Glass passivated junction
Low Capacitance AC signal protection
Response time typically < 1 ns.
Molded case
The plastic material carries
U/L recognition 94 V-0
Terminal: Axial leads
Mounting instructions
1. Min. distance from body to soldering point,
4 mm.
2. Max. solder temperature, 350 °C.
3. Max. soldering time, 3.5 sec.
4. Do not bend lead at a point closer than
4 mm. to the body.
Maximum Ratings, According to IEC Publication No. 134
Steady State Power Dissipation at T
L
= 75 °C
Mounted in copper leaf area of 20 mm2
Operating temperature range
Storage temperature range
P
pp
P
M(AV)
I
FSM
T
j
T
stg
5000 W
8 W
500 A
65 to + 175 °C
65 to + 175 °C
Developped to suppress transient in the
automotive system, protecting mobile
transceivers, radios and tape decks from
overvoltages (width pulses).
Electrical Characteristics at Tamb = 25 °C
Rthj-l Max. thermal resistance (l = 10 mm.) 10 °C/W
VF
Max. forward voltage drop at I
F
= 100A 3.5 V
Peak pulse power with 10/1000 µs
exponential pulse
Non repetitive surge peak forward
current (t = 10 msec.)
Nov-07
Note 1: Valid only for Unidirectional.
(Note 1)
(Note 1)
R
5KP7.5C....5KP180C
5KP7.5....5KP180A
5000W Unidirectional and Bidirectional Load Dump Glass Passivated Automotive T.V.S.
Dimensions in mm. P-6
(Plastic)
ø1.3±0.05
ø9±0.1
59.5±1
8.7±0.3