Industrial PoE Switch 6SHFLFDWLRQ Technology Standard: IEEE802.3 10Base-T IEEE802.3u 100Base-TX/100Base-FX IEEE802.3af Power over Ethernet ,((([ARZFRQWURO Switch Technology: Store and forward technology and with 3.2Gbps internal switch fabric. Aggregate System Throughput: 1.49Mpps MAC Address: 1K MAC address Table Packet Buffer: 512Kbits Power over Ethernet port: Port 1~4, with 15.4w full power forwarding ability RJ-45 pin assignment: TX (3,6), RX (1,2), V+ (4,5), V- (7,8) PoE output voltage: DC 44~57V Interface Blinking)@100Mbps, (Yellow on/Yellow Blinking)@10Mbps Power Requirements System Power Input Voltage: 48VDC or -48VDC, dual power inputs in terminal block connection AC/DC Power Adapter 48VDC/1.6A (option) One DC jack for AC/DC power adapter Reverse Polarity Protection: Present Power Consumption: 6.5Watts without PD loading 70Watts with PD full loading Mechanical Installation: DIN-Rail mount, Wall mount or Desktop Case: IP-31 grade aluminum metal case Dimension: 33.8 mm (H) x 164.8 mm(W) x 108 mm (D) Environmental O O Regulatory Approvals Hi-Pot : 1.2KV testing passed on port to power EMI: FCC Class A, CE/EN55022 Class A EMS: EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11 Safety: CE/EN60950 Shock: IEC60068-2-27 Vibration: IEC60068-2-6 Free Fall: IEC60068-2-32 MTBF: 473,362 Hours, MIL-HDBK-217F GB standard Warranty: 5 years Ordering Information JetNet 3705f-m Industrial 4-port PoE Switch with one 100TX Switch Includes: -HW1HWIP3R(,QMHFWRUVSOXV0ESVEHUSRUW.06&FRQQHFWRU Quick Installation Guide/CD User Manual/DIN Rail Mount Kit JetNet 3705f-s Industrial 4-port PoE Switch with one 100TX Switch Includes: -HW1HWIV3R(,QMHFWRUVSOXV0ESVEHUSRUW.06&FRQQHFWRU Quick Installation Guide/CD User Manual/DIN Rail Mount Kit Optional Accessories 48VDC Power Adapter: U65S111-P2J 48VDC Din-Rail Power: DR-75-48 48VDC PoE Splitter: PD1205 JetNet 3705f Operating Temperature: -10 ~70 C Operating Humidity: 0% ~ 95%, (non-condensing) Storage Temperature: -40 ~ 80 C Storage Humidity: 0%~ 95%, (non-condensing) Industrial 5-port Unmanaged PoE Fiber Switch Number of Ports: 4 x 10/100 Base-TX with Power over Ethernet injector ,Auto MDI/MDI-X, Auto-Negotiation 1 x Fast Ethernet Fiber Connectors: 10/100 Base-TX: RJ-45 Fast Ethernet Fiber: SC Power/Relay: 6-Pin Terminal Block DC-Jack Cables: 10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm(100m) 100Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm(100m) Fiber port: Multi-mode (JetNet 3705-m) / Single mode (JetNet 3705f-s) Fiber Port parameters: Wavelength: 1310nm(Multi mode/Single mode) Available distance: 2km(Multi-mode)/30km(Single mode) Min. TX power: -19 dBm(Multi-mode)/-15 dBm(Single mode) Max. TX power: -14 dBm(Multi-mode)/-8 dBm(Single mode) Sensitivity: -31 dBm(Multi-mode)/-34 dBm(Single mode) Port Alarm DIP Switch: DIP 1~5: Enable (On) or Disable (Off) port link down alarm from port 1 to port 5 DIP 6: Enable (On) or Disable (Off) power alarm Diagnostic LED: Power x 3 (Green), Fault x 1(Red) PoE x 4(Green),Link/Activity x 5 (Green on / Green