4
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated)
*1
EE-SX47/67
Global Standard Slot-type
photomicrosensors with 50- to
100-mA direct switching capacity
for built-in application.
Series includes models that enable switching between
dark-ON and light-ON operation.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC
Models in which the light indicator turns ON for dark-ON
operation are also available.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature. *2
*1. Only the EE-SX67 Series has pre-wired models.
*2. Only for Pre-wired Models.
Be sure to read Safety Precautions on
page 8.
Ordering Information
Connector models
*3. These models can be used as Light-ON when the L terminal and positive (+) terminal are connected to each other. To use them as Dark-ON, do not connect these terminals
to each other. When used at light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector are short-circuited in advance.
Appearance Sensing
method
Connect-
ing method
Sensing distance Output
configuration Indicator mode Model
NPN output PNP output
Through-
beam
type
(with slot)
Connector
(4 poles)
Dark-ON/Light-ON
(selectable) *3
Incident light EE-SX670 EE-SX670P
No incident light EE-SX670A EE-SX670R
Light-ON Incident light EE-SX470 EE-SX470P
Dark-ON/Light-ON
(selectable) *3
Incident light EE-SX671 EE-SX671P
No incident light EE-SX671A EE-SX671R
Light-ON Incident light EE-SX471 EE-SX471P
Dark-ON/Light-ON
(selectable) *3
Incident light EE-SX672 EE-SX672P
No incident light EE-SX672A EE-SX672R
Light-ON Incident light EE-SX472 EE-SX472P
Dark-ON/Light-ON
(selectable) *3
Incident light EE-SX673 EE-SX673P
No incident light EE-SX673A EE-SX673R
Light-ON Incident light EE-SX473 EE-SX473P
Dark-ON/Light-ON
(selectable) *3
Incident light EE-SX674 EE-SX674P
No incident light EE-SX674A EE-SX674R
Light-ON Incident light EE-SX474 EE-SX474P
Dark-ON/Light-ON
(selectable) *3Incident light EE-SX675 EE-SX675P
Dark-ON/Light-ON
(selectable) *3Incident light EE-SX676 EE-SX676P
Dark-ON/Light-ON
(selectable) *3Incident light EE-SX677 EE-SX677P
Infrared li
g
ht
Standard
5 mm
(slot width)
L
-s
h
ape
d
T-shaped
Close-
mounting
Close-
mounting
T-shaped,
slot center:
10 mm
F-shaped
R-shaped
EE-SX47/67
5
Pre-wired Models and Models
*
These models can be used as Light-ON when the L line and positive (+) line are connected to each other.
To use them as Dark-ON, do not connect these lines to each other.
Accessories for Models with Connectors (Order Separately)
Appearance Sensing
method Sensing distance
Output
configura-
tion
Indicator
mode
Connecting
method
Model
NPN output PNP output
Through-
beam
type
(with slot)
Dark-ON/
Light-ON
(selectable) *
Incident
light
Pre-wired
models (1 m)
EE-SX670-WR EE-SX670P-WR
EE-SX671-WR EE-SX671P-WR
EE-SX672-WR EE-SX672P-WR
EE-SX673-WR EE-SX673P-WR
EE-SX674-WR EE-SX674P-WR
EE-SX675-WR EE-SX675P-WR
EE-SX676-WR EE-SX676P-WR
EE-SX677-WR EE-SX677P-WR
Infrared li
g
ht
Standard
5 mm
(slot width)
L
-s
h
ape
d
T-shaped,
slot center:
7 mm
Close-
mounting
Close-
mounting
T-shaped,
slot center:
10 mm
F-shaped
R-shaped
Type Cable
length Model Remarks
Connector EE-1001
EE-1001-1 L terminal and positive (+) terminal are already short-circuited.
EE-1009
Connector with Cable
1 m EE-1006
EE-1010
2 m EE-1006
EE-1010
Connector with Robot
Cable
1 m EE-1010-R
2 m EE-1010-R
Connector Hold-down Clip EE-1006A For EE-1006 only.
6
EE-SX47/67
Ratings and Specifications
*1. The indicator is a GaP red LED (peak wavelength: 690 nm).
