RoHS Compliance This component is compliant with RoHS directive. This component was always RoHS compliant from the first date of manufacture. SF2134E * Low-loss UHF SAW Filter * Surface Mount 3.0 x 3.0 mm Package 897.50 MHz SAW Filter Absolute Maximum Ratings Rating Value Units 5 dBm Input Power Level DC Voltage on any Non-ground Terminal 3 V Operable Temperature Range -45 to +105 C Specification Temperature Range -20 to +75 Storage Temperature Range in Tape and Reel C -40 to +85 Suitable for Lead-free Soldering - Maximum Soldering Profile C 260 C for 30 s SM3030-6 Electrical Characteristics Characteristic Sym Center Frequency fC Notes Min 897.5 Insertion Loss, 880 to 915 MHz IL 2.1 3.0 dB 1.0 2.0 dBP-P Amplitude Ripple, 880 to 915 MHz Typ Max Units MHz Attenuation Referenced to 0 dB DC to 860 MHz 17 19 925 to 935 MHz 5 12.4 935 to 960 MHz 20 24 980 to 2000 MHz 20 22 VSWR, 880 to 915 MHz 2:1 dB 2.6:1 Source Impedance ZS 50 Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity 674, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Terminals Input 2 Output 5 Case Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. 2. 3. 4. 5. 6. 7. 8. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. 2007 SF2134E (R) 3/21/19 Page 1 of 5 www.murata.com Filter Amplitude Response Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. 2007 SF2134E (R) 3/21/19 Page 2 of 5 www.murata.com Filter Input and Output Impedance Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. 2007 SF2134E (R) 3/21/19 Page 3 of 5 www.murata.com SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials K Materials N O N Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic Pb Free M M PCB Footprint Top View Top View Bottom View B 1 3 G 6 674 YWWS A 2 C 5 E 4 D Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. 2007 SF2134E (R) 3/21/19 Page 4 of 5 F H 6 1 5 2 4 3 I J www.murata.com Tape and Reel Specifications "B" REF. 100 REF. "B" Inches millimeters 7 13 178 330 Quantity Per Reel 500 3000 See Detail "A" 1 3. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions PIN #1 2.0 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm 4.0 A 1.50 1.75 0.3 0.05 Ao 674 YWWS Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. 2007 SF2134E (R) 3/21/19 Page 5 of 5 USER DIRECTION OF FEED www.murata.com