Web page Sample & buy Tools & software Support & FAQ Document 484-1 Shielded Power Inductor For National Semiconductor LM5115 DC Controller IC The D1787-AL was developed for use with the National Semiconductor LM5115 Secondary Side Post Regulator Controller and LM5025 Primary Side Controller. This flat wire power inductor offers extremely low dc resistance and very high current ratings (up to 23 Arms). The flat core allows for exceptional heat dissipation and provides an excellent surface for pick and place operation. This inductor is ideal for power supply applications where high current handling is essential and is perfect for lowvoltage dc-dc converters. Custom inductance values are also possible. Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. DCR SRF Part Inductance1 max typ2 number 10% (H) (mOhms) (MHz) D1787-AL 33.0 2.8 9.0 Isat3 Irms4 (A) (A) 8.0 23.0 Temperature Rise vs Current Temperature rise (from 25C) 1. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using Coilcraft SMDD fixture in Agilent/HP 4284A impedance analyzer. 2. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft SMDD test fixture. 3. DC current at which the inductance drops 20% (typ) from its value without current. Click for temperature derating information. 4. Current that causes a 40C rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 5. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS tin-silver (96.5/3.5) over copper Weight 34.9 g Ambient temperature -40C to +85C with (40C rise) Irms current. Maximum part temperature +125C (ambient + temp rise). Derating. Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 25 pieces per tray PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. 50 45 40 35 30 25 20 15 10 5 0 0 5 10 15 20 25 30 35 Current (A rms) US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 484-1 Revised 09/10/15 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 484-2 SMT Power Inductor - D1787-AL Typical L vs Frequency Typical L vs Current 1000 Inductance (H) Inductance (H) 1000 100 10 100 10 0.1 10 1 100 0.1 D1787-AL XXXXY 100 Current (A) 1.10 max 27,9 1.100 max 27,94 10 1 Frequency (MHz) Recommended Land Pattern 0.77 max 19,6 Parts manufactured prior to December 2011 may be marked differently. CL 0.455 11,56 0.220 5,59 0.160 4,06 0.240 6,10 0.210 5,33 0.190 4,83 0.655 max 16,6 0.004/0,102 Dimensions are in inches mm 0.150 3,8 0.270 6,9 US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 484-2 Revised 09/10/15 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: D1787-AL