Features Regulated Converters 2:1 Wide Input Voltage Range 8 Watts Regulated Output Power 1.6kVDC Isolation ULCertified Low Profile, 10.2 mm Height Over Current Protection Five-Sided Shield Standard DIP24 and SMD-Pinning Efficiency to 87 % Description The RP08-A series DC/DC converterc are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal shock and vibration tolerance. POWERLINE DC/DC-Converter with 3 year Warranty 8 Watt DIP24/SMD Single & Dual Output Selection Guide Input Range VDC Output Voltage VDC Output Current mA Input(4) Current mA RP08-123.3SA** 9-18 3.3 2000 724 80 3300F RP08-1205SA** 9-18 5 1500 801 83 1600F RP08-1212SA** 9-18 12 666 833 88 350F RP08-1215SA** 9-18 15 533 843 87 240F RP08-243.3SA** 18-36 3.3 2000 362 80 3300F RP08-2405SA** 18-36 5 1500 396 83 1600F RP08-2412SA** 18-36 12 666 416 86 350F RP08-2415SA** 18-36 15 533 416 85 240F RP08-483.3SA** 36-75 3.3 2000 181 80 3300F RP08-4805SA** 36-75 5 1500 198 83 1600F RP08-4812SA** 36-75 12 666 208 86 350F RP08-4815SA** 36-75 15 533 208 86 240F RP08-1205DA** 9-18 5 800 843 83 1000F RP08-1212DA** 9-18 12 333 833 87 160F RP08-1215DA** 9-18 15 267 834 85 100F RP08-2405DA** 18-36 5 800 427 82 1000F RP08-2412DA** 18-36 12 333 422 86 160F RP08-2415DA** 18-36 15 267 411 85 100F RP08-4805DA** 36-75 5 800 211 85 1000F RP08-4812DA** 36-75 12 333 206 87 160F RP08-4815DA** 36-75 15 267 206 87 100F Part Number DIP24 (SMD) Efficiency(5) Capacitive(6) Load max. % RoHS 2002/95/EC 6/6 UL-60950-1 Certified E196683 RP08 ** add Suffix SMD for SMD package Please Read Application Notes www.recom-international.com REV:1/2010 P-1 RP08-S_DA Series POWERLINE DC/DC-Converter Derating Graph (Ambient Temperature) RP08-4805SA 125 100 Output Power (%) 75 50 Natural Convection 25 0 -40 -25 -10 0 50 60 70 80 90 100 Ambient Temperature Range (C) 65 Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical support service at info@recom-development.at Specifications (typical at nominal input and 25C unless otherwise noted) RP08 Input Voltage Range (see Note 3) 12V nominal input 9-18VDC 24V nominal input 18-36VDC 48V nominal input 36-75VDC Input Filter Input Surge Voltage (100 ms max.) Pi Type 12V Input 36VDC 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load) 20mAp-p Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see Note 7) Remote OFF input current 600ms typ. DC-DC ON DC-DC OFF Nominal input Output Power 8W max. Output Voltage Accuracy (full Load and nominal Vin) 2% Minimum Load (see Note 1) 10% of full load Line Regulation (low line, high line at full load) Load Regulation (25% to 100% full load) Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA 0.2% Single Dual Cross Regulation (asymmetrical 25%<>100% load) 0.5% 1% 5% Ripple and Noise (20MHz bandwith) 50mVp-p Temperature Coefficient 0.02%/C max. Transient Response (25% load step change) 200s continued on next page P-2 REV: 1/2010 www.recom-electronic.com RP08-S_DA Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25C unless otherwise noted) Over Load Protection (% of full load at nominal Vin) 150% typ Undervoltage Lockout none Short Circuit Protection Continuous, automatic recovery Efficiency Isolation Voltage (rated for one minute) see Selection Guide" table In to out I/O to case I/O to case 1600VDC DIP type 1600VDC SMD type 1000VDC Isolation Resistance 1 G min. Isolation Capacitance 300pF max. Operating Frequency 100kHz min. Approved to Safety Standards UL 1950, EN60950 Operating Temperature Range -40C to +85C(with derating) Maximum Case Temperature +100C Storage Temperature Range -55C to +125C Thermal Impedance Natural convection Thermal Shock 20C/Watt MIL-STD-810D Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Weight DIP SMD Packing Quantity Refer to App Notes for tube dimensions Dimensions DIP SMD Level A Level A Perf. Criteria B Perf. Criteria B Perf. Criteria B Perf. Criteria B Perf. Criteria B 16g 18g 7 pcs per Tube 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 10.9mm 3165 x 103 hours MTBF (see Note 2) Notes: 1. The RP08 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). 3. Start up voltage : 10VDC 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. The ON/OFF control pin voltage is referenced to negative input. 8. Vin=12V, fit a 4.7F 1210 MLCC capacitor across the input pins to meet EN55022 Class A. 24V and 48V Types meet Class A without external components See application notes for Class B Filter suggestion. www.recom-international.com REV:1/2010 P-3 RP08 Conducted Emissions (see Note 8) Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity RP08-S_DA Series POWERLINE DC/DC-Converter Package Style and Pinning (mm) DIP24 Package Style 3rd angle projection 31.80 20.30 10.20 3.8 2 5.10 20.30 2.54 15.20 Pin Connections Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin NC = No Connection 0.25 x 0.50 Rectangular Pin 9 11 16 14 1 2 3 Bottom View RP08 23 22 Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin Pin Pitch Tolerance 0.35 mm SMD Package Style 32.00 20.30 31.40 SMD Package Style 11.20 2.54 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 10.90 3.81 21.30 6.35 25.40 Pin area 0.1 x 0.50 2.54 0.50 Pin Connections 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 11 x 2.54 P-4 16 15 14 13 Top View 1 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin Others NC NC = No Connection Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC Pin Pitch Tolerance 0.35 mm 27.94 REV: 1/2010 www.recom-electronic.com