PGFI Series 30 Amp Portable Series (Cord) GFCI / ELCI INTRODUCTION The LineGardTM 30 Amp Portable Series is an industrial grade ground fault interrupter device designed and manufactured by North Shore Safety, Ltd., a leader in innovated safety products. Available with an operating voltage of 120 VAC, 208 VAC, 240 VAC or 277 VAC (UL 1053 compliant), this product can be integrated during after-market equipment upgrades or used as a stand-alone portable cordset. All units are MADE IN THE USA and are listed per UL 943 and CSA 22.2 No.144. Note that any power cord integrated with this GFCI becomes OSHA compliant for portable power usage in confinded space: OSHA 29 CFR 1926.404 (b)(1)(ii) and OSHA 29 CFR 1926.405 (a)(2)(ii)(G). Additionally, these devices meet NEC requirement 590.6 (a) and (b). FEATURES Specifications Listing Type * Power and fault status indicators * * * * Double insulated user interface Industrial design for rough service Chemical and UV resistant enclosure cULus Listed as a Class A GFCI per UL 943 and CSA 22.2 No. 144 * 30 amp, 3-wire configurations in 120VAC, 208 VAC, 240 VAC or 277 VAC (UL 1053) * NEMA 4X and 6P wet location rated (indoor / outdoor) * Available in automatic or manual reset configurations* Rated Supply Voltage Rated Current Trip Level, Class A Operating Frequency 1 Reset Type Response Time Operating Temperature Operating Voltage Range Let-Go Voltage Open Neutral Protection2 Grounded Neutral Protection2 cULus Listed Class A UL 943 CSA 22.2 No. 144 120 VAC, 240 VAC, 208 VAC, 277 VAC (UL 1053 compliant) Up to 30 Amps or rating of wiring device and/or cable 5mA +/- 1mA (UL 943) 60 Hz Automatic or Manual 25mS max -35C to 66C 85% to 110% of rated VAC 60% of supply voltage Trips upon loss of neutral Trips if ground and neutral touch at load side 1. Manual configuration should be specified if automatic start-up after power restoration of circuit power creates an unsafe condition. 2. Applicable models only 274 PGFI Series - 30 Amp Portable (Cord) Series http://airpax.sensata.com/ Confined Space Construction Sites Application Opportunities: (NEC 590.6) Commercial Garages (NEC 511.12) Outdoor Signs (NEC 600.10) Fountains & Water Displays (NEC 680.58) Spa & Hot Tubs (NEC 680.40) Marinas & Boat Yards Electrical wet locations Power generators Agricultural equipment Outdoor electrical equipment Cement cutting equipment Portable electric heaters Submersible pumps Pipeline heaters Automotive garages Industrial part washers Outdoor signage De-icing equipment (roof heaters) OSHA 29 CFR 1926.404 (b)(1)(ii), OSHA 29 CFR 1926.405 (a)(2)(ii)(G) (NEC 555.3) Ground Fault / Equipment Leakage RELATED CODES DECISION TABLES PGFI - 2 3 0 1 N 1 Product Type 1 6 Connector N None 1 Locking 2 Voltage 3 Ampacity 4 Reset Type 1 120 VAC 3 0 Manual 1 2' yellow, 10/3, SJEOOW cable 2 240 VAC 1 Automatic 2 25' yellow, 10/3, SJEOOW cable 9 208 VAC 3 50' yellow, 10/3, SJEOOW cable D 277 VAC 5 6' yellow, 10/3, SJEOOW cable Note: 30 amps (see notes) 5 Cable Configuration 1. Manual configuration should be specified if automatic power-up, after power restoration of circuit power, could create an unsafe condition. 2. Units are configured with SJTW cable and molded locking non-watertight connectors configured to 30 Amps. 3. Custom cord sets are available. Please consult Airpax for other options NEMA and IEC 309 Connectors available http://airpax.sensata.com/ PGFI Series - 30 Amp Portable (Cord) Series 275