FRONT FILE NEXT FILE Type N I S S E I UP MMC METALLIZED POLYESTER FILM CAPACITOR Features MMH Smaller version of MMH type Very small size, achieved by our unique manufacturing method. Highly reliable because of its self-healing performance. Uniform flame-retardant epoxy resin coating through the latest resin technology. This provides miniature size and light weight. Specifications Temp range Voltage Capacitance Cap. tolerance Tangent of loss angle Insulation resistance -40+85+105 250V400V450V630V1000V1250Vd.c Endurance 85. W.V x125%, 1000hr C/C 5 or less within tan 0.01 IR C0.33 2,700 M or more C0.33 900 F or more Damp heat 40. 9095RH WV 500hr C/C 7 within tan 0.01 or less IR C0.33 2,700 M or more C0.33 900 F or more 0.008 at 1KHz) or less 15,000 M or more 5,000 F or more 250V 0.001010.0 450V 0.00103.3 400V 0.00104.7 630V 0.00102.2 E12 1000V 0.00100.47 1250V 0.00100.22 J 10K C0.33 C0.33 Marked temperature shows operatable range when voltage derated. Dimensions(mm) Type WV MMC E-12 CapF 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 395 475 565 685 825 106 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 W H MMC 250V.d.c. T P 10.3 7.0 4.0 7.4 4.3 4.4 7.5 F d W H MMC 400V.d.c. T P 5.0/7.5 0.6 10.3 7.0 4.0 7.6 7.8 4.4 F d 7.5 5.0/7.5 0.6 10.0 5.0/7.5/10.0 15.0 5.0/7.5/15.0 7.5 7.9 12.5 18.0 25.0 30.0 7.5 8.0 8.4 9.0 10.8 10.0 10.3 11.0 11.5 12.0 12.5 13.0 13.5 14.5 15.0 15.9 16.8 15.5 16.3 17.1 18.0 20.5 21.5 21.0 22.4 23.5 25.8 4.5 4.4 4.8 4.5 4.8 5.8 6.0 5.0 5.5 6.0 6.5 4.9 5.3 5.5 6.0 6.5 7.4 8.0 9.0 7.5 8.5 9.4 10.3 11.0 12.0 11.8 13.0 14.3 15.9 12.5 18.0 10.0 15.0 5.0/7.5/10.0 5.0/7.5/15.0 25.0 0.8 22.5 7.5/15.0 22.5 27.5 27.5 8-14 30.0 7.6 7.9 8.2 9.0 8.0 8.3 10.0 10.5 11.0 12.0 10.2 12.0 12.5 13.0 13.5 14.0 15.0 16.5 15.3 16.0 16.8 17.7 18.8 19.5 18.7 19.8 21.0 22.3 23.6 25.2 4.5 4.8 5.5 4.9 5.2 5.5 6.0 5.5 6.0 6.5 7.0 7.7 8.5 7.5 8.2 9.0 10.0 11.0 10.0 9.3 10.4 11.6 13.0 14.2 15.8 0.8 22.5 22.5 27.5 27.5 When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 19 - Type N I S S E I MMC METALLIZED POLYESTER FILM CAPACITOR Single formed lead type Max T Max H Max W P 1.5 20Min 1.5Max Style Straight lead type d0.05 5.0Max 5.0Max 5.00.5 5.00.5 Cap Cap range F 0.8 F 0.8 250 V.d.c 102 106 102 106 184 155 400 V.d.c 102 475 102 475 393 474 450 V.d.c 102 335 102 335 393 474 630 V.d.c 102 225 102 225 103 224 1000V.d.c 102 474 102 223 273 474 1250V.d.c 102 224 102 682 822 224 F P For a pitch space (F) of the taping specification, refer to "TAPING DIMENSION"on p.5. Dimensions(mm) Type WV MMC E-12 CapF 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 MMC 450V.d.c. T P W H 10.3 7.0 4.0 7.6 7.8 4.4 12.5 18.0 25.0 30.0 7.6 7.9 8.2 9.0 8.0 8.3 10.0 10.5 11.0 12.0 10.2 12.0 12.5 13.0 13.5 14.0 15.0 16.5 15.3 16.0 16.8 17.7 18.8 19.5 21.5 23.0 25.0 26.5 4.5 4.8 5.5 4.9 5.2 7.5 F d W H 5.0/7.5 0.6 10.3 7.5 12.5 8.2 10.0 10.5 10.0 