*2. The response frequency was measured by detecting the rotating disk
shown at the right.
Item
Type Standard L-shaped
T-shaped, slot
center: 7 mm
Close-mounting
T-shaped, slot
center: 10 mm
F-shaped R-shaped
NPN
mod-
els
Connector
EE-SX670
EE-SX670A
EE-SX470
EE-SX671
EE-SX671A
EE-SX471
EE-SX672
EE-SX672A
EE-SX472
EE-SX673
EE-SX673A
EE-SX473
EE-SX674
EE-SX674A
EE-SX474
EE-SX675 EE-SX676 EE-SX677
Pre-wired
models
EE-SX670-
WR
EE-SX671-
WR
EE-SX672-
WR
EE-SX673-
WR
EE-SX674-
WR
EE-SX675-
WR
EE-SX676-
WR
EE-SX677-
WR
PNP
mod-
els
Connector
EE-SX670P
EE-SX670R
EE-SX470P
EE-SX671P
EE-SX671R
EE-SX471P
EE-SX672P
EE-SX672R
EE-SX472P
EE-SX673P
EE-SX673R
EE-SX473P
EE-SX674P
EE-SX674R
EE-SX474P
EE-SX675P EE-SX676P EE-SX677P
Pre-wired
models
EE-SX670P-
WR
EE-SX671P-
WR
EE-SX672P-
WR
EE-SX673P-
WR
EE-SX674P-
WR
EE-SX675P-
WR
EE-SX676P-
WR
EE-SX677P-
WR
Sensing distance 5 mm (slot width)
Sensing object Opaque: 2 × 0.8 mm min.
Differential distance 0.025 mm
Light source GaAs infrared LED with a peak wavelength of 940 nm
Indicator *1Light indicator (red) (turns ON when light is interrupted for models with A or R suffix)
Supply voltage 5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption 35 mA max. (NPN models), 30 mA max. (PNP models)
Control output
NPN open collector: 5 to 24 VDC, 100 mA max.
100 mA load current with a residual voltage of 0.8 V max.
40 mA load current with a residual voltage of 0.4 V max.
PNP open collector: 5 to 24 VDC, 50 mA max.
50 mA load current with a residual voltage of 1.3 V max.
Response frequency
*
2
1 kHz min. (3 kHz average)
Ambient illumination 1,000 lx max. with fluorescent light on the surface of the receiver.
Ambient temperature range
Operating: 25 to +55°C, Storage: 30 to +80°C
Ambient humidity range Operating: 5% to 85%, Storage: 5% to 95%
Vibration resistance Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2)
1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Enclosure rating IEC60529 IP50
Connecting method Special connectors (direct soldering possible), Pre-wired models (Standard cable length: 1 m)
Weight
(pack-
aged)
Connector
Approx. 3.1 g
Approx. 3 g
Approx. 2.4 g Approx. 2.3 g
Approx. 3 g
Approx. 2.7 g Approx. 2.2 g Approx. 2.2 g
Pre-wired
models
Approx. 18.9 g Approx. 17.3 g Approx. 17.8 g Approx. 16.8 g
Approx. 17.1 g Approx. 18.3 g Approx. 16.9 g Approx. 16.9 g
Ma-
terial
Case Polybutylene phthalate (PBT)
Cover emitter/receiver
Polycarbonate
Dis
k
1 mm
1 mm
2.1 mm
t = 0.2 mm
EE-SX47/67
7
Engineering Data (Typical)
I/O Circuit Diagrams
NPN Output
Sensing Position Characteristics Sensing Position Characteristics
Repeated Sensing Position Characteristics
Tr ON
Tr
OFF
0 1.0 2.0 3.0 4.0 5.0 6.0
Distance d (mm)
Dark-ON
d
Tr ON
Tr
OFF
0 1.0 2.0 3.0 4.0 5.0 6.0
Distance d (mm)
Dark-ON
d
d
OFF
ON
0 3.00 3.02 3.04 3.06 3.08
Output level transistor
Distance d
(
mm
)
Ta = 25°CTa = 55°CTa = 25°C
Δd3 Δd1
Δd2
Δd4
Δd5
Vcc =12 V, No. of repetitions: 20, Δd1 = 0.002 mm,
Δd2 = 0.004 mm, Δd3 = 0.005 mm, Δd4 = 0.02 mm,
Δd5 = 0.04 mm
Model
Output
configuration
Timing chart Terminal
connection Output circuit
EE-SX67@
EE-SX67@-WR
Light-ON
Short-circuited
between
terminal and
positive
terminal
Dark-ON
Open between
terminal and
positive
terminal
EE-SX670A
EE-SX671A
EE-SX672A
EE-SX673A
EE-SX674A
Light-ON
Short-circuited
between
terminal and
positive
terminal
Dark-ON
Open between
terminal and
positive
terminal
EE-SX470
EE-SX471
EE-SX472
EE-SX473
EE-SX474
Light-ON ---
Incident
Interrupted
ON
OFF
ON
OFF
Operates
Releases
Light indicator
(red)
Output
transistor
Load
(e.g., relay)
L
Main
circuit (Control output)
100 mA max.
