ATC 180 R Series
NPO Porcelain
Ultra-Low ESR
Multilayer Capacitors
• Case R Size • Capacitance Range
(.070" x .105") 0.5 pF to 100 pF
• High Q • High Self-Resonance
• ATC's Lowest ESR • 500 WVDC
• ATC's Lowest Noise • High Reliability
ATC, the industry leader, is announcing new improved ESR/ESL
performance for the 180 R Series RF/Microwave Capacitors.This is
ATC's lowest ESR multilayer capacitor. The high Q, high self-
resonance characteristic supports many RF/Microwave applications.
Self-encapsulating porcelain construction provides a rugged,
hermetic package without the need or liability of external
encapsulants.
Typical functional applications: Bypass, Coupling, Tuning, Feedback,
Impedance Matching and D.C.Blocking.
Typical circuit applications: RF Power Amplifiers,Filters, Oscillators,
Timing Circuits and Delay Lines.
ENVIRONMENTAL TESTS
ATC 180 R Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-C-55681 and
MIL-C-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
LOW V OL T AGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts D.C.applied
while subjected to an environment of 85°C with 85% relative
humidity for 240 hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
200% WVDC applied.
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q): greater than 10,000 at 1 MHz.
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
0 ±30 PPM/°C (-55°C to +125°C).
0 ±60 PPM/°C (+125°C to +175°C).
INSULATION RESISTANCE (IR):
0.5 pF to 100 pF:
106Megohms min.@ +25°C at rated WVDC.
105Megohms min.@ +125°C at rated WVDC.
104Megohms min.above +125°C.
WORKING V OL T A GE (WVDC): 500 WVDC .
DIELECTRIC WITHST ANDING V OL T AGE (DWV):
Case R:250% of rated WVDC for 5 secs.
AGING EFFECTS: None
PIEZOELECTRIC EFFECTS: None
(No capacitance variation with voltage or pressure).
CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever
is greater.
OPERA TING TEMPERA TURE RANGE:
From -55°C to +175°C (No derating of working voltage).
TERMINATION STYLES:
Termination code W (nickel barrier, solder plated).
See Mechanical Configuration, page 2.
TERMINAL STRENGTH:Terminations for chips withstand a pull
of 5 lbs.min., 15 lbs.typical, for 5 seconds in direction perpendicular
to the termination surface of the capacitor.