https://www.phoenixcontact.com/us/products/1410666
07/08/2019Page1/6
Connector-SACC-M12MS-8CON-PG11-M-1410666
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Connector, 8-position, Plug straight M12, A-coded, Screw connection, knurl material: Zinc die-cast, nickel-plated,
cable gland Pg11, external cable diameter 8 mm ... 10 mm
Your advantages
Safe use in the field, thanks to a high degree of protection
Flexible: connectors for on-site assembly
Screw connection: proven connection technology for a large selection of different conductors
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356904650
Weight per Piece (excluding packing) 20.000 g
Custom tariff number 85366990
Country of origin Germany
Technical data
Dimensions
Diameter housing 20 mm
Length 65.5 mm
External cable diameter 8 mm ... 10 mm
Stripping length of the sheath 20 mm
Stripping length of the individual wire 5 mm
Ambient conditions
https://www.phoenixcontact.com/us/products/1410666
07/08/2019Page2/6
Connector-SACC-M12MS-8CON-PG11-M-1410666
Technical data
Ambient conditions
Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)
Degree of protection IP67
General
Note
NOTE: Observe the permissible bending radii when laying conductors,
since the degree of protection may be put in jeopardy if the bending forces
are too high. Alleviate mechanical loads upstream of the connector, e.g.by
using cable ties.
Rated current at 40°C 2 A
Rated voltage 30 V AC
30 V DC
Number of positions 8
Color handle area black
Insulation resistance ≥ 100 MΩ
Coding A - standard
Standards/regulations M12 connector IEC61076-2-101
Status display No
Overvoltage category II
Degree of pollution 3
Connection method Screw connection
Conductor cross section 0.25 mm² ... 0.5 mm² (without ferrule)
0.14 mm² ... 0.34 mm² (with ferrule)
0.25 mm² ... 0.5 mm² (solid)
Conductor cross section AWG 24 ... 20 (without ferrule)
26 ... 22 (with ferrule)
Insertion/withdrawal cycles ≥ 100
Torque 0.4 Nm (M12 knurl)
0.2 Nm (Screw terminal blocks)
1.5 Nm ... 2 Nm (Pressure screw with sleeve housing)
Tightening torque Screw plug insert with sleeve housing as far it will go
Assembly instructions The wires can be connected both with ferrules and without ferrules
Material
Flammability rating according to UL 94 HB
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Material of grip body PA
Material, knurls Zinc die-cast, nickel-plated
https://www.phoenixcontact.com/us/products/1410666
07/08/2019Page3/6
Connector-SACC-M12MS-8CON-PG11-M-1410666
Technical data
Material
Sealing material NBR
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
Flammability rating according to UL 94 HB
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Schematic diagram
Pin assignment M12 plug, 8-pos., A-coded, view
plug side
Dimensional drawing
M12x1
Ø20
65,5
18 19
Plug, M12 x 1, straight
Classifications
eCl@ss
eCl@ss 4.1 27250313
eCl@ss 5.1 27260700
eCl@ss 6.0 27279200
eCl@ss 7.0 27440104
eCl@ss 8.0 27440104
eCl@ss 9.0 27440102
ETIM
ETIM 4.0 EC002062
ETIM 5.0 EC002062
ETIM 6.0 EC002062
https://www.phoenixcontact.com/us/products/1410666
07/08/2019Page4/6
Connector-SACC-M12MS-8CON-PG11-M-1410666
Classifications
UNSPSC
UNSPSC 13.2 39121413
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approval details
EAC EAC-Zulassung
Accessories
Accessories
Cable end sleeve
Ferrule-A 0,25- 5-3202465
Ferrule, length: 5 mm, color: silver
Crimping tool
Crimping pliers-CRIMPFOX 6H-1212046
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14mm²...6mm², unlockable pressure lock, lateral entry
https://www.phoenixcontact.com/us/products/1410666
07/08/2019Page5/6
Connector-SACC-M12MS-8CON-PG11-M-1410666
Accessories
Protective cap
Sealing cap-PROT-M12 FS-PA-CHAIN-1430873
M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 plugs
Screwdriver tools
Adapter insert-TSD-M SAC-BIT ADAPTER-1212600
Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits
Tool-SACC BIT M12-D20-1208445
Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive
Screwdriver-SZS 0,4X2,0-1205202
Micro screwdriver, bladed, size: 0.4 x 2.0 x 60 mm, 2-component grip, with non-slip grip and twist cap
Stripping tool
https://www.phoenixcontact.com/us/products/1410666
07/08/2019Page6/6
Connector-SACC-M12MS-8CON-PG11-M-1410666
Accessories
Stripping tool-WIREFOX SAC-1212623
Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7
mm, any stripping length
Torque tool
Torque screwdriver-TSD 04 SAC-1208429
Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors
Torque screwdriver-TSD-M 1,2NM-1212224
Torque screw driver, accuracy as per ENISO6789 standard, adjustable from 0.3‑1.2Nm
Stripping tool-VS-CABLE-STRIP-VARIO-1657407
Stripping tool, for the multi-level stripping of shielded cables
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
