Type CRG Series
Precious metal terminations are
screen printed onto a ceramic base
and fired. The resistive element is
screen printed and fired and the
passivation layer added. Each
resistor is trimmed to
tolerance by laser. The pre-scribed
tile is broken into strips, the end
plating is fired on and the strips
broken into individual components.
Final termination is made by
electroplating.
Key Features
IThick film resistors with
a high power to size
ratio,ideally suited to
industrial and general
purpose use.
A range from 1 ohm to
10M and tolerances of
1% and 5%. Also
including zero ohm links.
ISuitable for most
applications, including
high frequency
operation, owing to the
short lead structure and
low capacitance.
ISix Package Sizes
Characteristics -
Electrical
0402 0603 0805
Rated Power @ 70 °C (W) 0.063 0.1 0.125
Resistance Range Min 10 1 11 1 101 1 11 1 101 1 11
(Ohms) Max 2M0 10 3M3 100 1M0 10 10M 100 1M0 10 10M
Tolerance (%) 1 5 5 1155 1155
Code letter FJJFFJJFFJJ
Selection Series E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24
E96 E96
Temp. Coefficient (ppm/°C) ±100 ±400 ±200 ±200 ±100 ±200 ±200 ±200 ±100 ±400 ±200
Dimensions
Style L W t a b
0402 1.0 ±0.1 0.5 ±0.05 0.35 ±0.05 0.2 ±0.1 0.25 ±0.1
0603 1.6 ±0.1 0.8 ±0.15 0.45 ±0.1 0.3 ±0.2 0.3 ±0.1
0805 2.0 ±0.15 1.25 ±0.15 0.55 ±0.1 0.4 ±0.2 0.4 ±0.2
1206 3.1 ±0.15 1.55 ±0.15 0.55 ±0.1 0.45 ±0.2 0.45 ±0.2
2010 5.0 ±0.1 2.5 ±0.15 0.55 ±0.1 0.6 ±0.25 0.5 ±0.2
2512 6.35 ±0.1 3.2 ±0.15 0.55 ±0.1 0.6 ±0.25 0.5 ±0.2
1206 2010 2512
Rated Power @ 70 °C (W) 0.25 0.5 1
Resistance Range Min 1 101 1 11 1 101 1 11 1 101 1 11
Ohms Max 100 1M0 10 10M 100 1M0 10 10M 100 1M0 10 10M
Tolerance (%) 11 5 511 55 115 5
Code letter FF J JFF J J FFJ J
Selection Series E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24
E96 E96 E96
Temp. Coefficient (ppm/°C) ±200 ±100 ±400 ±200 ±200 ±100 ±400 ±200 ±200 ±100 ±400 ±200
0402 0603 0805 1206 2010 2512
Working Voltage (V) 50 50 150 200 200 200
Max. Overload Voltage (V) 50 100 300 400 400 400
Operating Temp. Range (°C) -55 to +125
Climatic Category (°C) 55/125/56
Insulation Resistance Dry 1000
Min (Mohms)
Stability (%) 3
Surface Temp. Rise Max
480 300 280 190 100 65
(°C/W)
Zerohm (A) Current Max
112 222
Resistance Max
<20 mohm
L
a
W
t
b
Thick Film Chip Resistors
Type CRG Series
Literature No. 1773204
Issued: 06-09
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com
Marking Codes -
Case Sizes 0805 to 2512
Resistance 100Ω 2.2KΩ 10KΩ 49.9KΩ 100KΩ
Marking Code 1000 2201 1002 4992 1003
IEC 4 Digit Marking
Case Sizes 0603
E24 10 11 12 13 15 16 18 20 22 24 27 30
33 36 39 43 47 51 56 62 68 75 82 91
E24 3 Digit Marking - Example: 101=100Ω 102=1KΩ
Code E96 Code E96 Code E96 Code E96
01 100 25 178 49 316 73 562
02 102 26 182 50 324 74 576
03 105 27 187 51 332 75 590
04 107 28 191 52 340 76 604
05 110 29 196 53 348 77 619
06 113 30 200 54 357 78 634
07 115 31 205 55 365 79 649
08 118 32 210 56 374 80 665
09 121 33 215 57 383 81 681
10 124 34 221 58 392 82 698
11 127 35 226 59 402 83 715
12 130 36 232 60 412 84 732
13 133 37 237 61 422 85 750
14 137 38 243 62 432 86 768
15 140 39 249 63 442 87 787
16 143 40 255 64 453 88 806
17 147 41 261 65 464 89 825
18 150 42 267 66 475 90 845
19 154 43 274 67 487 91 866
20 158 44 280 68 499 92 887
21 162 45 287 69 511 93 909
22 165 46 294 70 523 94 931
23 169 47 301 71 536 95 953
24 174 48 309 72 549 96 976
Code A B C D E F G H X Y Z
Multiplier 10010110210310410510610710-1 10-2 10-3
0603 E96 Marking Code Table
E96 3 Digit Marking - Examples: 14C=13K7Ω, 13C=13K3Ω, 68B=4K99Ω, 68X=49.9Ω
Thick Film Chip Resistors
Type CRG Series
Literature No. 1773204
Issued: 06-09
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com
Performance Characteristics
The evaluation of the performance characteristics is carried out with reference
to IECQ specifications QC 400 000 and QC 400 100.
Storage
Unopened reels should be stored within a temperature range of +5 °C to +25 °C, separated from any dust,
chemicals and solvent based materials. Non-adherence to this procedure could effect the solderability of
this product.
TEST REF Long Term Tests ±(3% + 0.1 ohm)
4.23 Climatic sequence
4.24 Damp heat, steady state
4.25.1 Endurance at 70 °C
4.25.3 Endurance at 125 °C
TEST REF Short Term Tests ±(1% + 0.05 ohm)
4.13 Overload
4.32 Adhesion
4.33 Bond strength of end face plating
4.19 Rapid change of temperature
4.18 Resistance to soldering heat
Mounting
The resistors are suitable for processing on automatic insertion equipment.
Marking
CRG0805, CRG1206, CRG2010, CRG2512
E24 series resistors are marked with a three digit code.
E96 series resistors are marked with a four digit code.
Zerohm components are marked '0'.
CRG0603
E24 5% series are marked with a three digit code.
E24 1% series are marked with a three digit code.
E96 series are marked with the international alphanumeric three character code (available on request).
EXCEPT 10, 11, 13, 15, 20 & 75 decades which are marked as the E24 series.
CRG0402 series unmarked.
How to Order
CRG 0603 J 1K0
Common Part
0402
0603
0805
1206
2512
Size
F - ±1%
J - ±5%
Tolerance Resistance Value
CRG - Thick Film
Chip Resistor
1 ohm
(1 ohm) 1R0
1K ohm
(1000 ohms) 1K
100K ohm
(100000 ohms) 100K
1M ohm
(1000000 ohms) 1M
Derating Curve
0 20 40 60 80 100 120 140
Ambient Temperature (°C)
100
80
60
40
20
0
Percent Rated Power
Thick Film Chip Resistors
Type CRG Series
Literature No. 1773204
Issued: 06-09
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com
