PHOTOTRANSISTOR KPA-3010P3C WATER CLEAR LENS Features Description !MECHANICALLY AND SPECTRALLY MATCHED TO Made with NPN silicon phototransistor chips. THE KPA-3010 SERIES INFRARED EMITTING LED LAMP. !WATER CLEAR LENS. !PACKAGE :2000PCS/REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0536 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: SEP/17/2001 DRAWN:X.Q.ZHENG PAGE: 1 OF 3 Absolute Maximum Rating at T)=25C Par am et er Max . Rat in g s Collector-to-Emitter Breakdown Voltage 30V Emitter-to-Collector Breakdown Voltage 5V Power Dissipation at (or below) 25C Free Air Temperature 100mW Operating Temperature Range -40C ~ +85C Storage Temperature Range -40C ~ +85C Electrical And Radiant Characteristics at T)=25C Sy m b o l Par am et er Min . Ty p . Max . Un it Tes t Co n d ic t io n V BR C EO Collector-to-Emitter Breakdown Voltage 30 - - V I C=100uA Ee=0mW/cm2 V BR EC O Emitter-to-Collector Breakdown Voltage 5 - - V I E=100uA Ee=0mW/cm2 VCE (SAT) Collector-to-Emitter Saturation Voltage - - 0.8 V I C=2mA Ee=20mW/cm2 ICEO Collector Dark Current - - 100 nA VCE=10V Ee=0mW/cm2 TR Rise Time (10% to 90%) - 3 - us TF Fall Time (90% to 10%) - 3 - us 0.1 0.3 - mA I (ON) On State Collector Current SPEC NO: KDA0536 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: SEP/17/2001 DRAWN:X.Q.ZHENG VCE=5V IC=1mA RL=1000 VCE=5V Ee=1mW/cm2 =940nm PAGE: 2 OF 3 KPA-3010P3C SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0536 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: SEP/17/2001 DRAWN:X.Q.ZHENG PAGE: 3 OF 3