5.0/7.5/15.0 18.0 5.5 6.0 5.5 15.0 6.0 6.5 7.0 7.7 8.5 7.5 8.2 9.0 10.0 11.0 10.0 11.0 12.5 14.0 15.5 0.8 22.5 25.0 22.5 30.0 27.5 8-14 27.5 11.0 12.5 13.0 10.5 11.0 11.5 13.0 13.5 14.5 16.0 16.5 16.8 17.5 18.0 19.0 20.0 21.5 20.0 21.0 22.0 24.0 25.5 27.3 MMC 630V.d.c. T P F d 4.5 7.5 5.0/7.5 0.6 4.0 4.5 5.0 10.0 5.0/7.5/10.0 15.0 5.0/7.5/15.0 5.3 5.5 6.0 6.5 5.5 6.0 6.5 7.0 8.0 9.0 7.5 8.0 8.7 9.5 10.5 11.5 10.5 11.5 12.5 14.3 15.5 17.5 0.8 22.5 22.5 27.5 27.5 When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 20 - N I S S E I Type MMC METALLIZED POLYESTER FILM CAPACITOR Dimensions(mm) Type WV MMC E-12 CapF 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 MMC 1000V.d.c. T P W H 15.5 11.0 6.0 11.5 12.0 11.5 12.0 12.5 13.0 11.0 6.5 6.0 6.5 7.0 7.5 6.0 12.5 F d W H 10.0 0.6 15.5 11.0 12.5 21.0 26.0 31.0 12.0 12.5 13.0 15.5 13.0 14.0 14.5 15.5 17.0 18.0 18.5 20.0 18.5 20.0 22.0 23.0 25.0 24.0 26.0 27.5 21.0 7.0 7.5 6.0 6.5 7.0 7.5 0.8 17.5 26.0 11.5 12.0 11.5 12.0 12.5 13.0 15.0 12.0 12.5 13.0 13.5 14.5 15.0 15.5 16.0 16.5 17.0 31.0 8.5 9.0 10.0 9.0 10.0 10.5 12.0 13.5 13.0 14.0 15.5 22.5 17.5 27.5 22.5 17.5 18.5 19.5 20.5 23.0 24.5 26.5 MMC 1250V.d.c. T P 6.0 F d 12.5 10.0 0.6 17.5 12.5 6.5 6.0 6.5 7.0 7.5 5.0 5.5 6.0 6.5 7.0 6.0 6.5 7.0 8.0 7.5 8.0 9.0 10.0 11.5 12.0 13.0 14.5 0.8 22.5 17.5 27.5 22.5 Characteristics of voltage derating to frequency MMC 1000V MMC 1250V 1000 1000 500 102 100 474 Vrms Permissible Voltage Vrms Permissible Voltage 400 102 100 223 473 102 103 Hz Frequency 104 105 102 103 Hz Frequency 104 224 105 If DC biasses are contained, Vo-p should not exceed the rated voltage. DCVo-p Characteristics of permissible current to frequency MMC 1000V MMC 1250V 10 10 474 1 103 473 104 Hz Frequency 105 8-14 Arms Permissible Current Arms Permissible Current 224 106 1 223 103 104 Hz Frequency 105 106 When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 21 - Type N I S S E I MMH METALLIZED POLYESTER FILM CAPACITOR Features Very small size, achieved by our unique manufacturing method. Highly reliable because of its self-healing performance. Uniform flame-retardant epoxy resin coating from the latest resin technology. This provides miniature size and light weight. Available in series from low voltage to high voltage. Specications Temp range Voltage Insulation resistance -40+85+105 100V250V400V630V1,000V1,250Vd.c Capacitance 100V...0.0334.7F 250V...0.0473.3F 400V...0.0221.5F 630V...0.00100.68F Cap. tolerance 10 C0.33F 15,000 M or more C0.33F 5,000 F or more Endurance 85. WV x125%, 1000hr C/C 5 tan 0.01 or less within IR C0.33F 2,700 M or more C0.33F 900 F or more Damp heat 40 9095RH WV 500hr C/C 7 tan 0.01 or less within IR C0.33F 2,700 M or more C0.33F 900 F or more 1,000V...0.00100.22F 1,250V...0.00100.1F E-12 Tangent of loss angle 0.008 at 1KHz) or less Marked temperature shows operatable range when voltage