5 to 24 VDC
L
OUT
IC
1
2
3
4
Light indicator
(red)
Load
Incident
Interrupted
ON
OFF
ON
OFF
Operates
Releases
Light indicator
(red)
Output
transistor
Load
(e.g., relay)
L
Incident
Interrupted
ON
OFF
ON
OFF
Operates
Releases
Light indicator
(red)
Output
transistor
Load
(e.g., relay)
L
Incident
Interrupted
ON
OFF
ON
OFF
Operates
Releases
Light indicator
(red)
Output
transistor
Load
(e.g., relay)
L
Incident
Interrupted
ON
OFF
ON
OFF
Operates
Releases
Light indicator
(red)
Output
transistor
Load
(e.g., relay)
5 to 24 VDC
IC
OUT
Light indicator
(red)
Load
Main
circuit
8
EE-SX47/67
PNP Output
Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Operating Environment
These Photomicrosensors have an IP50 (conforms to IEC60529)
enclosure and do not have a water-proof or dust-proof structure.
Therefore, do not use them in applications in which the sensor will be
subjected to splashes from water, oil, or any other liquid. Liquid
entering the Sensor may result in malfunction.
Make sure that this product is used within the rated ambient
environment conditions.
Installation
When direct soldering to the terminals, use the following guidelines.
Soldering Conditions
The terminal base uses a polycarbonate resin, which could be
deformed by excessive soldering heat, resulting in damage to the
product's functionality.
Model
Output
configuration
Timing chart Terminal
connection Output circuit
EE-SX67@P
EE-SX67@P-WR
Light-ON
Short-circuited
between
terminal and
positive
terminal
Dark-ON
Open between
terminal and
positive
terminal
EE-SX670R
EE-SX671R
EE-SX672R
EE-SX673R
EE-SX674R
Light-ON
Short-circuited
between
terminal and
positive
terminal
Dark-ON
Open between
terminal and
positive
terminal
EE-SX470P
EE-SX471P
EE-SX472P
EE-SX473P
EE-SX474P
Light-ON ---
Incident
Interrupted
ON
OFF
ON
OFF
Operates
Releases
Light indicator
(red)
Output
transistor
Load
(e.g., relay)
L
L
OUT
IC
1
2
4
3
Light indicator (red)
Main
circuit
5 to 24 VDC
Load
Incident
Interrupted
ON
OFF
ON
OFF
Operates
Releases
Light indicator
(red)
Output
transistor
Load
(e.g., relay)
L
Incident
Interrupted
ON
OFF
ON
OFF
Operates
Releases
Light indicator
(red)
Output
transistor
Load
(e.g., relay)
L
Incident
Interrupted
ON
OFF
ON
OFF
Operates
Releases
Light indicator
(red)
Output
transistor
Load
(e.g., relay)
L
Incident
Interrupted
ON
OFF
ON
OFF
Operates
Releases
Light indicator
(red)
Output
transistor
Load
(e.g., relay)
5 to 24 VDC
Load
Main
circuit
OUT
IC
Light indicator (red)
WARNING
Precautions for Safe Use
Precautions for Correct Use
Item Temper-
ature
Permissible
time Remarks
Soldering
iron
350°C
max.
