Varicon(R) Series 8219 - 0.050" Staggered Dual Row FEATURES * For p.c. card-to-card applications * High contact density * Low withdrawal force contacts * Rugged, color coded end guides * Parallel or perpendicular p.c. board mounting * Mates with Series 8218 TECHNICAL SPECIFICATIONS Current Rating: 5 amperes, maximum Contact Resistance: 6 milliohms, maximum Contact Material and Plating: Phosphor Bronze Gold, 10 microinches minimum, over nickel, 50 to 100 microinches Insulator Material: Diallyl phthalate, glass-filled, flame resistant per MIL-M-14F, Type SDGF. Dielectric Withstanding Voltage: Sea Level: 1000 Volts rms 3.4" Hg: 500 Volts rms Guidance Hardware: Left hand guides: Metal, gold color Right hand guides: Metal, silver color Insertion/Withdrawal Force: 2 to 8 ounces per contact Insulation Resistance: 5,000 megohms, minimum ORDERING CODE 00 8219 042 722 001 Number of Contacts 018, 030, 036, 042, 054, 072 Contact Code (see below) Variation Code For Variation = 001 Code "X" Contact Type Dim. No. 722 721 736 737 753 771 Wire hole tail P. C. solder tail P. C. solder tail P. C. solder tail P. C. solder tail P. C. solder tail .187 .250 .281 .562 .125 .484 For Variation = 002 Code Contact Type No. 000 722 P. C. solder tails formed Wire hole tail unformed For Variation = 005 Code "Y" No. Contact Type Dim. 722 721 736 737 753 771 Without Keying Wire hole tail P. C. solder tail P. C. solder tail P. C. solder tail P. C. solder tail P. C. solder tail NOTE: Connector is supplied with mounting screws or eyelets, as applicable (see drawings). 001 = Receptacle 002 = Plug, parallel board mounting 005 = Plug, perpendicular board mounting POLARIZING SYSTEM 1 5 13 7 4 2 Contact Factory for Special Variations. 9 3 17 11 8 6 15 12 10 .157 .219 .250 .531 .093 .453 16 14 18 When Keying is ordered with part number, the Key is installed at the factory. 34 Varicon(R) Series 8219 - 0.050" Staggered Dual Row DIMENSIONS: Number of Contacts 18 30 36 42 54 72 millimeters (inches) A B C 17 29 35 41 53 71 .850 (0.033) 1.450 (0.057) 1.750 (0.069) 2.050 (0.080) 2.650 (0.104) 3.550 (0.140) 1.150 (0.045) 1.750 (0.069) 2.050 (0.080) 2.350 (0.093) 2.950 (0.116) 3.850 (0.152) Ref. D 1.290 (0.051) 1.890 (0.075) 2.190 (0.086) 2.490 (0.098) 3.090 (0.122) 3.990 (0.157) E F G Ref. K 1.400 (0.055) 2.000 (0.079) 2.300 (0.091) 2.600 (0.102) 3.200 (0.126) 4.100 (0.161) 1.540 (0.061) 2.140 (0.084) 2.440 (0.096) 2.740 (0.108) 3.340 (0.131) 4.240 (0.167) .964 (0.038) 1.564 (0.061) 1.864 (0.073) 2.164 (0.085) 2.764 (0.109) 3.664 (0.144) 1.300 (0.051) 1.900 (0.075) 2.220 (0.087) 2.500 (0.098) 3.100 (0.122) 4.000 (0.157) RECEPTACLE 001 MATES WITH PLUGS 002 AND 005 MOUNTING LAYOUTS *When used in metal panel with Code Contact 722 cut out diam. Is .210". 35