HMC481MP86 / 481MP86E v03.0810 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Typical Applications Features The HMC481MP86 / HMC481MP86E is an ideal RF/ IF gain block & LO or PA driver for: P1dB Output Power: +20 dBm * Cellular / PCS / 3G Output IP3: +33 dBm * Fixed Wireless & WLAN Cascadable 50 Ohm I/Os * CATV, Cable Modem & DBS Single Supply: +6V to +12V * Microwave Radio& Test Equipment Included in the HMC-DK001 Designer's Kit Functional Diagram General Description Gain: 20 dB The HMC481MP86 & HMC481MP86E are SiGe Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT amplifiers covering DC to 5 GHz. This Micro-P packaged amplifier can be used as a cascadable 50 Ohm RF/IF gain stage as well as a LO or PA driver with up to +21 dBm output power. The HMC481MP86(E) offers 20 dB of gain with a +33 dBm output IP3 at 850 MHz while requiring only 74 mA from a single positive supply. The Darlington feedback pair used results in reduced sensitivity to normal process variations and excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifi cations, Vs= 8.0 V, Rbias= 39 Ohm, TA = +25 C Parameter Gain Gain Variation Over Temperature DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz Min. Typ. 18.5 15.5 12.5 10.5 9.0 20.0 17.0 14.0 12.0 10.5 Max. Units dB dB dB dB dB DC - 5 GHz 0.008 Input Return Loss DC - 1.0 GHz 1.0 - 5.0 GHz 13 17 dB dB Output Return Loss DC - 1.0 GHz 1.0 - 4.0 GHz 4.0 - 5.0 GHz 20 25 15 dB dB dB Reverse Isolation DC - 5 GHz 0.012 dB/ C 18 dB 20 18 17 15 12 dBm dBm dBm dBm dBm Output Power for 1 dB Compression (P1dB) 0.5 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz Output Third Order Intercept (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) 0.5 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz 33 31 29 26 dBm dBm dBm dBm Noise Figure DC - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 5.0 GHz 3.5 4.0 4.5 dB dB dB Supply Current (Icq) 16 15 14 12 9 74 85 mA Note: Data taken with broadband bias tee on device output. 8-1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC481MP86* PRODUCT PAGE QUICK LINKS Last Content Update: 02/23/2017 COMPARABLE PARTS DESIGN RESOURCES View a parametric search of comparable parts. * HMC481MP86 Material Declaration * PCN-PDN Information EVALUATION KITS * Quality And Reliability * HMC481MP86 Evaluation Board * Symbols and Footprints DOCUMENTATION DISCUSSIONS Data Sheet View all HMC481MP86 EngineerZone Discussions. * HMC481MP86: SiGe HBT Gain Block MMIC Amplifier, DC 5 GHz Data Sheet SAMPLE AND BUY TOOLS AND SIMULATIONS Visit the product page to see pricing options. * HMC481MP86 S-Parameters TECHNICAL SUPPORT REFERENCE MATERIALS Submit a technical question or find your regional support number. Quality Documentation * Package/Assembly Qualification Test Report: 3 Lead Plastic SOT89 Package (QTR: 10002 REV: 02) DOCUMENT FEEDBACK Submit feedback for this data sheet. * Package/Assembly Qualification Test Report: Plastic Encapsulated 4-LEAD MICRO-P (QTR: 05007 REV: 01) * Semiconductor Qualification Test Report: SiGe HBT-A (QTR: 2013-00227) This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified. HMC481MP86 / 481MP86E v03.