3 s
max.
The portion between the base of the
terminals and the position 1.5 mm from
the terminal base must not be soldered.
EE-SX670
376d
EE-SX@70@
Lot number and
factory code
Model number
In the right illustration, 376d
indicates the lot number and factory
where the product was
manufactured. Do not include this
code with the model number when
ordering.
L
o
t
N
um
b
ers an
d
M
o
d
e
l
s
EE-SX47/67
9
Dimensions (Unit: mm)
Sensors
EE-SX670/670P
EE-SX670A/670R
EE-SX470/470P
19
13.4
5
13.8
9
13.2
6.2
5.5
3.8
2.54
25.4
19
6.95
6.4
0.8
2
0.3 0.7
32 41
2.5
3
8.4
Two, 3.2 dia.
holes
Four, R1
Optical
axis
Two,
3.8 dia.
holes
Indicator window
Terminal Arrangement
* L Terminal needs no connection
for all EE-SX47@ series sensors.
(1) Vcc
(2) LL*
(3) OUT OUTPUT
(4) GND (0 V)
EE-SX671/671P
EE-SX671A/671R
EE-SX471/471P
19
19
26.2
13.4
13
13.4
5
13
9
2.54
3
14.5
6.2
8.3
7.2
3.2
3
3.8
9
3.6
2.1
0.7
6.2
0.6
0.3
2
7.2
15.5
0.8
6.95
6.35
32 41
Four, R1
Four, R2
Indicator window
Optical axis
Two, 3.2 dia. holes
Terminal Arrangement
* L Terminal needs no connection
for all EE-SX47@ series sensors.
(1) Vcc
(2) LL*
(3) OUT OUTPUT
(4) GND (0 V)
EE-SX672/672P
EE-SX672A/672R
EE-SX472/472P
19
13.4
5
13.7
3
13
2.54
22.2
6.2
6.3
9
6.4
3.8
2
13
0.8
2.5
4.3
0.3 0.7
2 3
14
7
2.5
3
8.4
6.2
6.3
26 12.6
Four, R1
Four, R1.6
Indicator
window
Optical axi
s
Terminal Arrangement
* L Terminal needs no connection
for all EE-SX47@ series sensors.
(1) Vcc
(2) LL*
(3) OUT OUTPUT
(4) GND (0 V)
EE-SX673/673P
EE-SX673A/673R
EE-SX473/473P
Terminal Arrangement
* L Terminal needs no connection
for all EE-SX47@ series sensors.
(1) Vcc
(2) LL*
(3) OUT OUTPUT
(4) GND (0 V)
13.4
5
7
2.54
22.2
6.2
9
12.8
6.3
3.5 (6.65)
14.4
3.8
2.8
4.9
2
0.8
0.3 0.7
32 41
Two, R1 Two, 3.2 dia. holes
Indicator window
Optical axis
10
EE-SX47/67
EE-SX674/674P
EE-SX674A/674R
EE-SX474/474P Terminal Arrangement
* L Terminal needs no connection
for all EE-SX47@ series sensors.
(1) Vcc
(2) LL*
(3) OUT OUTPUT
(4) GND (0 V)
7
13.6
5
13
2.54
3
21.5
6.2
(9.3)
6.2
6.95
7
3
3.8
(2.9)
2.1
0.7
0.6
0.3
2
2.6
15.
