9-6
www.adlinktech.com
1
Fanless
Embedded
Computers
12
2
3
4
5
6
Real-time
Distributed
I/O
7
8
Remote I/O
9
10
11
cPCI &
Industrial
Computers
13
NuDAM
Programmable I/O
■8255 programmable peripheral interface
mode 0 emulation
■Channel: 24
■Input Signal
•TTL level
■InternalPull-UpResistor:10kΩ
■Maximum Current: 0.5 mA
■Output Signal
•TTL level
Digital Input
■Channels: 4
■TTL level
Power
■Requirement: unregulated +10 V to +30 VDC
■Power Consumption:1.488 W typical
Connector
■50-pin female SCSI II
Relay Output
■Channels: 5 independent relay outputs
and 3 common source replay outputs
■Output type: 8 form A
■Contact rating:
•AC 3 A / 250 V
•DC 3 A / 30 V
■ON/OFF time interval: 6 ms/3 ms
•Operate time: approx. 6 ms
•Release time: approx. 3 ms
■Insulationresistance:1000MΩminimum
(at 500 VDC)
■Expected Life: 2 x 105
(3 A 250 VAC, 3 A 30 VDC at 20 cpm)
Power
■Power Requirement: +10 V to +30 VDC
Unregulated with against power reversal
■Power Consumption: 1.392 W typical
Counter Inputs
■Channels: Two independent 32-bit counter
■Input Frequency: 20 KHz max.
■Input Mode: isolated or non-isolated
■Isolation Voltage: 5000 VRMS
■Isolation Input Level
•Logical level 0: +1 V max
•Logical level 1: 3.5 V to 30 V
■CurrentLimitResistor:1.2kΩ
■Non-isolated Input Level programmable
threshold
•Logical l level 0: 0 V to +5 V
(default = 0.8 V)
•Logicallevel1:0Vto+5V
(default = 2.4 V)
■Input Pulse Width: > 5 μs
■Max Count: 4,294,967,295 (32-bit)
■Programmable Digital Noise Filter: 4 μs
to 1.02 ms
■Alarm: alarm comparator on each counter
Frequency Measurement
■Range: 1 Hz to 20 KHz
■Programmable built-in gate time: 1.0 / 0.1 s
Digital Output
■Channels: 2
■Open collector to 30 V, 30 mA max. load
Power
■Requirement: unregulated +10 V to +30 VDC
■Power Consumption: 2.016 W
Relay Output
■Channels: 8 independent relay outputs
■Output Type: 8 form A
■Contact Rating
•DC 1 A / 30 V
•ON/OFF interval time: 3 ms (at 20°C)
■Internal Insulation
■Resistance:1000MΩ@500VDC
■Expected Life: 2 x 105
(1 A 30 VDC resistive at 20 cpm)
Power
■ Requirement: unregulated +10 V to +30 VDC
■ Power Consumption: 1.416 W typical
Relay Output
■ Channels: 4 relay outputs
■ Output Type: 2 form C and 2 form A
■ Contact Rating:
•DC 2A / 30 V
■ ON/OFF Interval Time: 3 ms
■ Internal Insulation Resistance:
1000MΩ@500VDC
■ Expected Life: 2 x105
(1 A 30 VDC resistive at 20 cpm)
■ Programmable output polarity
■ Programmable output power on/safety state
Digital Input
■ Channels: 4
■ Common External Voltage: +24 V
■ CurrentLimitResistor:2.2kΩ
■ Isolation Voltage: 5000 VRMS
■ Input Type: dry contact
■ Programmable input polarity
Power
■ Requirement: unregulated +10 V to +30 VDC
■ Power Consumption: 0.84 W typical
28-CH PPI Module
ND-6058
8-CH Relay Output Module
ND-6063
8-CH AC Relay Output Module
ND-6067
Relay Output & Digital Input Module
ND-6060
2-CH Counter/Frequency Input Module
ND-6080