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Gain vs. Temperature 24 15 20 5 S21 S11 S22 -5 16 12 -15 8 -25 4 -35 8 +25 C +85 C -40 C 0 0 1 2 3 4 5 6 7 8 0 1 FREQUENCY (GHz) 4 5 6 Output Return Loss vs. Temperature 0 0 -5 -5 +25 C +85 C -40 C -10 RETURN LOSS (dB) RETURN LOSS (dB) 3 FREQUENCY (GHz) Input Return Loss vs. Temperature -15 -20 -25 +25 C +85 C -40 C -10 -15 -20 -25 -30 -30 -35 0 1 2 3 4 5 6 0 1 FREQUENCY (GHz) 2 3 4 5 6 5 6 FREQUENCY (GHz) Reverse Isolation vs. Temperature Noise Figure vs. Temperature 10 0 -5 +25 C +85 C -40 C 8 NOISE FIGURE (dB) REVERSE ISOLATION (dB) 2 +25 C +85 C -40 C -10 -15 -20 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 25 GAIN (dB) RESPONSE (dB) Broadband Gain & Return Loss 6 4 2 -25 0 -30 0 1 2 3 4 FREQUENCY (GHz) 5 6 0 1 2 3 4 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8-2 HMC481MP86 / 481MP86E v03.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz P1dB vs. Temperature 20 20 16 16 Psat (dBm) P1dB (dBm) 24 12 +25 C +85 C -40 C 8 12 +25 C +85 C -40 C 8 4 4 0 0 0 1 2 3 4 5 0 1 2 FREQUENCY (GHz) Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 32 28 +25 C +85 C -40 C 20 16 0 1 2 4 5 Gain, Power & Output IP3 vs. Supply Voltage for Constant Id= 74 mA @ 850 MHz 36 24 3 FREQUENCY (GHz) Output IP3 vs. Temperature IP3 (dBm) 3 4 5 36 30 24 18 12 Gain P1dB Psat IP3 6 0 6 7 8 FREQUENCY (GHz) 9 10 11 12 Vs (V) Vcc vs. Icc Over Temperature for Fixed Vs= 8V, RBIAS= 39 Ohms Icc (mA) AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Psat vs. Temperature 24 84 82 80 78 76 74 72 70 68 66 64 62 60 58 4.8 +85 C +25 C -40 C 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 Vcc (V) 8-3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC481MP86 / 481MP86E v03.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Absolute Maximum Ratings +6 Vdc Collector Bias Current (Icc) 100 mA RF Input Power (RFIN)(Vcc = +5.15 Vdc) +10 dBm Junction Temperature 150 C Continuous Pdiss (T = 85 C) (derate 11.6 mW/C above 85 C) 0.753 W Thermal Resistance (junction to lead) 86.3 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 5. THE MICRO-P PACKAGE IS DIMENSIONALLY COMPATIBLE WITH THE "MICRO-X PACKAGE" 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Collector Bias Voltage (Vcc) Package Information Part Number Package Body Material Lead Finish MSL Rating HMC481MP86 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC481MP86E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [1] 481 [2] 481 [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8-4 HMC481MP86 / 481MP86E v03.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Pin Descriptions AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Pin Number Function Description Interface Schematic 1 RFIN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 RFOUT RF output and DC Bias (Vcc) for the output stage. 2, 4 GND These pins must be connected to RF/DC ground. Application Circuit Recommended Bias Resistor Values for Icc= 74 mA, Rbias= (Vs - Vcc) / Icc Supply Voltage (Vs) 6V 8V 10V 12V RBIAS VALUE 11 39 62 91 RBIAS POWER RATING 1/8 W 1/4 W 1/2 W 1W Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Component Values for Key Application Frequencies Frequency (MHz) Component 8-5 50 900 1900 2200 2400 3500 5000 L1 270 nH 56 nH 18 nH 18 nH 15 nH 8.2 nH 6.8 nH C1, C2 0.01 F 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC481MP86 / 481MP86E v03.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Evaluation PCB List of Materials for Evaluation PCB 107490 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 - J4 DC Pin C1, C2 Capacitor, 0402 Pkg. C3 100 pF Capacitor, 0402 Pkg. C4 1000 pF Capacitor, 0603 Pkg. C5 2.2 F Capacitor, Tantalum R1 Resistor, 1210 Pkg. L1 Inductor, 0603 Pkg. U1 HMC481MP86 / HMC481MP86E PCB [2] 107087 Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8-6