New Generation DPDT Surface Mount Signal Relay EE2 Compact and Light Weight 2 Form C Contact Arrangement Low Power Consumption Reduced Mounting Space: 15mm x 9.5mm High-breakdown Voltage of Coil to Contacts: 1500 VAC, 2500 V (2 x 10 s*) Capable of High-power Switching: 700 VAC, 4.2 A, 4 times in case of accident UL Recognised (E73266), CSA Certified (LR46266) EN60950 version available on request Tube or Taped Packaging Specifications 2 Form C Silver alloy with gold alloy overlay 30W 125 VA (resistive) 220Vdc 250 Vac 2A 2A 10 mVDC, 100 A 50 m typ. 140 mW (3 to 12 V), 200 mW (24 V) 100 mW 140 mW Approximately 2 ms without diode Approximately 1 ms without diode 1000 M at 500 VDC 1000 VAC (for one minute) 1500 V surge (10 x 160 s*1) 1500 VAC (for one minute) 2500V surge (2 x 10 s*2) 735 m/s2 (75G) (misoperating) 980 m/s2 (100G) (destructive failure) 10-55Hz, double amplitude 3 mm (20G) (misoperating) 10-55Hz, double amplitude 5 mm (30G) (destructive failure) -40C to+ 85C 18 degrees at nominal coil voltage (140 mW) 1 x 107 operations 50 VDC, 0.1A (resistive) 1 x 106 operations at 85C 10 VDC, 10 mA (resistive) 1 x 106 operations at 85C Approximately 1.9 g Contact form Contact material Maximum Maximum Maximum Maximum Contact rating switching power switching voltage switching current carr ying current Minimum contact ratings Initial contact resistance Nonlatch type Single coil latch type Double coil latch type Nominal operating power Operate time (excluding bounce) Release time (excluding bounce) Insulation resistance Between open contacts Between adjacent contacts Breakdown voltage Between coil to contacts Shock resistance Vibration resistance Ambient temperature Coil temperature rise Nonload Running specifications Load Weight * rise time: 10 s, fall time: 160 s *2 rise time: 2 s, fall time: 10 s 1 Dimensions mm(inch) Schematics Bottom View EE2-..NU EE2-..NUX 1.35(0.05) 5.08 (0.2) 10.35(0.41)MAX 1.0(0.04) 10.0(0.39) MAX 5.08 (0.2) note 2-2.540(0.1) note 2-2.54(0.1) 7.5(0.3) +- + 10 9 8 Nonlatch type (not energized position) 5.08 (0.2) 3 4 5 1 note 2-2.54 3 4 5 6 10 9 8 7 _+ +12 10 9 8 Single coil latch type (reset position) 7.5(0.3)MAX 1.5(0.06) 5.08 (0.2) _ 12 15(0.59)MAX 10.0(0.39) MAX 1.0(0.04) 5.08 (0.2) 1 5 10.5(0.41)MAX 7.5(0.3)MAX 4 9.0(0.35) EE2-..NUN 15(0.59)MAX 3 R S 5.08 (0.2) note 2-2.54 9.5(0.37) EE2-..NUH 1 _+ _ 5.08 (0.2) 7.5(0.3)MAX 15(0.59)MAX + 7.5(0.3)MAX 15(0.59)MAX 5.08 (0.2) 7.5(0.3) note: This pair of pins at the right end applies to double coil latch type only. PRICE INFORMATION AND ORDERING IMO the EMECH specialist 12 Double coil latch type (reset position) EE2 Part Number System Pad layout (bottom view) mm(inch) EE2-3SNU-L 10.0(0.04) 10.0(0.04) Packaging code Nil: Tube L: Embossed carrying tape (L type) R: Embossed carrying tape (R type) Nil: Standard type NU: UL recognised CSA certified type NUH: Minimum footprint type (UL recognised CSA certified type) NUX: High solder joint reliability type (UL recognised CSA certified type) NUN: High solder joint reliability with Minimum footprint type (UL recognised CSA certified type) Latch type Nil: Nonlatch type (standard) S: Single coil latch type T: Double coil latch type Nominal coil voltage (see part numbers) B B A A 2.54 (0.1) 12.7 (0.5) Nonlatch type and Single coil latch type Double coil latch type TYPE EE2-..NU EE2-..NUX EE2-..NUH EE2-..NUN 7.29 7.02 6.29 6.29 A (0.29) (0.28) (0.25) (0.25) B 2.73 (0.11) 2.73 (0.11) 2.0 (0.08) 2.0 (0.08) Part Number Nonlatch type at 25C Part Number (Standard) Nominal Coil Voltage VDC Coil Resistance 10% Must Operate Voltage VDC Must Release Voltage VDC EE2-3 EE2-4.5 EE2-5 EE2-6 EE2-9 EE2-12 EE2-24 3 4.5 5 6 9 12 24 64.3 145 178 257 579 1028 2880 2.25 3.38 3.75 4.5 6.75 9.0 18.0 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Single Coil Latch type at 25C Part Number (Standard) Nominal Coil Voltage VDC Coil Resistance 10% Must Operate Voltage VDC Must Release Voltage VDC EE2-3S EE2-4.5S EE2-5S EE2-6S EE2-9S EE2-12S EE2-24S 3 4.5 5 6 9 12 24 90 202.5 250 360 810 1440 5760 2.25 3.38 3.75 4.5 6.75 9.0 18.0 2.25 3.38 3.75 4.5 6.75 9 18 Double Coil Latch type at 25C Part Number (Standard) Nominal Coil Voltage VDC EE2-3T 3 EE2-4.5T 4.5 EE2-5T 5 EE2-6T 6 EE2-9T 9 EE2-12T 12 EE2-24T 24 Coil Resistance 10% S R S R S R S R S R S R S R Must Operate Voltage VDC Must Release Voltage VDC 2.25 3.38 3.75 4.5 6.75 9.0 18.0 - 2.25 3.38 3.75 4.5 6.75 9.0 18.0 64.3 64.3 145 145 178 178 257 257 579 579 1028 1028 4114 4114 Note S: Set Coil (pin No. 1 and 12) R: Reset Coil (pin No. 6 and 7) PRICE INFORMATION AND ORDERING IMO the EMECH specialist