5
0.8
32 4
1
Two, R1 Two, 3.5 dia. holes
Indicator window
Optical axis
EE-SX675/675P
Terminal Arrangement
(1) Vcc
(2) LL
(3) OUT OUTPUT
(4) GND (0 V)
5
13.4
16.7
4
26
3
8.4
2.5
(R)
(R)
3.2
3.7
0.8
2
13
19.5
0.3
0.7
6.3
6
10
6.35
Indicator windo
w
Optical axis
Optical axis
Detection
window
23
14
16.7
13
2.54
22.2
9
6.2 3.8
EE-SX676/676P
Terminal Arrangement
(1) Vcc
(2) LL
(3) OUT OUTPUT
(4) GND (0 V)
2.5
5
8.4 3
3.8
2.5
6.35
13.2
0.8
9
7
0.3
3.3
2
0.7
13.6
7
2.54
32 41
13.7
7
13.4
9
22.2
6.2
Indicator window
Optical axis
Optical axis
Detection
window
Two, 3.5 dia. holes
EE-SX677/677P
Terminal Arrangement
(1) Vcc
(2) LL
(3) OUT OUTPUT
(4) GND (0 V)
2.5
7
13.4
22.2
6.2 3.8
13.2
6.35
7
0.8
2
13.6
9
7
3.3
0.3
0.7
13.7
5
2.5
8.4 3
9
2.54
32 41
Detection window
Two, 3.5 dia. holes
Indicator
window
Optical axis
Optical axis
EE-SX47/67
11
EE-SX670-WR/670P-WR
Terminal Arrangement
Brown Vcc
Pink L
Blue GND (0 V)
Black OUTPUT
R1
19
25.4
6.35
6.95
26.2
2
2.5
13.8
11
8.4
9
11.2
13.4
50.8
5.5
3
2
Optical axis
3.2 dia. holes
Optical axis
Indicator window
3.8 dia. holes
4.6 dia. holes
Detection window
Robot cable with 2.8 dia., 4 conductors,
(conductor cross-section: 0.15 mm2,
insulator diameter: 0.8 mm); Standard
length: 1 m
EE-SX671-WR/671P-WR
Terminal Arrangement
Brown Vcc
Pink L
Blue GND (0 V)
Black OUTPUT
26.2
19
6.95
18.7
3
13.4
13.4
5
3
9
9
3.6
6.35
0.8
2
6.2
2.8
3.2
R3.5
R1
15.5
19
7.2
2
Indicator window
Optical axis
Optical axis Detection window
4.6 dia.
holes
3.2 dia. holes
Robot cable with 2.8 dia., 4 conductors,
(conductor cross-section: 0.15 mm2,
insulator diameter: 0.8 mm); Standard
length: 1 m
EE-SX672-WR/672P-WR
Terminal Arrangement
Brown Vcc
Pink L
Blue GND (0 V)
Black OUTPUT
13.7
7
12.6
13.4
5
3
9
2.5
8.4
26.2
2
26
19
10.3
6.2
13
6.35
0.8
2
4.3
2.5
R1.6
R1
3
Indicator
window
Optical axis
Detection window
Optical
axis
4.6 dia.
holes Robot cable with 2.8 dia.,
4 conductors, (conductor
cross-section: 0.15 mm2,
insulator diameter: 0.8 mm);
Standard length: 1 m
EE-SX673-WR/673P-WR
Terminal Arrangement
Brown Vcc
Pink L
Blue GND (0 V)
Black OUTPUT
(6.65)
6.3
14.4
8.9
92
26.2
2
12.8
2.8
3.5
R1
0.8
13.4
5
7
Optical axis
Optical axis
3.2 dia. holes
Detection window
Indicator window
2 dia. holes
4.6 dia. holes
Robot cable with 2.8 dia.,
4 conductors, (conductor
cross-section: 0.15 mm2,
insulator diameter: 0.8 mm);
Standard length: 1 m
12
EE-SX47/67
EE-SX674-WR/674P-WR Terminal Arrangement
Brown Vcc
Pink L
Blue GND (0 V)
Black OUTPUT
7
7R1
25.7
6.95
3
3
2
13.6
5
(2.9)
9
6.2 2.8
2
0.8
2.6
15.5
7
3.5 dia. holes
Indicator window
Optical
axis
Detection window
Optical axis
4.6 dia.
