www.hamlin.com
Series 55100
Hall Option
Cable Length
Termination
55100 XX XX X
N o t e s :
1 ) Ad d c a p c i t o r Cn as
shown, close to the
sensor, for transient
suppression if required.
2 ) Ad d r e s i s t o r Rpu as
shown for sinking output
55100 Miniature Flange Mount Hall Effect Proximity Sensor
Features
Magnetically operated position sensor
Digital, latching or programmable analogue
types available
Medium, high or programmable sensitivities
3 wire (voltage output) or 2 wire (current
output) versions
Reverse/Over voltage protection
Built in temperature compensation
Benefits
High switching speed up to 10kHz
Long life; up to 20 billion operations
Unaffected by harsh environments
Operates in static or dynamic magnetic
field
Customer selection of cable length and
connector type
Applications
Position and limit sensing
RPM measurement
Flow metering
Commutaion of brushless dc motors
Angle sensing
Magnetic encoders
Hamlin USA
Tel: +1 920 648 3000 Fax: +1 920 648 3001 Email: sales.us@hamlin.com
Hamlin Europe
Tel: +44 (0)1603 257700 Fax: +44 (0)1603 257702 Email: sales.uk@hamlin.com
Hamlin China
Tel: +86 (0) 512 69365 800 Fax: +86 (0) 512 69365 811 Email: sales.cn@hamlin.com
DRGNo: 55100XXXXX REV : AG Date:9/6/12 DCR: B9016
DIMENSIONS (in) mm BLOCK DIAGRAM
SPECIFICATIONS
Digital Switch or Digital Latch Digital Switch or Digital Latch A - Analogue
Hall Type 3 Wire (Voltage Output) 2 Wire (Current Output) (Programmable Only) (Note 2)
Supply Voltage (Note 1) Absolute Ratings Vdc -15 to +28 -15 to +28 8.5
Operate Vdc +3.8 to +24 +3.75 to +24 4.5 - 5.5
Overvoltage Protection Vdc - max. 32 32 19.5
Output High Voltage Vdc Sinking output N/A 4.65
Output Low Voltage Vdc - max. 0.4 @ 10mA N/A 0.35
Output Current (continuously on) mA - max. 10 N/A -1.0 to +1.0
Current Consumption Over
Temperature Range
Low
High
mA
mA
1.6 - 5.2
1.6 - 5.2
5 - 6.9
12 - 17
2 - 10
2 - 10
Switching Speed mA 10 10 2
Temperature Operating
Storage
°C
°C
-40 to +100
-65 to +105
-40 to +100
-65 to +105
-40 to +100
-65 to +105
Note 1: As long as Tj (Junction Temperature max. Is not exceeded.
Note 2: Preprogrammed by Hamlin or Customer pending agreement.
CUSTOMER OPTIONS - Sensitivity, Cable Length and Termination Specification
HALL OPTIONS
ACTIVATE DISTANCES ARE APPROXIMATE
USING NEFEB MAGNET
(.827l x .276W x .185H) 21 x 7 x 4.7
HAMLIN P/N 5812334000
Select Hall Option Hall Type Sensitivity Gauss
(typ.)
Activate - d (in)
mm
2M 2 Wire Switch 120 (.531) 13,5
2H 2 Wire Switch 57 (.728) 18,5
2L 2 Wire Latch 40 (.827) 21,0
3M 3 Wire Switch 130 (.492) 12,5
3H 3 Wire Switch 59 (709) 18,0
3L 3 Wire Latch 86 (.394) 10,0
AP Analog Programmable Consult Hamlin
Cable Length:-
(Cable Type 24AWG 7/32 PVC 105° C
UL 1430/UL1569)
Standard Lengths
SELECT
OPTION
CABLE
LENGTH
(in) mm
01 (3.94) 100
02 (11.81) 300
03 (19.69) 500
04 (29.53) 750
05 (39.37)
1000
Termination Options:-
SELECT OPTION DESCRIPTION (2 WIRE VERSION ILLUSTRATED
A Tinned Leads
D AMP MTE 2.54mm pitch
E JST XHP 2.5mm pitch
ORDERING INFORMATION
Table 2
TABLE 1 TABLE 2 TABLE 3
Table 1
Table 3