ATC 180 R Series NPO Porcelain Ultra-Low ESR Multilayer Capacitors * Case R Size (.070" x .105") * Capacitance Range 0.5 pF to 100 pF * High Q * High Self-Resonance * ATC's Lowest ESR * 500 WVDC * ATC's Lowest Noise * High Reliability ELECTRICAL AND MECHANICAL SPECIFICATIONS QUALITY FACTOR (Q): greater than 10,000 at 1 MHz. ATC, the industry leader, is announcing new improved ESR/ESL performance for the 180 R Series RF/Microwave Capacitors. This is ATC's lowest ESR multilayer capacitor. The high Q, high selfresonance characteristic supports many RF/Microwave applications. Self-encapsulating porcelain construction provides a rugged, hermetic package without the need or liability of external encapsulants. Typical functional applications: Bypass, Coupling, Tuning, Feedback, Impedance Matching and D.C. Blocking. Typical circuit applications: RF Power Amplifiers,Filters, Oscillators, Timing Circuits and Delay Lines. ENVIRONMENTAL TESTS ATC 180 R Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-C-55681 and MIL-C-123. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): 0 30 PPM/C (-55C to +125C). 0 60 PPM/C (+125C to +175C). INSULATION RESISTANCE (IR): 0.5 pF to 100 pF: 106 Megohms min. @ +25C at rated WVDC. 105 Megohms min. @ +125C at rated WVDC. 104 Megohms min. above +125C. WORKING VOLTAGE (WVDC): 500 WVDC. DIELECTRIC WITHSTANDING VOLTAGE (DWV): Case R: 250% of rated WVDC for 5 secs. AGING EFFECTS: None PIEZOELECTRIC EFFECTS: None (No capacitance variation with voltage or pressure). CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater. THERMAL SHOCK: MIL-STD-202, Method 107, Condition A. OPERATING TEMPERATURE RANGE: From -55C to +175C (No derating of working voltage). MOISTURE RESISTANCE: MIL-STD-202, Method 106. TERMINATION STYLES: LOW VOLTAGE HUMIDITY: Termination code W (nickel barrier, solder plated). See Mechanical Configuration, page 2. MIL-STD-202, Method 103, Condition A, with 1.5 Volts D.C. applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. LIFE TEST: TERMINAL STRENGTH: Terminations for chips withstand a pull of 5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. MIL-STD-202, Method 108, for 2000 hours, at 125C. 200% WVDC applied. one norden lane, huntington station, n.y. 11746-2142 usa ATC # 001-810 Rev. E phone: 631-622-4700 * fax: 631-622-4748 * e-mail: sales@atceramics.com 12/00; 1 of 8 http://www.atceramics.com ATC 180 R Capacitance Values CAP. CODE CAP. (pF) 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.4 2.7 TOL. RATED WVDC C, D CAP. CODE CAP. (pF) 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 500 TOL. RATED WVDC CAP. CODE CAP. (pF) 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 101 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 C, D 500 J, K, M TOL. RATED WVDC J, K, M 500 VRMS = 0.707 x WVDC Mechanical Configuration BODY DIMENSIONS Inches (mm) OUTLINES ATC ATC SERIES TERM. & CASE CODE SIZE CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) WIDTH (W) Y 180R W .070 .015 .105 .010 (1.78 0.38) (2.67 0.25) T R Solder Plate L LEAD AND TERMINATION DIMENSIONS AND MATERIALS THICKNESS (T) OVERLAP (Y) .090 (2.29) max. .010 +.010 - .005 (0.25 +0.25 - 0.13) W MATERIALS SOLDER PLATE Nickel barrier, solder plated. Rugged, high performance termination for lower cost, high volume applications. All 180 R Capacitors are available laser marked with ATC's identification, capacitance code and tolerance. ATC PART NUMBER