Rectifier diode 1SR139-600 Dimensions (Unit : mm) Applications General rectification 6 Features 1) Cylindrical mold. (MSR) 2) High reliability. Construction Silicon diffused junction Taping specifications (Unit : mm) Absolute maximum ratings (Ta=25C) Parameter Symbol Absolute peak reverse voltage VRMS Reverse voltage (repetitive peak) VR Average rectified forward current Io Forward current surge peak (60Hz / 1cyc) IFSM Junction temperature Tj Storage temperature Tstg Electrical characteristics (Ta=25C) Parameter Symbol VF Forward voltage Reverse current www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. IR Limits Unit V V A A 750 600 1 40 150 -40 to +150 C C Min. - Typ. - Max. 1.1 Unit V - - 10 A 1/3 Conditions IF=1.0A VR=600V 2010.04 - Rev.E Data Sheet 1SR139-600 Electrical characteristics curves 1 100 100000 Ta=150C Ta=25C Ta=150C Ta=-25C 0.01 100 200 400 600 800 1000 Ta=25C 10 0.001 0 Ta=75C 1000 1 1 1200 0 100 200 300 400 500 0 600 930 920 AVE:926.8mV 910 20 25 30 200 150 100 AVE:30.86nA 50 Ta=25C f=1MHz VR=0V n=10pcs 45 Ta=25C VR=600V n=30pcs 250 40 35 30 25 20 15 AVE:18.1pF 10 5 0 900 0 VF DISPERSION MAP IR DISPERSION MAP Ct DISPERSION MAP 2 RESERVE RECOVERY TIME:trr(us) 1cyc Ifsm 100 8.3ms 50 AVE:64.0A 1.8 1.7 100 Ta=25 IF=0.5A IR=1A Irr=0.25*IR n=10pcs 1.9 AVE:1.869us PEAK SURGE FORWARD CURRENT:I FSM(A) 150 1.6 1.5 1.4 1.3 1.2 1 100 0 100 100 2 IM=1mA DC Rth(j-a) time(ms) td=300us 100 Rth(j-l) Rth(j-c) 10 1 0.001 0.01 0.1 1 10 TIME:t(s) Rth-t CHARACTERISTICS 2/3 100 1000 FORWARD POWER DISSIPATION:Pf(W) TRANSIENT THAERMAL IMPEDANCE:Rth (/W) 50 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS Mounted on epoxy board 1000 t www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 50 1 IF=0.5A Ifsm 8.3ms 1cyc 0 10000 10 TIME:t(ms) IFSM-t CHARACTERISTICS 8.3ms trr DISPERSION MAP IFSM DISRESION MAP 1 Ifsm 1.1 0 PEAK SURGE FORWARD CURRENT:I FSM(A) 15 50 CAPACITANCE BETWEEN TERMINALS:Ct(pF) REVERSE CURRENT:IR(nA) Ta=25C IF=1A n=30pcs 10 REVERSE VOLTAGE:V R(V) VR-Ct CHARACTERISTICS 300 940 5 REVERSE VOLTAGE : V R(V) VR-IR CHARACTERISTICS 950 FORWARD VOLTAGE:V F(mV) 10 Ta=-25C FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS PEAK SURGE FORWARD CURRENT:I FSM(A) f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) 0.1 Ta=125C 10000 Ta=125C REVERSE CURRENT:IR(nA) FORWARD CURRENT:I F(A) Ta=75C D=1/2 Sin(=180) 1 0 0 1 2 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS 2010.04 - Rev.E Data Sheet 1SR139-600 3 Sin(=180) D=1/2 0.01 DC 3 2.5 0A Io 0V VR t 2 T DC D=t/T VR=300V Tj=150C D=1/2 1.5 1 Sin(=180) 0.5 0 0 0 100 200 300 400 500 REVERSE VOLTAGE:V R(V) VR-PR CHARACTERISTICS 600 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) REVERSE POWER DISSIPATION:PR (W) 0.02 0A 0V 2.5 2 Io t DC 1.5 VR T D=t/T VR=300V Tj=150C D=1/2 1 Sin(=180) 0.5 0 0 25 50 75 100 125 AMBIENT TEMPERATURE:Ta() Derating Curve"(Io-Ta) 150 0 25 50 75 100 125 150 CASE TEMPARATURE:Tc() Derating Curve"(Io-Tc) ELECTROSTATIC DISCHARGE TEST ESD(KV) 30 25 20 15 10 AVE:10.6kV AVE:3.70kV 5 0 C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.04 - Rev.E Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A