Sil-Pad 1100ST (R) Affordable, Electrically Insulating,Thermally Conductive, Soft Tack Elastomeric Material Features and Benefits TYPICAL PROPERTIES OF SIL-PAD 1100ST * Inherent tack on both sides for exceptional thermal performance and easy placement PROPERTY Color * Re-positionable for higher utilization, ease of use and assembly error reduction IMPERIAL VALUE Yellow METRIC VALUE Yellow Reinforcement Carrier Fiberglass Fiberglass -- Thickness (inch) / (mm) 0.012 0.305 ASTM D374 2 2 -- Inherent Surface Tack (1or 2 sided) TEST METHOD Visual * Lined on both sides for ease of handling prior to placement in high volume assemblies Hardness (Shore 00) (1) 85 85 ASTM D2240 Breaking Strength (lb/inch) / (kN/m) 2.6 0.5 ASTM D1458 Elongation (% - 45 to Warp and Fill) 16 16 ASTM D412 * Exhibits exceptional thermal performance even at a low mounting pressure Tensile Strength (psi) / (MPa) 220 1.5 ASTM D412 -76 to 356 -60 to 180 -- * Fiberglass reinforced ELECTRICAL Dielectric Breakdown Voltage (Vac) 5000 5000 ASTM D149 * Value alternative to Sil-Pad 1500ST Dielectric Constant (1000 Hz) 5.0 5.0 ASTM D150 Volume Resistivity (Ohm-meter) 1010 1010 ASTM D257 Flame Rating V-O V-O U.L. 94 1.1 1.1 ASTM D5470 Continuous Use Temp (F) / (C) THERMAL Thermal Conductivity (W/m-K) THERMAL PERFORMANCE VS. PRESSURE Pressure (psi) TO-220 Thermal Performance (C/W) 10 2.72 25 2.71 50 2.68 100 2.62 200 2.23 Thermal Impedance (C-in2/W) (2) 0.75 0.71 0.66 0.61 0.57 1) Thirty second delay value Shore 00 hardness scale. 2) The ASTM D5470 test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. Sil-Pad 1100ST (Soft Tack) is a fiberglassreinforced thermal interface material featuring inherent tack on both sides.The material exhibits excellent thermal performance at low mounting pressures.The material is supplied on two liners for exceptionally easy handling prior to auto-placement in high-volume assemblies.The material is ideal for placement between an electronic power device and its heat sink. Typical Applications Include: * Automotive ECMs * Motor controls * Power supplies * Between an electronic power device and its heat sink Configurations Available: * Sheet form, die-cut parts and roll form * Top and bottom liners Building a Part Number Standard Options Sil-Pad (R): U.S. Patents 4,574,879; 4,602,125; 4,602,678; 4,685,987; 4,842,911 and others www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 The Bergquist Company European Headquarters Bramenberg 9a, 3755 BT Eemnes Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company - Asia Room 15, 8/F Wah Wai Industrial Centre No. 38-40, Au Pui Wan Street Fotan, Shatin, N.T. Hong Kong Ph: 852.2690.9296 Fax: 852.2690.2344 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_SP_1100ST_12.08 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: SP1100ST-0.012-02-1212