2SK3857MFV
2007-11-01
1
TOSHIBA Field Effect Transistor Silicon N Channel Junction Type
2SK3857MFV
For ECM
Application for Ultra-compact ECM
Absolute Maximum Ratings (Ta=25°C)
Characteristic Symbol Rating Unit
Gate-Drain voltage VGDO -20 V
Gate Current IG 10 mA
Drain power dissipation (Ta = 25°C) PD (Note 1) 150 mW
Junction Temperature Tj 125 °C
Storage temperature range Tstg 55~125 °C
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliabilit y upon reviewing the T oshiba
Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual
reliability data (i.e. reliability test report and estimated failure rate,
etc).
Note 1: Mounted on FR4 board
IDSS CLASSIFICATION
A-Rank 140~240µA
B-Rank 210~350µA
Marking Equivalent Circuit
Unit: mm
JEDEC -
JEITA -
TOSHIBA 2-1L1C
Weight: 1.5mg (typ.)
VESM 1.Drain
2.Source
3.Gate
D
G
S
IDSS Classification Symbol
A
:
A
- Rank
B :B - Rank
Type Name
9
1.0.05
0.32±0.05
1
2
3
0.40.4 0.22±0.05
0.0.05
0.0.05
1.2±0.05
0.0.05
0.13±0.05
0.5mm
0.45mm
0.45mm
0.4mm
2SK3857MFV
2007-11-01
2
Electrical Characteristics (Ta=25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
Drain Current IDSS V
DS = 2 V, VGS = 0 140 350 µA
Drain Current ID V
DD = 2 V, RL= 2.2kΩ,Cg = 5pF 370 µA
Gate-Source Cut-off Voltage VGS(OFF) V
DS = 2 V, ID = 1μA -0.1 -1.0 V
Forward transfer admittance |Yfs| VDS = 2 V,VGS = 0V 0.9 1.3 mS
Gate-Drain Voltage V(BR)GDO IG=-10μA -20 V
Input capacitance Ciss V
DS = 2 V, VGS = 0, f = 1 MHz 3.5 pF
Voltage Gain Gv VDD = 2V, RL= 2.2kΩ,Cg = 5pF, f = 1kHz,vin=100mV -3.0 -0.5 dB
Delta Voltage Gain DGv(f) VDD = 2V, RL= 2.2kΩ,Cg = 5pF,f = 1kHz to 100Hz,vin=100mV 0 -1 dB
Delta Voltage Gain DGv(V) VDD = 2V to 1.5V, RL= 2.2kΩ,Cg = 5pF,f = 1kHz, vin=100mV -0.8 -2 dB
Noise Voltage VN VDD = 2V, RL= 1kΩ,Cg = 10pF,Gv=80dB, A-Curve Filter 25 55 mV
Total Harmonic Distortion THD VDD = 2V, RL= 2.2kΩ,Cg = 5pF, f = 1kHz, vin=50mV 0.7 %
Time Output Stability tos VDD = 2V, RL= 2.2kΩ,Cg = 5pF 100 200 ms
Time Output Stability Test Method
a) TEST CIRCUIT b) TEST SIGNAL
VDD=2.0V
5pF
2.2kΩ
Vout
tos
90%
VDD-ID*RL
50%
2V
0V
VDD
0V
Vout
2SK3857MFV
2007-11-01
3
IDSS=150μA
IDSS=330μA
Ta=85
Ta=25
Ta=-40
Gate - Source voltage VGS (V)
ID – VGS
Drain Current ID (µA)
Drain Current IDSS (µA)
|Yfs| – IDSS
Forward transfer admittance
|Y
fs| (mS)
0
3
1
2
400 500
Gate-Source Cut-off Voltage
VGS(OFF) (V )
Drain Current IDSS (µA)
VGS(OFF) – IDSS
Gate - Source voltage VGS (V)
ID – VGS
Drain Current ID (µA)
0
600
-1.0 -0.8 -0.6 -0.4 -0.2
300
100
200
0
400
500
VDS=2V
Common Source
Ta = 25 °C
0
600
-1.0 -0.8 -0.6 -0.4 -0.2
300
100
200
0
400
500
VDS=2V
Common Source
100 200 300 600
|Yfs|:VDS=2V
VGS=0V
IDSS: VDS=2V
VGS=0V
Common Source
Ta = 25 °C
400 500 0
0
-100
-200
-300
-400
100 200 300 600 400 500
VGS(OFF):VDS=2V
ID = 1μA
IDSS:VDS=2V
VGS=0V
Common Source
Ta = 25 °C
-500
Drain - Source voltage VDS (V)
ID – VDS
Drain Current ID (µA)
0
600
0
300
100
200
2.0
400
500
1.0
Common Source
Ta = 25 °C
IDSS=170μA
VGS = 0 V
– 0.05 V
+ 0.1 V
+ 0.05 V
– 0.1 V
Drain - Source voltage VDS (V)
ID – VDS
Drain Current ID (µA)
0
600
0
300
100
200
2.0
400
500
1.0
Common Source
Ta = 25 °C IDSS=330μA
VGS = 0 V
– 0.05 V
+ 0.1 V
+ 0.05 V
– 0.1 V
2SK3857MFV
2007-11-01
4
Drain Current IDSS (µA)
VN – IDSS
Noise Voltage VN (mV)
Drain Current IDSS (µA)
DGv(V)– IDSS
Delta Voltage Gain DGv(V) (dB)
Voltage Gain Gv (dB)
Drain Current IDSS (µA)
Gv– IDSS
Drain - Source voltage VDS (V)
Ciss – VDS
Input capacitance Ciss (pF)
11 10
10
5
5
VGS=0V
f=1kHz
Common Source
Ta = 25°C
0
– 2
1
0
–3
100 200 300 600 400 500
Gv:VDD=2V
Cg=5pF
RL= 2.2kΩ,
f=1kHz
vin=100mV
IDSS: VDS=2V
VGS=0V
Common Source
Ta = 25°C 0
-1.0
-1.5
-2.5
0
-0.5
-2.0
-3.0
100 200 300 600 400 500
DGv:VDD=2V to 1.5V
Cg=5pF
RL= 2.2kΩ,
f=1kHz
vin=100mV
IDSS: VDS=2V
VGS=0V
Common Source
Ta = 25°C
Electret Capacitance Cg (pF)
Gv – Cg
Voltage Gain Gv (dB)
0 2 4 6 8 10
-20
10
-5
-15
-10
0
5
VDD=2V
Cg=5pF
RL= 2.2kΩ,
f=1kHz
vin=100mV
Common Source
Ta = 25°C
IDSS=350μA
IDSS=170μA
0
60
30
10
20
40
50
0 100 200 300 600 400 500
VN:VDD=2V
Cg=10pF
RL= 1kΩ
f=1kHz
80dB AMP
A-Curve Filter
IDSS: VDS=2V
VGS=0V
Drain Current IDSS (µA)
THD– IDSS
Total Harmonic Distortion
THD (%)
0
0.5
1.0
1.5
2.0
100 200 300 600 400 500
0
THD:VDD=2V
Cg=5pF
RL= 2.2kΩ
f=1kHz
vin=50mV
IDSS: VDS=2V
VGS=0V
Common Source
Ta = 25°C
–4
–1
Common Source
Ta = 25°C
3
2SK3857MFV
2007-11-01
5
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAM AGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICUL AR PURPOSE, ACCURACY OF INFORMATION, OR NONI NFRINGEMEN T.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulat ions.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.