FAST RECOVERY DIODE V11 OUTLINE DRAWING Color of cathode band V11J (800V) V11L (1000V) V11M (1300V) V11N (1500V) Green Yellow Black Red Cathode band 5MAX (0.2) 0.8 (0.03) 29MIN. (1.14) Type 62MIN. (2.44) 29MIN. (1.14) Direction of polarity Unit in mm(inch) Color of glass seal : Blue * For high speed switching. * Diffused-junction. Glass passivated and encapsulated. 3.5 MAX (0.14) FEATURES Weight: 0.35 (g) ABSOLUTE MAXIMUM RATINGS V11J V11L V11M V11N Repetitive Peak Reverse Voltage VRRM V 800 1000 1300 1500 Non-Repetitive Peak Reverse Voltage VRSM V 1000 1300 1600 1800 Average Forward Current IF(AV) A Surge(Non-Repetitive) Forward Current IFSM A 30( Without PIV, 10ms conduction, Tj = 150C start ) 2 It 2 As 3.6( Time = 2 ~ 10ms, I = RMS value ) Tj C -65 ~ +150 Tstg C -65 ~ +200 Items 2 I t Limit Value Operating Junction Temperature Storage Temperature Notes Type Single-phase half sine wave 180 conduction 0.4 TL = 100C, Lead length = 10mm ( ) (1) Lead mounting : Lead temperature 300C max. to 3.2mm from body for 5sec. max.. (2) Mechanical strength : Bending 90x2 cycles or 180x1 cycle, Tensile 2kg, Twist 90x1 cycle. CHARACTERISTICS(TL=25C) Symbols Units Min. Typ. Max. Peak Reverse Current IRRM A - 2.0 10 Rated VRRM Peak Forward Voltage VFM V - - 2.5 IFM=0.4 Ap, Single-phase half sine wave 1 cycle trr s - - 0.4 IF=2mA, VR=-15V Rth(j-a) C/W - - Items Reverse Recovery Time Steady State Thermal Impedance Rth(j-l) 80 50 Test Conditions Lead length = 10 mm PDE-V11-0 V11 Max. average forward power dissipation (Resistive or inductive load) 100 PEAK FORWARD CURRENT (A) Single-phase half sine wave Conduction : 10ms 1 Cycle 10 TL=150C TL=25C 1 0.1 0 1 2 3 4 5 6 7 8 9 10 MAX. AVERAGE FORWARD POWER DISSIPATION (W) Forward characteristics 2.0 1.6 DC 1.2 Single-phase ( 50Hz ) 0.8 0.4 0 0 PEAK FORWARD VOLTAGE DROP (V) Single-phase half sine wave 180 conduction (50Hz) 160 140 120 Lead length L=10mm 20mm 25mm 100 80 60 L L 40 PC board (100x180x1.6t) Copper foil ( 5.5) 20 0 0 0.1 0.2 0.3 0.4 180 0.6 0.8 140 120 Lead length L=10mm 20mm 25mm 100 80 60 L L 40 Lead temp 20 0 0.5 Single-phase half sine wave 180 conduction (50Hz) 160 0 AVERAGE FORWARD CURRENT (A) PC board (100x180x1.6t) Copper foil ( 5.5) 0.1 0.2 0.3 0.4 0.5 AVERAGE FORWARD CURRENT (A) Surge forward current characteristic ( Non-repetitive ) Typ. reverse current vs. junction temperature 40 1000 Note : at VRRM Surge current peak value 10ms 1 cycle 30 REVERSE CURRENT (A) SURGE FORWARD CURRENT (A) 0.4 Max. allowable lead temperature (Resistive or inductive load) MAX. ALLOWABLE LEAD TEMPERATURE (C) MAX. ALLOWABLE AMBIENT TEMPERATURE (C) Max. allowable ambient temperature (Resistive or inductive load) 180 0.2 AVERAGE FORWARD CURRENT (A) 20 Without PIV With PIV 10 0 1 10 CYCLES 100 100 10 1 0 50 100 150 200 JUNCTION TEMPERATURE (C) PDE-V11-0 V11 Steady state thermal impedance Transient thermal impedance 200 TRANSIENT THERMAL IMPEDANCE (C/W) 120 Rth(j - a) 100 80 Rth(j - l) 60 Ambient temp. measured point Lead temp. Lead measured point length (0.5 thermocouple) 2 Copper foil ( 5.5) 40 15 20 STEADY STATE THERMAL IMPEDANCE (C/W) 140 20 PC board (100x180x1.6t) Lead length 0 0 10 20 Lead length = 10 mm Rth(j - l) 10 1 Note : PC. board mounted PC. board( 100 x 180 x 1.6t) Copper foil ( 5.5 ) 0.1 0.001 30 0.01 0.1 1 10 100 TIME (s) LEAD LENGTH (mm) Typ. reverse recovery time vs. junction temperature Reverse recovery time(trr) test circuit 2.0 50F - 15V 22s REVERSE RECOVERY TIME (s) Rth(j - a) 100 1.6 D.U.T 2mA 15V 0 600 t 0.1Irp Irp trr 1.2 0.8 0.4 0 0 40 80 120 160 200 JUNCTION TEMPERATURE (C) PDE-V11-0 HITACHI POWER SEMICONDUCTORS Notices 1.The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are adviced to contact Hitachi sales department for the latest version of this data sheets. 2.Please be sure to read "Precautions for Safe Use and Notices" in the individual brochure before use. 3.In cases where extremely high reliability is required(such as use in nuclear power control, aerospace and aviation, traffic equipment, life-support-related medical equipment, fuel control equipment and various kinds of safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement. Or consult Hitachi's sales department staff. 4.In no event shall Hitachi be liable for any damages that may result from an accident or any other cause during operation of the user's units according to this data sheets. Hitachi assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in this data sheets. 5.In no event shall Hitachi be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 6.No license is granted by this data sheets under any patents or other rights of any third party or Hitachi, Ltd. 7.This data sheets may not be reproduced or duplicated, in any form, in whole or in part , without the expressed written permission of Hitachi, Ltd. 8.The products (technologies) described in this data sheets are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety not are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. For inquiries relating to the products, please contact nearest overseas representatives which is located "Inquiry" portion on the top page of a home page. Hitachi power semiconductor home page address http://www.hitachi.co.jp/pse