2 21
6337194-1 40
Engineering Notes
Products for Mobile Equipment Catalog 1654270-2
Revised 8-2007
All specifications subject to change. Consult Tyco Electronics for latest specifications.
112
www.tycoelectronics.com
Global Contacts
Americas
Asia/Pacific
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Fax: +54-11-4733-2211
Brasil – São Paulo
Phone: +55-11-3611-1311
Fax: +55-11-3611-0397
Canada – Toronto
Phone: +905-475-6222
Fax: +905-474-5520
Product Information Center:
Phone: +905-470-4425
Fax: +905-474-5525
Colombia – Bogota
Phone: +57-1-231-9398
Fax: +57-1-660-0206
Mexico – Mexico City
Phone: +52-55-1106-0800
+01-800-733-8926
Fax: +52-55-1106-0901
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
Australia – Sydney
Phone: +61-2-9554-2600
Fax: +61-2-9502-2556
Product Information Center:
Phone: +61-2-9840-8200
Fax: +61-2-9634-6188
India – Bangalore
Phone: +91-80-285-40800
Fax: +91-80-285-40820
Indonesia – Jakarta
Phone: +65-6482-0311
Fax: +65-6482-1012
Japan – Kawasaki, Kanagawa
Phone: +81-44-844-8111
Fax: +81-44-812-3207
Product Information Center:
Phone: +81-44-844-8013
Fax: +81-44-812-3200
Korea – Seoul
Phone: +82-2-3415-4500
Fax: +82-2-3486-3810
Malaysia – Selangor
Phone: +60-3-7805-3055
Fax: +60-3-7805-3066
New Zealand – Auckland
Phone: +64-9-634-4580
Fax: +64-9-634-4586
Philippines – Makati City
Phone: +632-848-0171
Fax: +632-867-8661
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax: +852-2735-0243
Shanghai
Phone: +86-21-2407-1588
Fax: +86-21-2407-1599
Singapore – Singapore
Phone: +65-6482-0311
Fax: +65-6482-1012
Taiwan – Taipei
Phone: +886-2-8768-2788
Fax: +886-2-8768-2268
Thailand – Bangkok
Phone: +66-2-955-0500
Fax: +66-2-955-0505
Vietnam – Ho Chi Minh City
Phone: +84-8-930-5546
Fax: +84-8-930-3443
United States
Harrisburg, PA
Phone: +1-717-564-0100
Fax: +1-717-986-7575
Product Information Center:
Phone: +1-800-522-6752
Fax: +1-717-986-7575
Troy, MI
Phone: +1-248-273-3359
Fax: +1-248-273-3322
Europe/Middle East/Africa
Austria – Vienna
Phone: +43-1-905-60-0
Fax: +43-1-905-60-1333
Product Information Center:
Phone: +43-1-905-60-1249
Fax: +43-1-905-60-1251
Belgium – Kessel-Lo
Phone: +32-16-352-300
Fax: +32-16-352-352
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax: +359-2-971-2153
Czech Republic and Slovakia
Czech Republic – Kurim
Phone: +420-541-162-111
Fax: +420-541-162-223
Product Information Center:
Phone: +420-541-162-113
Fax: +420-541-162-132
Denmark – Glostrup
Phone: +45-43-48-04-00
Fax: +45-43-44-14-14
Egypt – Cairo
Phone: +202-419-2334
Fax: +202-417-7647
Estonia – Tartu
Phone: +372-5138-274
Fax: +372-7400-779
Finland – Helsinki
Phone: +358-95-12-34-20
Fax: +358-95-12-34-250
France – Cergy-Pontoise Cedex
Phone: +33-1-3420-8888
Fax: +33-1-3420-8600
Product Information Center:
Phone: +33-1-3420-8686
Fax: +33-1-3420-8623
France Export Divisions –
Cergy-Pontoise Cedex
Phone: +33-1-3420-8808
Fax: +33-1-3420-8300
Germany – Bensheim
Phone: +49-6251-133-0
Fax: +49-6251-133-1600
Product Information Center:
Phone: +49-6251-133-1999
Fax: +49-6251-133-1988
Greece – Athens
Phone: +30-210-9370-396/397
Fax: +30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax: +36-1-289-1010
Product Information Center:
Phone: +36-1-289-1016
Fax: +36-1-289-1017
Ireland – Dublin
Phone: +353-1-866-5612
Fax: +353-1-866-5714
Israel – Petach-Tikva
Phone: +972-3-929-0999
Fax: +972-3-919-1088
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax: +39-011-4031-116
Product Information Center:
Phone: +39-011-4012-428
Fax: +39-011-40-287-428
Lithuania and Latvia
Lithuania – Vilnius
Phone: +370-5-213-1402
Fax: +370-5-213-1403
Product Information Center:
Phone: +370-5-211-3016
Fax: +370-5-213-1403
Netherlands – ’s-Hertogenbosch
Phone: +31-73-6246-246
Fax: +31-73-6212-365
Product Information Center:
Phone: +31-73-6246-999
Fax: +31-73-6246-998
Norway – Nesbru
Phone: +47-66-77-88-50
Fax: +47-66-77-88-55
Poland – Warsaw
Phone: +48-22-4576-700
Fax: +48-22-4576-720
Product Information Center:
Phone: +48-22-4576-704
Fax: +48-22-4576-720
Romania – Bucharest
Phone: +40-21-311-3479/3596
Fax: +40-21-312-0574
Russia – Moscow
Phone: +7-495-790-7902
Fax: +7-495-721-1893
Product Information Center:
Phone: +7-495-790-7902-502
Fax: +7-495-721-1893
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax: +7-812-718-8193
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax: +386-1561-3240
South Africa – Port Elizabeth
Phone: +27-41-503-4500
Fax: +27-41-581-0440
Spain – Barcelona
Phone: +34-93-291-0330
Fax: +34-93-201-7879
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax: +46-8-50-72-50-01
Switzerland – Steinach
Phone: +41-71-447-0447
Fax: +41-71-447-0444
Turkey – Istanbul
Phone: +90-212-281-8181-83
+90-212-282-5130/5430
Fax: +90-212-281-8184
Ukraine – Kiev
Phone: +380-44-206-2265
Fax: +380-44-206-2264
Product Information Center:
Phone: +380-44-206-2265
Fax: +380-44-206-2264
United Kingdom –
Stanmore, Middlesex
Phone: +44-8706-080208
Fax: +44-208-954-6234
Product Information Center:
Freephone (UK only):
+0800-267-666
Phone: +44-8706-080208
Fax: +44-208-420-8095
Tyco Electronics AMP GmbH
AMPèrestr. 12–14
64625 Bensheim / Germany
Phone: +49-(0)6251-133-0
Fax: +49-(0)6251-133-1600
www.tycoelectronics.com
AMP, ELASTIBOOT, KAPTON, LAMFRAME,
M/A-COM, RAYCHEM, STAX, TE Logo and
Tyco Electronics are trademarks
© 2007 Tyco Electronics Ltd.
1654270-2 Revised 8-2007 5M ST