CODE ATC180 R 10 0 Series Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. CAPACITANCE TOLERANCE Code C D J K M Tol. 0.25 pF 0.5 pF 5% 10% 20% Packaging T - Tape and Reel (7" Reel) B - Bulk Packaging (packed in plastic bags) C - ATC Cap-Pac(R) I - Special Packaging. Consult Factory Laser Marking WVDC Termination Code The above part number refers to a 180 R Series (case size R) 10 pF capacitor, J tolerance (5%), 500 WVDC, with W termination (solder plate), laser marking and bulk packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. 2 J W 500 X B For additional information and catalogs contact your ATC representative or call direct at (631) 622-4700. Consult factory for additional performance data. American Technical Ceramics * One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 * fax: 631-622-4748 * e-mail: sales @ atceramics.com * http://www.atceramics.com 2 of 8 ATC 180 R Performance Data ESR VS CAPACITANCE ATC SERIES 180, CASE R 0.1 1000 MHz ESR (Ohms) 1 500 MHz 150 MHz (Typical) 0.01 1 10 100 CAPACITANCE (1.0 pF to 22 pF) Q VS CAPACITANCE ATC SERIES 180, CASE R 100000 10000 Q 150 MHz 1000 500 MHz 1000 MHz (Typical) 100 1 10 100 CAPACITANCE (1.0 pF to 22 pF) 3 of 8 American Technical Ceramics * One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 * fax: 631-622-4748 * e-mail: sales @ atceramics.com * http://www.atceramics.com 3 ATC 180 R Performance Data ESR VS CAPACITANCE ATC SERIES 180, CASE R 0.1 1000 MHz ESR (Ohms) 500 MHz 150 MHz (Typical) 0.01 10 30 100 CAPACITANCE (24 pF to 100 pF) Q VS CAPACITANCE ATC SERIES 180, CASE R 10000 150 MHz Q 1000 500 MHz 1000 MHz 100 (Typical) 10 10 4 30 CAPACITANCE (24 pF to 100 pF) American Technical Ceramics * One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 * fax: 631-622-4748 * e-mail: sales @ atceramics.com * http://www.atceramics.com 100 4 of 8 ATC 180 R Performance Data SERIES RESONANCE VS CAPACITANCE SERIES 180, CASE R FREQUENCY (GHz) 100 10 1 (Typical) 0.1 0.1 1 10 CAPACITANCE 100 (pF) CURRENT RATING VS CAPACITANCE ATC SERIES 180, CASE R The current rating is based on a 85oC mounting surface with a thermal resistance of 15oC/W. A power dissipation of 4 W will result in a case temperature of 125oC. 10 RMS CURRENT (Amps) 100 1000 MHz 150 MHz 500 MHz 1 Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 0.1 0.1 1 10 CAPACITANCE 5 of 8 100 (pF) American Technical Ceramics * One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 * fax: 631-622-4748 * e-mail: sales @ atceramics.com * http://www.atceramics.com 5 ATC 180 R Performance Data CAPACITANCE CHANGE VS TEMPERATURE ATC SERIES 180, CASE R 3 TC= 0 30 PPM/C (-55C to +125C) TC= 0 60 PPM/C (+125C to +175C) % CHANGE IN CAPACITANCE 2 1 0 -1 -2 -3 -55 -35 -15 5 25 45 65 85 105 125 145 165 TEMPERATURE (Degrees C) 6 American Technical Ceramics * One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 * fax: 631-622-4748 * e-mail: sales @ atceramics.com * http://www.atceramics.com 6 of 8 Notes 7 of 8 American Technical Ceramics * One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 * fax: 631-622-4748 * e-mail: sales @ atceramics.com * http://www.atceramics.com 7 one norden lane, huntington station, n.y. 11746-2142 usa phone: 631-622-4700 * fax: 631-622-4748 * e-mail: sales@atceramics.com http://www.atceramics.com ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice. (c) 1996 American Technical Ceramics Corp. ATC # 001-810 Rev. E 12/00; 8 of 8