derated. Dimensions(mm) WV Type MMH E-12CapF MMH100V.d.c. W H T P MMH 250V.d.c. F d W H T P MMH 400V.d.c. F d W H T P F d 13.0 7.0 4.0 10.0 5.0/7.5/10.0 0.6 7.5 4.5 223 0.022 273 0.027 333 0.033 393 0.039 473 0.047 563 0.056 683 0.068 823 0.082 104 0.10 124 0.12 7.5 154 0.15 8.0 4.0 10.5 184 0.18 4.3 11.0 5.5 224 0.22 4.5 11.5 6.0 15.0 274 0.27 9.8 10.5 5.0 334 0.33 11.0 394 0.39 11.5 5.0 12.5 5.5 474 0.47 12.0 5.3 13.0 6.0 564 0.56 684 0.68 824 0.82 13.5 5.7 105 1.0 14.0 6.0 125 1.2 12.0 5.5 155 1.5 13.0 6.0 185 1.8 13.5 6.5 225 2.2 14.0 7.3 275 2.7 13.5 6.5 335 3.3 15.0 7.0 395 3.9 16.0 7.5 475 4.7 17.0 8.0 9.5 5.5 3.5 7.5 5.0/7.5 0.5 9.0 9.5 10.0 7.5 4.5 8.0 5.0 7.5 5.0/7.5 0.6 10.0 8.5 13.0 10.0 12.5 7.0 3.8 25.0 10.0 5.0/7.5/10.0 9.5 10.0 18.0 10.5 10.0 5.0/7.5/10.0 0.6 15.0 5.0/7.5/15.0 0.8 15.5 7.0 15.0 6.0 15.5 6.5 16.0 7.3 17.0 8.0 17.5 9.0 18.5 10.5 19.5 11.0 30.0 22.5 22.5 8-14 6.5 7.0 11.0 5.5 12.0 6.5 12.5 7.0 8.5 5.0 15.0 5.0/7.5/15.0 25.0 0.8 22.5 22.5 30.0 27.5 15.0 5.0/7.5/15.0 6.5 8.0 15.0 25.0 10.0 10.5 18.0 5.0 12.0 6.4 18.0 4.5 5.0 10.5 15.5 8.5 16.5 9.0 17.5 7.0 18.0 7.5 19.0 8.5 19.5 9.5 20.5 10.5 21.5 11.5 0.8 22.5 22.5 27.5 27.5 27.5 When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 22 - Type N I S S E I MMH METALLIZED POLYESTER FILM CAPACITOR Straight lead type 20Min Max H 1.5Max Style Double formed lead type Max T Max W P 1.5 Cap Cap range Single formed lead type 5.0MAX 5.0MAX 3.5Max 0.90.4 3.5Max 0.90.4 5.00.5 5.00.5 3.50.5 3.50.5 F 0.8 d0.05 F 0.8 100 V.d.c 333 475 333 475 564 225 250 V.d.c 473 335 473 335 823 684 400 V.d.c 223 155 223 155 223 394 630 V.d.c 102 684 102 684 102 124 1000 V.d.c 102 224 822 223 1250 V.d.c 102 104 F1 0.5 F1 0.5 333 474 F1=5.0 564 105 F1=7.5 102 224 102 224 F For F-dimension of double formed leads, please contact Nissei. F P For a pitch space (F) of the taping specification, refer to "TAPING DIMENSION"on p.5. Dimensions(mm) WV Type MMH E-12CapF MMH 630V.d.c. MMH 1,000V.d.c. W H T P F d W H T 12.5 7.5 4.5 10.0 5.0/7.5/10.0 0.6 19.0 10.5 5.5 P MMH 1,250V.d.c. F 15.5 7.5/10.0 d W H T 0.6 19.0 10.5 5.5 102 0.0010 122 0.0012 152 0.0015 182 0.0018 222 0.0022 272 0.0027 332 0.0033 392 0.0039 472 0.0047 562 0.0056 13.0 7.0 13.0 682 0.0068 13.5 7.5 13.5 7.5 822 0.0082 12.0 6.0 103 0.010 12.5 6.5 123 153 11.0 11.5 5.0 6.5 11.5 12.0 6.5 13.0 26.0 0.012 8.0 4.5 0.015 9.5 4.0 14.0 183 0.018 10.0 4.5 15.0 223 0.022 10.5 5.0 16.0 8.5 273 0.027 15.0 7.0 333 0.033 15.5 7.5 16.0 393 0.039 473 0.047 17.5 8.5 18.0 9.0 563 0.056 5.5 18.0 9.0 683 0.068 6.0 19.0 10.0 20.0 9.5 823 0.082 13.5 20.5 10.0 104 0.10 14.0 22.0 10.5 124 0.12 15.5 154 0.15 13.5 6.0 22.0 11.5 184 0.18 14.0 6.5 23.0 12.5 224 0.22 16.0 7.0 24.0 13.5 274 0.27 17.0 8.0 334 0.33 17.5 8.5 394 0.39 18.5 9.5 474 0.47 564 684 26.0 11.0 11.0 25.0 30.0 7.0 8.0 21.5 12.5 5.0/7.5/15.0 22.0 31.0 8.5 20.0 9.5 0.68 21.0 10.5 0.8 31.0 22.5 