holes
Robot cable with 2.8 dia.,
4 conductors, (conductor
cross-section: 0.15 mm2,
insulator diameter: 0.8 mm);
Standard length: 1 m
EE-SX675-WR/675P-WR Terminal Arrangement
Brown Vcc
Pink L
Blue GND (0 V)
Black OUTPUT
2
3.7
(R)
(R)
6 3.2
13
10.3
2
19.5
16.7
13.4
3
26.2 8.4
9
2.5
13.4
5
10
4
6.35 26
0.8
Optical axis
Detection window
Indicator
window
Optical axis
4.6 dia. holes
Robot cable with 2.8 dia., 4 conductors,
(conductor cross-section: 0.15 mm2,
insulator diameter: 0.8 mm); Standard
length: 1 m
EE-SX676-WR/676P-WR Terminal Arrangement
Brown Vcc
Pink L
Blue GND (0 V)
Black OUTPUT
3
2.5
Indicator
window
8.4
2
26.2
9
13.4
5
13.7
7
6.4
13.2
7
2
0.8
9
7
13
3.3
2.5
4
Optical axis
Detection
window
3.5 dia. holes
Optical
axis
4.6 dia. holes
Robot cable with 2.8 dia.,
4 conductors, (conductor
cross-section: 0.15 mm2,
insulator diameter: 0.8 mm);
Standard length: 1 m
EE-SX677-WR/677P-WR Terminal Arrangement
Brown Vcc
Pink L
Blue GND (0 V)
Black OUTPUT
3.3
4
7
9
7
6.4
13.2
13
2
26.2 8.4 2.5
9
13.4
5
13.7
7
2.5
3
2
0.8
Optical axis
Optical axis
Indicator
window
3.5 dia. holes
4.6 dia. holes
Detection window
Robot cable with 2.8 dia., 4 conductors,
(conductor cross-section: 0.15 mm2,
insulator diameter: 0.8 mm); Standard
length: 1 m
EE-SX47/67
13
EE-SX47/67 Connector Hold-down Clips
Connector
EE-1001 13
4
2.54 ±
0.15
2.9 ±
1
0.6
10.8
6
Connector (short-circuited between positive (+) and L terminals)
EE-1001-1
3.9
±
0.4
2.8
±
0.1
0.6
10.8
6
5
1.5
0.8
13
4
1.4
2.5
3
±
0.3
7.62
2.54 5.5
±
0.4
11.8
5.3
2.54
0.6
16.2
20
2000
25
15
3 24 1
Cable:
Vinyl-insulated round
cable of 4 dia., 4 cores,
(0.2 mm2 with 1.1-dia.
insulator)
Connector with Cable
EE-1006
Terminal Arrangement
(1) Brown
(2) LPink
(3) OUT Black
(4) Blue
1.2
(R1)
2
5.5
R3
10.2
19.4
21.9
15
25.2
19
12
3.2
2.13
3
3.6
3.4
Four,
R1.6
Connector Hold-down Clip
EE-1006A
Materials: Stainless steel
Connector with Cable
EE-1010
Connector with Robot Cable
EE-1010-R 0.6
4
2.54
7.62
13
Two, C1
5
13.5
20
±
5
25
±
5
15
±
5
1.4
2.5
2000
3 24 1
EE-1010 cable
EE-1010-R cable:
Vinyl-insulated round
cable of 4 dia., 4 cores,
(0.2 mm2 with 1.1-dia.
insulator)
Terminal Arrangement
(1) Brown
(2) LPink
(3) OUT Black
(4) Blue
Connector
EE-1009
13
4
9
4.5
0.8
1.5
1.2
51.4 2.5
0.6
2.5 2.54
7.62
Two, C1
In the interest of product improvement, specifications are subject to change without notice.
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter-
est in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
17. Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability
. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “includingmeans “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyers application or use of the Product. At Buyers request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod-
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
3. Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
Cat. No. E382-E1-EESX4767 08/10 Note: Specications are subject to change. © 2010 Omron Electronics LLC
OMRON CANADA, INC. • HEAD OFFICE


OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE

OMRON ELECTRONICS MEXICO SA DE CV • HEAD OFFICE

OMRON ARGENTINA • SALES OFFICE

OMRON CHILE • SALES OFFICE

OTHER OMRON LATIN AMERICA SALES

OMRON ELECTRONICS LLC • THE AMERICAS HEADQUARTERS
OMRON EUROpE B.V.