27.5 22.5 0.8 14.5 7.0 15.0 8.0 15.5 26.5 17.5 30.5 22.5 0.8 8.5 17.0 34.0 20.0 0.56 12.5 14.0 17.0 15.0 6.5 19.0 21.5 7.5 5.5 5.0 7.0 7.0 4.0 10.5 0.6 12.0 7.5 18.0 d 6.0 7.5/12.5 13.0 F 11.0 6.0 10.0 P 15.5 7.5/10.0 10.5 20.5 26.5 17.5 27.5 8-14 When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 23 - NISSEI PART NUMBER CODE SYSTEM (1) (2) Type (3) Lead Internal con fig use uration (4) Rated voltage (5) CapacitanceCapacitance tolerance value Model Code (Standard "0000") (6) Lead Dimensions Packing Mode code *2 (2) Lead configuration code Code *1 C Lead configuration Typical Code Samples Straight lead Single formed (leads) 5.0 Code 0200 22.5 0225 25.0 0250 27.5 0275 0125 0150 Style Code 1 0200 *4 2 D200 3 D210 Formed leads type Lead taping for automatic insertion machine (Straight leads) 0175 20.0 Lead spacing (F) after forming indicated as multiplied by 10.Always in bulk Type S 17.5 0100 15.0 Lead taping for automatic insertion machine (Formed leads) Code 0075 12.5 Double formed (leads) Lead length multiplied by 10.Always in bulk F (mm) Lead spacing 0050 *3 10.0 V No lead processing and always in bulk (0000) 0050 Cut shorter (cut leads) 7.5 D Description 0000 F (mm) Lead spacing F (6) Lead dimension /Packing mode 4 D220 5 0200 6 0200 Single / Double-formed leads taped and ammo-packed. See p.5 to 6. 0200 (AMZ50V& Straight leads taped and ammo-packed. See p.5 to 6. AMC:C220) Straight leads type *1 The blank square signifies a straight lead type. *2 some types could bear different lead dimension codes, to be confirmed each case. As to reel packing, contact Nissei. *3 a code Cap471 to 393 in Model Code "0000"of AMC type shall be "1050". *4 a code Cap471 to 393 in Model Code "0000"of AMC type shall be "A210". (3) Rated Voltage (V.d.c,V.a.c) Voltage Code 25 35 50 63 100 125 200 250 275 315 400 450 630 800 1000 1250 1600 0025 0035 0050 0063 0100 0125 0200 0250 0275 0315 0400 0450 0450 0800 1000 1250 1600 (4) Capacitance Tolerance Code F G H J K M Tolerance (%) +/- 1 +/- 2 +/- 3 +/- 5 +/- 10 +/- 20 (5) Capacitance Code Capacitance (pF) expressed in 3-digit code. The first two digits: Significant figures of capacitance value. The third digit: The number of zeros to follow the significant figures. Coding Sample 1) Coding of: AMZ 50V, 0.10 microF, +/-5%, SINGLE formed, taped and ammo-packed AMZ V (1) (2) Internal use 0050 (3) J 104 (4) (5) 0000 0200 Model Code (6) (Standard "0000") 2) Coding of MMC 250V 1.0 F +/-10%, single formed with 15.0mm leads, in bulk MMC F (1) (2) Internal use 0250 K 105 (3) (4) (5) 0000 0150 Model Code (6) (Standard "0000") 3) Coding have: MMT 50V 0.1 microF +/-5%, straight lead (in bulk) MMT (1) 0050 (2) Internal use (3) J 104 (4) (5) 0000 0050 Model Code (6) (Standard "0000") When using our capacitors, please consider the application notes on pages 8-15 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics.